Advertisement

Effects of Different Physical Characteristics on the Compression Molding Quality of Dried Fish Floss

  • Hongmei Xu
  • Li Zong
  • Shengfa Yuan
Conference paper
Part of the IFIP Advances in Information and Communication Technology book series (IFIPAICT, volume 344)

Abstract

The compression molding of dried fish floss is of great significance to the development of fish product and the storage and transport of fish. In this issue, the compression ratio, relaxation ratio and shatter resistance are selected as the evaluation indicators, effects of particle size, moisture content, amount, and processing methods (whether cooked or not) on the compression molding quality of dried fish floss are analyzed. The results showed that: 1) the moisture content and amount of dried fish floss have a significant impact on the thickness of molding block, and the lower the moisture content is, the larger the thickness of molding block is, the thickness of molding block decreases with the amount of dried fish floss; 2) processing methods have great effect on the relaxation ratio of molding block, the relaxation ratio of molding block will increase if the dried fish floss is cooked;3) the amount and moisture content affect the shatter resistance of molding block observably, the greater the amount and moisture content of dried fish floss ,the better the shatter resistance of molding block is when the amount and moisture content respectively varies in the range of 3g-5g and 5.13% -23.57%.

Keywords

Dried Fish Floss Compression Molding Relaxation Ratio Shatter Resistance Moisture Content Particle Size 

References

  1. 1.
    Hu, J.J.: Straw Pellet Fuel Cold Molding by Compression Experimental Study and Numerical Simulation.Thesis for doctor degree, Dalian University of Technology (2008)Google Scholar
  2. 2.
    He, X.F., Lei, T.Z., Li, Z.F.: Experimental study on the cold forming technology of biomass pellet fuel. Acta Energiae Solaris Sinica 9, 937–941 (2006)Google Scholar
  3. 3.
    Wu, J., Sheng, K.C.: Experimental Studies on Chopping Cotton Stalk When Compressed to High Densities. Journal of Shihezi University (Natural Science) 7(3), 235–238 (2003)Google Scholar
  4. 4.
    Xing, L., Wang, S.Y., Liu, X.D.: Experiment and Analysis of Straw Compression. Journal of Jiamusi University (Natural Science Edition) 23(4), 574–576 (2005)Google Scholar
  5. 5.
    Wang, H.B., Wang, C.G.: Study on the Stress-relaxation of Hay. Journal of Agricultural Mechanization Research 1, 134–137 (2008)Google Scholar

Copyright information

© IFIP International Federation for Information Processing 2011

Authors and Affiliations

  • Hongmei Xu
    • 1
  • Li Zong
    • 1
  • Shengfa Yuan
    • 1
  1. 1.College of Engineering and TechnologyHuazhong Agricultural UniversityWuhanChina

Personalised recommendations