Advertisement

Effect of Surface Preparation on the Strength of FRP-to-Mild Steel and FRP-to-Stainless Steel Joints

  • S. J. Kim
  • S. T. Smith
  • B. Young
Conference paper

Abstract

A detailed understanding of the strength and behaviour of the bond between fibre-reinforced polymer (FRP) composites to metals is an ongoing field of research. The many different geometrical and material parameters make for extensive research demands. This paper in turn reports a series of tests on the shear strength and behaviour of FRP-to metal joints in which the main test parameters, which have received limited attention to date, consists of (i) type of metal (i.e. non-galvanised mild steel and stainless steel), and (ii) surface preparation technique (i.e. different mechanical abrasion methods). All specimens are loaded in displacement control which enables the failure process to be followed and identification of different failure modes to be made. The results enable the effectiveness of different surface preparation techniques upon the bond of FRP to different types of metals to be made.

Keywords

Failure Mode Mild Steel Surface Preparation Steel Joint Stainless Steel Specimen 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. ASTM D5573-99 (2005) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints, American Society for Testing and Materials (ASTM), USA.Google Scholar
  2. Hollaway, LC & Teng, JG 2008. Strengthening and rehabilitation of Civil Infrastructures using Fibre-reinforced Polymer (FRP) Composites, Woodhead Publishing, UK.CrossRefGoogle Scholar
  3. Kim, SJ, Smith ST, & Young B 2010. Effect of mechanical surface preparation on the strength and behaviour of FRP-to-mild steel and FRP-to-stainless steel joints, in preparation.Google Scholar
  4. Silvestre, N, Young, B & Camotim, D 2008. Non-linear behaviour and load-carrying capacity of CFRP-strengthened lipped channel steel columns, Eng. Struct., 30(10), 2613–2630.CrossRefGoogle Scholar
  5. Xia, SH & Teng, JG 2005. Behaviour of FRP-to-steel bonded joints, Proceeding, Third International Symposium on Bond Behaviour of FRP in Structure (BBFS 2005), Hong Kong, 7–9 December, pp. 419–426.Google Scholar
  6. Zhao, XL & Zhang, L 2007. State-of-the-art review on FRP strengthened steel structures, Eng. Struct., 29(8), 1808–1823.CrossRefGoogle Scholar

Copyright information

© Tsinghua University Press, Beijing and Springer-Verlag Berlin Heidelberg 2011

Authors and Affiliations

  • S. J. Kim
    • 1
  • S. T. Smith
    • 1
  • B. Young
    • 1
  1. 1.Department of Civil EngineeringThe University of Hong KongHong KongChina

Personalised recommendations