Turbocharging Concepts

Introduction

The enacted average CO2 emission for new passenger vehicles in Europe is limited to 120 g/km from 2012 (65% produced vehicles) to 2015 (100%). This emission limit is reduced to the ambitious long-term target of 95 g/km from 2020. Additionally, the average CO2 emission limit for new light-duty commercial vehicles is 175 g/km from 2014 (70% manufactured vehicles) to 2017 (100%); and it is reduced to 147 g/km (ambitious long-term target) from 2020. To reduce carbon dioxide (CO2) and nitrogen oxides (NOx) exhausted by passenger and commercial vehicles and to improve the fuel consumption of the engines, we have already carried out many measures, e.g. high-pressure direct injection (HPDI), exhaust gas recirculation (EGR), variable valve train (VVT), variable compression (VC), and hybrid techniques [3]. Two other important aspects are downsizing of engines by reducing the number of cylinders or volumetric size of cylinders, and turbocharging. Engines with less number of cylinders or small cylinder volumes induce less friction power between the pistons and cylinders. Additionally, the total weight of the vehicle is also reduced due to small engines, leading to less driving friction. Evidently, small engines needs less fuel consumption; in turn, they produce less engine power. Small engines consume less fuel and therefore produce less carbon dioxide (CO2) and as well as nitrogen oxides (NOx). In the point of view of energy and air pollution, they have done a good job to sustain our energy resources and to keep the environment less polluted and clean.

Keywords

Mass Flow Rate Engine Speed Compressor Wheel Variable Turbine Geometry Automotive Turbocharger 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Baines, N.C.: Fundamentals of Turbocharging. Concepts ETI, Inc. (2005)Google Scholar
  2. 2.
    Basshuysen, R., et al.: Gasoline Engine with Direct Injection. Vieweg and Teubner (2009)Google Scholar
  3. 3.
    Golloch, R.: Downsizing bei Verbrennungsmotoren. Springer, Heidelberg (2005)Google Scholar
  4. 4.
    Heywood, J.B.: Internal Combustion Engine Fundamentals. McGraw-Hill (1988)Google Scholar
  5. 5.
    Japikse, D., Baines, N.C.: Introduction to Turbomachinery. Concepts ETI, Inc. (1994)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  1. 1.Platform Development Dept. ETBBosch Mahle Turbo Systems GmbH & Co. KGStuttgartGermany

Personalised recommendations