Advertisement

Normung

  • Bernard Becker
Chapter
Part of the VDI-Buch book series (VDI-BUCH)

Zusammenfassung

Die Industriegasturbine hat in den letzten Jahrzehnten eine dramatische Verbesserung ihrer Leistungerfahren. Gleichzeitig wurde durch Anhebung der Temperatur und der Komponentenwirkungsgrade der Wirkungsgrad des Kombiprozesses in die Nähe von 60% gebracht. Dies war nur durch den Einsatz leistungsfähiger Berechnungsverfahren, innovativer Materialien und ihrer höheren Ausnutzung möglich, weil sie nicht in ein festes Regelwerk von Gestaltungs- und Berechnungsvorgaben gezwängt wurden.

Literatur

  1. 1.
    ISO 3997, Part 1–9: Gas turbines – Procurement (1997) Google Scholar
  2. 2.
    EN 45510-5-2: Guide for procurement of power station equipment. Part 5-2: Gas turbines Google Scholar
  3. 3.
    ISO 1940-1: Mechanical vibration – Balance quality requirements of rigid rotors. Part 1: Determination of permissible residual unbalance (1986) Google Scholar
  4. 4.
    ISO 1940-2: Mechanical vibration – Balance quality requirements of rigid rotors. Part 2: Balance errors (1986) Google Scholar
  5. 5.
    ISO 2041: Vibration and shock – Vocabulary (1990) Google Scholar
  6. 6.
    ISO 2314: DAM1 Gas turbines – Acceptance test: Amendment 1: Combined cycle power and efficiency tests (1989) Google Scholar
  7. 7.
    ISO 3448: Industrial liquid lubricants – ISO viscosity classification (1993) Google Scholar
  8. 8.
    ISO 5348: Mechanical vibration and shock – Mechanical mounting of accelerometers (1987) Google Scholar
  9. 9.
    ISO 7919-1: Mechanical vibration of non-reciprocating machines – Measurement on rotating shafts and evaluation. Part 1: General guidelines (1986) Google Scholar
  10. 10.
    ISO 7919-1: Mechanical vibration non-reciprocating machines – Measurements on rotating shafts and evaluation criteria. Part 1: General guidelines (1996) Google Scholar
  11. 11.
    ISO 7919-2: Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria. Part 2: Large land-based steam turbine generator sets (1996) Google Scholar
  12. 12.
    ISO 7919-3: Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria. Part 3: Coupled industrial machines (1996) Google Scholar
  13. 13.
    ISO 7919-4: Mechanical vibration of non-reciprocating machines – Measurement on rotating shafts and evaluation. Part 4: Guidelines for gas turbines (1990) Google Scholar
  14. 14.
    ISO 7919-4: Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria. Part 4: Gas turbine sets (1996) Google Scholar
  15. 15.
    ISO 7919-5: Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria. Part 5: Machine sets in hydraulic power generating and pumping plants Google Scholar
  16. 16.
    ISO/DIS 10436: Petroleum and natural gas industries – General purpose steam turbines for refinery service (1993) Google Scholar
  17. 17.
    ISO/DIS 10439: Centrifugal compressors for the petroleum and gas industries (1996) Google Scholar
  18. 18.
    ISO/DIS 10442: Packaged integrally geared centrifugal air compressors for general refinery services Google Scholar
  19. 19.
    ISO 10494: Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method Google Scholar
  20. 20.
    ISO 10816-1: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 1: General guidelines (1995) Google Scholar
  21. 21.
    ISO 10816-2: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 2: Large land-based steam turbine generator sets in excess of 50 MW (1996) Google Scholar
  22. 22.
    ISO 10816-3: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 3: Industrial machines with normal power above 15 kW and nominal speeds between 120 r\(/\)min and 15 000 r\(/\)min when measured in situGoogle Scholar
  23. 23.
    ISO 10816-4: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 4: Gas turbine driven sets excluding aircraft derivatives Google Scholar
  24. 24.
    ISO 10816-5: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 5: Machine sets in hydraulic power generating and pumping plants Google Scholar
  25. 25.
    ISO 10816-6: Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts. Part 6: Reciprocating machines with power ratings above 100 kW (1995) Google Scholar
  26. 26.
    ISO 10817-1: Rotating shaft vibration measurement systems. Part 1: Relative and absolute signal sensing of radial vibration from rotating shafts Google Scholar
  27. 27.
    ISO 11042-1: Gas Turbines – Exhaust gas emission. Part 1: Measurement and evaluation (1996) Google Scholar
  28. 28.
    ISO 11086: Gas Turbines – Vocabulary (1996) Google Scholar
  29. 29.
    ISO 11342: Mechanical vibration – Balancing of flexible rotors (1994) Google Scholar
  30. 30.
    ISO/WD 13691: Special purpose gear units for refinery service (1996) Google Scholar
  31. 31.
    ISO/DIS 13709: Centrifugal pumps for general refinery service Google Scholar
  32. 32.
    DIN 31051: Instandhaltung; Begriffe und Maßnahmen Google Scholar
  33. 33.
    DIN 31054: Grundsätze zur Festlegung von Zeiten und zum Aufbau von Leitsystemen Google Scholar
  34. 34.
    CIMAC No. 16/1999: Guidelines for operation and maintenance contracts Google Scholar
  35. 35.
    ANSI B 16.5: Steel and alloy pipe flanges Google Scholar
  36. 36.
    ANSI B 16.11: Forged fittings Google Scholar
  37. 37.
    ANSI B 31.3: Chemical plant and petroleum refinery piping Google Scholar
  38. 38.
    ANSI B 1.301: General purpose pipe threads Google Scholar
  39. 39.
    API 614 STD: Lubrication systems Google Scholar
  40. 40.
    API 616 STD: Gas turbines for refinery services Google Scholar
  41. 41.
    API 671 STD: Special purpose couplings Google Scholar
  42. 42.
    ASME Boiler and Pressure Vessel Code, B PVC Section VIII, IX Pressure Vessels Division 1, 2 Google Scholar
  43. 43.
    AD Regelwerk, Arbeitsgemeinschaft Druckbehälter. Vereinigung der Technischen Überwachungsvereine Google Scholar
  44. 44.
    Verordnung über Druckbehälter, Druckgasbehälter und Füllanlagen (Druckbehälterverordnung). Carl Heymanns Google Scholar
  45. 45.
    DVGW Arbeitsblatt G 491 Google Scholar
  46. 46.
    ASTM A 123: Zinc (hot galvanised) coatings on products fabricated from rolled, pressed and forged steel shapes, plates, bars and strips Google Scholar
  47. 47.
    ASTM A 194: Carbon and alloy steel nuts for bolts for high-pressure and high-temperature service Google Scholar
  48. 48.
    ASTM A 307: Carbon steel externally threaded standard fasteners Google Scholar
  49. 49.
    NEPA 70, National electric code Google Scholar
  50. 50.
    NACE MR-0175-94 Google Scholar
  51. 51.
    Trend-Monitoring-Systeme für Gasturbinenanlagen. Ein Leitfaden für die Praxis. VDMA Fachgemeinschaft Kraftmaschinen Google Scholar
  52. 52.
    EN ISO 9001: Qualitätsmanagementsysteme – Modell zur Qualitätssicherung/QM-Darlegung in Design/Entwicklung, Produktion, Montage und Wartung (1994) Google Scholar
  53. 53.
    EN ISO 9002: Qualitätsmanagementsysteme – Modell zur Qualitätssicherung/QM-Darlegung in Produktion, Montage und Wartung (1994) Google Scholar

Copyright information

© Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature 2019

Authors and Affiliations

  • Bernard Becker
    • 1
  1. 1.Mülheim/RuhrDeutschland

Personalised recommendations