Electroacoustic Model Based Pneumatic Fill-Level Measurement for Fluids and Bulk Solids

  • R. Brunnader
  • G. Holler
Part of the Smart Sensors, Measurement and Instrumentation book series (SSMI, volume 1)

Abstract

Fill-level sensing remains an important issue in multiple fields of applications, ranging from industrial process control to applications in food storage, construction industry, and public and individual mobility. A main part of the established measurement methods provides satisfactory results only under consideration of a set of preconditions, and – especially in the automotive field – is competitive to modern methods only due to the low sensor cost.

Pneumatic level sensing methods have been proposed for fill-level measurement since many years, but usually have the disadvantage of providing accurate results only for perfectly sealed vessels. Hence, these methods cannot be applied to most automotive tank systems as well as to ventilated industrial tank systems. In order to make available the various benefits of pneumatic methods (independence on tank shape, tank orientation, bubble and foam formation, surface structure, ...) for these application fields, we propose a pneumatic gauging method based on an electroacoustic equivalent model approach that is capable of measuring both fill level and leakage extent of a ventilated tank system in one single step.

The following sections provide a background about fill-level estimation, an overview of pneumatic fill-level measurement and the results of initial evaluation measurements of the proposed method demonstrating the applicability of the novel method.

Keywords

Free Volume Fuel Tank Fill Level Helmholtz Resonator Tank System 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Vass, G.: The Principle of Level Measurement. Sensors Magazine (17) (2000)Google Scholar
  2. 2.
    Reverter, F., Li, X., Meijer, G.C.: Liquid-level measurement system based on a remote grounded capacitive sensor. Sensors and Actuators A 138, 1–8 (2007)CrossRefGoogle Scholar
  3. 3.
    Canbolat, H.: A Novel Level Measurement Technique Using Three Capacitve Sensors for Liquids. IEEE Transactions on Instrumentation and Measurement 58(10), 3762–3768 (2009)CrossRefGoogle Scholar
  4. 4.
    Shiratsuchi, T., Imaizumi, M., Naito, M.: High Accuracy Capacitance Type Fuel Sensing System. SAE Transactions 930359 (1993)Google Scholar
  5. 5.
    Khan, S.: A Non-Contact Capacitance Type Level Transducer for Liquid Characterization. In: Proceedings of the International Conference on Computer and Communication Engineering, Kuala Lumpur, Malaysia (2008)Google Scholar
  6. 6.
    Chen, L., Dong, X., Han, J., Ye, P.: Development of an Ultrasonic Instrument for the Sealed Container’s Liquid Level Measuremen. In: Proceedings of the 6th World Congress on Intelligent Control, Dalian, China (2006)Google Scholar
  7. 7.
    Dalci, K.B., Gulez, K., Mumcu, T.V.: The Design of the Measurement Circuit using Ultrasonic Sound Waves for Fuel Level of Automobile Tanks and the Detection of Bad Sectors of Tank by Neural Networks. In: SICE, Sapporo, Japan (2004)Google Scholar
  8. 8.
    Ooshima, A., Kobayashi, K., Watanabe, K.: Development of a noninvasive powder level switch by acoustic method. In: Proceedings SICE Annual Conference, Sapporo, Japan (2004)Google Scholar
  9. 9.
    Sai, B., Kastelein, B.: Highly Reliable and Accurate Level Radar for Automated Legal Custody Transfer and Inventory Management. In: Proceeding of the 2006 IEEE International Conference on Automation Science and Engineering, Shanghai (2006)Google Scholar
  10. 10.
    Weiß, M., Knöchel, R.: A Sub-Millimeter Accurate Microwave Multilevel Gauging System for Liquids in Tanks. IEEE Transactions on Microwave Theory and Techniques 49(2), 381–384 (2001)CrossRefGoogle Scholar
  11. 11.
    Watanabe, K., Takebayashi, Y.: Volume Measurement of Liquid in a Deformed Tank - Application to the Fuel Meter of Automobiles. SAE Transactions 871964 (October 1987)Google Scholar
  12. 12.
    Kobayashi, H., Watanabe, K., Kawa, E., Chen, Y.S., Ishizuka, H.: Gauging Fuel in Deformed Tanks by Pneumatic Methods – Application to Automobile Fuel Gauges. SAE Transactions 900467 900467 (February 1990)Google Scholar
  13. 13.
    Watanabe, K., Takebayashi, Y., Himmelblau, D.M.: Volume Measurement of Deformed Materials in Tanks. ISA Transactions 27(4), 9–19 (1988)Google Scholar
  14. 14.
    Nishizu, T., Ikeda, Y., Torikata, Y., Manmoto, S., Umehara, T., Mizukami, T.: Automatic, Continuous Food Volume Measurement with a Helmholtz Resonator. CIGR Journal of Scientific Research and Development III(Manuscript FP 01 004) (2001)Google Scholar
  15. 15.
    Imanishi, M., Nagashima, A., Moriyama, A., Ishii, Y.: Measurement of Combustion-Chamber Volume Using an Acoustic Resonance Technique. In: IMTC, Hamanatsu (1994)Google Scholar
  16. 16.
    Nakano, A., Torikata, Y., Yamashita, T., Sakamoto, T., Futaya, Y., Tateno, A., Nishizu, T.: Liquid volume measurement with a closed Helmholtz resonator under micro-gravity conditions. In: Cryogenics, vol. 46 (2006)Google Scholar
  17. 17.
    Betta, G., Pietrosanto, A., Scaglione, A.: A Gray-Code-Based Fiber Optic Liquid Level Transducer. IEEE Transactions on Instrumentation and Measurement 47(1), 174–178 (1998)CrossRefGoogle Scholar
  18. 18.
    Vázqzez, C., Gonzalo, A., Vargas, S., Montalvo, J.: Multi-sensor system using plastic optical fibers for intrinsically safe level measurements. Sensors and Actuators 116, 22–32 (2004)CrossRefGoogle Scholar
  19. 19.
    Longbottom, F., Eren, H.: Ultrasonic multiple-sensor solid level measurements. In: Proceedings IEEE Instrumentation and Measurement Technology Conference (IMTC), vol. 2, pp. 749–752 (1994)Google Scholar
  20. 20.
    Holler, G., Fuchs, A., Brasseur, G.: Fill level measurement in a closed vessel by monitoring pressure variations due to thermodynamic equilibrium perturbation. In: Proc. IEEE International Instrumentation and Measurement Technology Conference, Victoria, Canada, pp. 641–646 (2008)Google Scholar
  21. 21.
    Holler, G., Brunnader, R., Schweighofer, B., Wegleiter, H.: Pneumatic level-sensing for liquid, powdered and solid media storage tanks. In: Proc. Fourth International Conference on Sensing Technology, Lecce, Italy, pp. 488–491 (2010)Google Scholar
  22. 22.
    Brunnader, R., Holler, G.: Experimental Validation of a Leakage and Fill-level Estimation Method for Vented Tanks. In: Proceedings 5th International Conference on Sensing Technology, Palmerston North, New Zealand, pp. 395–398 (2011)Google Scholar
  23. 23.
    Brunnader, R., Holler, G.: A Novel Measurement Method for Quality Parameters of Wood Pellets. In: 37th Annual Conference of the IEEE Industrial Electronics Society, Melbourne, pp. 4643–4647 (2011)Google Scholar
  24. 24.
    Lerch, R., Sessler, G.M., Wolf, D.: Elektromechanische Ana-logien. In: Technische Akustik. Springer, Berlin (2009)CrossRefGoogle Scholar
  25. 25.
    Brunnader, R., Holler, G., Brasseur, G.: Model Verification and Parameter Evaluation for a Pneumatic Gauging Method for Vented Tanks. In: Instrumentation and Measurement Technology Conference (I2MTC), Hangzhou, pp. 1–6 (2011)Google Scholar
  26. 26.
    Holler, G., Brunnader, R., Schweighofer, B., Wegleiter, H.: Experimental Assessment of a Pneumatic Level-sensing Method for Closed Tanks Applied to Water and Wooden Pellets. Sensors & Transducers Journal 9(12/10), 151–160 (2010)Google Scholar
  27. 27.
    Brunnader, R., Holler, G.: Applicability evaluation of the pneumatic gauging method for automotive fuel tanks. In: Proc. IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012), Graz, Austria (2012)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  • R. Brunnader
    • 1
  • G. Holler
    • 1
  1. 1.Graz University of TechnologyGrazAustria

Personalised recommendations