Marine Engine State Monitoring System Using Distributed Precedence Queue Mechanism in CAN Networks

  • Hyun Lee
  • Dong kyu Yi
  • Jun seok Lee
  • Gye-do Park
  • Jang Myung Lee
Part of the Lecture Notes in Computer Science book series (LNCS, volume 6424)

Abstract

This paper proposes a marine engine state monitoring system using distributed precedence queue mechanism which collects the state of bearings, temperature and pressure of engine through the CAN network. The CAN is developed by Bosch Corp. in the early 1980’. The data from various sensors attached in the marine engine are converted to digital by the analog to digital converter and formatted to fit the CAN protocol at the CAN module. All the CAN modules are connected to the SPU module for the efficient communication and processing. This design reduces the cost for wiring and improves the data transmission reliability by recognizing the sensor errors and data transmission errors. The distributed precedence queue mechanism is developed for the performance improvement of the marine engine system, which is demonstrated through the experiments.

Keywords

CAN (Controller Area Network) ESMS(Engine State Monitoring System) DPQ (Distributed Precedence Queue) 

References

  1. 1.
    Bosch: CAN Specification Version 2.0., Robert Bosch GmbH. Stuttgard (1991)Google Scholar
  2. 2.
    International Standard Organization, Road - vehicles Interchange of digital information - Controller area network for high-speed communication, ISO 11898 (November 1993)Google Scholar
  3. 3.
    Cena, G., Valenzano, A.: An Improved CAN Fieldbus for Industrial Application. IEEE Trans. on Industrial Electronics 44(4) (August 1997)Google Scholar
  4. 4.
    Hilmer, H., Kochs, H.D., Dittmar, E.: A Fault-Tolerant Communication Architecture for Real-Time Control System. In: IEEE International Workshop on Factory Communication System, pp. 111–118 (1997)Google Scholar
  5. 5.
    Corriganm, S.: Intriduction to the Controller Area Network, TI, Application Report, Texas (2002)Google Scholar
  6. 6.
    Farsi, M., Ratcliff, K., Barbosa, M.: An Overview of Controller Area Network. Computing and Control Engineering Journal 10(3), 113–120 (1999)CrossRefGoogle Scholar
  7. 7.
    Guerreoro, C.: Hardware Support for Fault Tolerance in Triple Redundant CAN Controllers. In: 9th International Conference on Electronics, Circuits and System, vol. 2, pp. 457–460 (2002)Google Scholar
  8. 8.
    Guerreoro, C.: Design and Implementation of a Redundancy Manager for Triple Redundant CAN Controllers. In: IEEE 28th Annual Conference of the Industrial Electronics Society, vol. 3, p. 2294–2299 (2002)Google Scholar
  9. 9.
    IEEE Standards for Local Area Networks, Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, ANSI/IEEE Std 802.3- ISO/DIS 8802/3 (1985)Google Scholar
  10. 10.
    Tindell, K., Burns, A.: Guaranteeing Message Latencies on Control Area Network (CAN). In: Proc. 1st International CAN Conference, Mainz, Germany (September 1994)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2010

Authors and Affiliations

  • Hyun Lee
    • 1
  • Dong kyu Yi
    • 1
  • Jun seok Lee
    • 2
  • Gye-do Park
    • 2
  • Jang Myung Lee
    • 2
  1. 1.herianaPusan National UniversityBusanKorea
  2. 2.Department of Electronics EngineeringPusan National UniversityBusanKorea

Personalised recommendations