Centralized Optimal Controller Design

Chapter

Abstract

In this chapter, two centralized optimal control methods, namely, optimal fixed structure controllers (where PID controllers represent a special case) and H controllers, are proposed. Given that the control algorithms for an AO system are typically implemented in a computer system, the optimal controller design methods presented in this chapter are formulated directly in the discrete-time domain. In Section 8.1, a new multivariable PID controller design approach is proposed for discrete-time systems, where the optimal controller synthesis procedures are based on directly solving properly formulated LMIs. The experimental results show the effectiveness of the designed PID controller for the magnetic fluid deformable mirror (MFDM). The mixed-sensitivity H design approach is presented in Sect. 8.2 as the second centralized control method for MFDM-based AO systems. The controller developed using the mixed-sensitivity H design approach not only provides the desired performance in tracking the reference wavefront surface shapes using an MFDM but also limits the current inputs to the MFDM actuators and increases the robustness of resulting closed-loop system. Experimental results show that the MFDM in the closed-loop AO system can track both static and dynamic reference signals effectively. A summary of this chapter is presented in Sect. 8.3.

Keywords

Root Mean Square Controller Design Linear Matrix Inequality Average Root Mean Square Error Adaptive Optic System 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Apkarian P, Gahinet P, Becker G (2003) Fixed-order H control design via a partially augmented Lagrangian method. Int J Robust Nonlinear Control 13(12):1137–1148MATHCrossRefGoogle Scholar
  2. \( {\rm \AA} \)ström KJ, Hägglund T (2005) Advanced PID control. ISA-The Instrumentation, Systems, and Automation Society, PittsburghGoogle Scholar
  3. Bianchi FD, Mantz RJ, Christiansen CF (2008) Multivariable PID control with set-point weighting via BMI optimisation. Automatica 44:472–478MathSciNetCrossRefGoogle Scholar
  4. Cao YY, Lam J, Sun YX (1998) Static output feedback stabilization: an LMI approach. Automatica 34(12):1641–1645MATHCrossRefGoogle Scholar
  5. Chilali M, Gahinet P (1996) H design with pole placement constraints: an LMI approach. IEEE Trans Autom Control 41:358–367MathSciNetMATHCrossRefGoogle Scholar
  6. Cuzzola FA, Morari M (2002) An LMI approach for H analysis and control of discrete-time piecewise affine systems. Int J Control 75:1293–1301MathSciNetMATHCrossRefGoogle Scholar
  7. Gahinet P, Nemirovski A, Laub AJ, Chilali M (1995) LMI control toolbox. The MathWorks Inc., NatickGoogle Scholar
  8. Ghaoui LE, Oustry F, Aitram M (1997) A cone complementary linearization algorithm for static output feedback and related problem. IEEE Trans Autom Control 42:1171–1176MATHCrossRefGoogle Scholar
  9. Gu DW, Petkov PH, Konstantinov MM (2005) Robust control design with MATLAB. Springer, LondonMATHGoogle Scholar
  10. Hofer H, Artal P, Singer B, Aragon JL, Williams DR (2001) Dynamics of the eye’s aberration. J Opt Soc Am A 18(3):497–505CrossRefGoogle Scholar
  11. Lin C, Wang QG, Lee TH (2004) An improvement on multivariable PID controller design via iterative LMI approach. Automatica 40:519–525MathSciNetCrossRefGoogle Scholar
  12. MacFarlane AGJ, Belletrutti JJ (1973) The characteristic locus design method. Automatica 9:575–588MathSciNetMATHCrossRefGoogle Scholar
  13. Masubuchi I, Ohara A, Suda N (1998) LMI based controller synthesis: a unified formulation and solution. Int J Robust Nonlinear Control 8:669–686MathSciNetMATHCrossRefGoogle Scholar
  14. Mattei M (2001) Robust multivariable PID control for linear parameter varying systems. Automatica 37:1997–2003MATHCrossRefGoogle Scholar
  15. Morari M (1985) Robust stability of systems with integral control. IEEE Trans Autom Control 30(6):574–577MathSciNetMATHCrossRefGoogle Scholar
  16. Nwokah ODI, Perez RA (1983) The stability of linear multivariable systems. Int J Control 37:623–629MATHCrossRefGoogle Scholar
  17. O’Dwyer A (2006) Handbook of PI and PID controller tuning rules. Imperial College Press, LondonCrossRefGoogle Scholar
  18. Rotea MA (1993) The generalized H 2 control problem. Automatica 29:373–385MathSciNetMATHCrossRefGoogle Scholar
  19. Scherer C, Gahinet P, Chilali M (1997) Multiobjective output feedback control via LMI optimization. IEEE Trans Autom Control 42(7):896–907MathSciNetMATHCrossRefGoogle Scholar
  20. Zheng F, Wang QG, Lee TH (2003) On the design of multivariable PID controllers via LMI approach. Automatica 38:517–526CrossRefGoogle Scholar
  21. Zhou K, Doyle J, Golver K (1995) Robust and optimal control. Prentice Hall, Upper Saddle RiverGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  1. 1.Shanghai UniversityShanghaiChina, People’s Republic
  2. 2.University of TorontoTorontoCanada

Personalised recommendations