Soccer Ball Aerodynamics

Chapter
Part of the Lecture Notes in Computational Science and Engineering book series (LNCSE, volume 72)

Abstract

This chapter describes an interesting new application of computational science to sports engineering. The flight of sports balls (and in particular soccer balls) through the air is often a key part of the sport. In this work the physics behind the flight of soccer balls is introduced and discussed. This includes basic concepts such as boundary layer separation and the Magnus Effect. Computational Fluid Dynamics (CFD) and trajectory simulations are then combined to assess the erratic nature of different soccer ball designs, including the 2006 World Cup ball. It is found that both the lift and side force coefficients on a low- or non-spinning soccer ball vary significantly with orientation, which can result in varying erratic trajectories. These trajectories can also vary strongly with ball design and with the initial orientation of the ball. Ball consistency is one property that is often commented on by professional players. It is found that the most consistent balls are the ones with the optimum combination of amplitude and frequency of the varying force coefficients relative to the amount of spin. With the recent introduction of new manufacturing techniques, it should be possible to tailor ball surface patterns to give some interesting ball flights or to optimise consistency.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    I. Newton. New theory of light and colours. Philosophical Transactions of the Royal Society, London, 80:3075–3087, 1672.Google Scholar
  2. 2.
    L. Prandtl. Über Flüssigkeitsbewegung bei sehr kleiner Reibung. In 3rd International Mathematical Congress, Heidelberg.Google Scholar
  3. 3.
    B. Massey. Mechanics of Fluids. Seventh Edition. Cheltenham, UK, 1998.Google Scholar
  4. 4.
    E. Achenbach. Experiments on the flow past spheres at very high reynolds numbers. Journal of Fluid Mechanics, 54:565–575, 1972.CrossRefGoogle Scholar
  5. 5.
    M. van Dyke. An album of fluid motion. Parabolic Press, Stanford, 1982.Google Scholar
  6. 6.
    S. Taneda. Visual observations on the flow past spheres at reynolds numbers between 10,000 and 1,000,000. Journal of Fluid Mechanics, 85:187–192, 1978.CrossRefGoogle Scholar
  7. 7.
    M.J. Carré, T. Asai, T. Akatsuka, and S.J. Haake. The curve kick of a football 2: flight through the air. Sports Engineering, 5:183–192, 2002.CrossRefGoogle Scholar
  8. 8.
    S. Barber, S.B. Chin, and M.J. Carré. Sports ball aerodynamics: a numerical study of the erratic motion of soccer balls. Computers and Fluids, 38(6):1091–1100, 2009.CrossRefGoogle Scholar
  9. 9.
    S. Barber. The aerodynamics of association footballs. PhD thesis, University of Sheffield, 2007.Google Scholar
  10. 10.
    J.M.T. Penrose, D.R. Hose, and E.A. Trowbridge. Cricket ball swing: a preliminary analysis using cfd. The Engineering of Sport, 1996.Google Scholar
  11. 11.
    K. Aoki, M. Nonaka, T. Goto, M. Miyamoto, and M. Sugiura. Effect of the dimple structure on the flying characteristics and flow patterns of a golf ball. In M. Hubbard, R.D. Mehta, and J.M. Pallis, editors, The Engineering of Sport 5, Davis, California, 2004.Google Scholar
  12. 12.
    H.C. Kim, K. Nakahashi, and H.J. Kim. Three-dimensional flow analysis around a cylinder with dimples. In Asia-Pacific Congress on Sports Technology, Tokyo, Japan, 2005. Australasian Sports Technology Alliance.Google Scholar
  13. 13.
    S. Barber, S. Seo, T. Asai, and M.J. Carré. Investigating the effects of orientation on the flight of a non-spinning soccer ball. In Asia-Pacific Congress on Sports Technology, Tokyo, Japan, 2007. Australasian Sports Technology Alliance.Google Scholar
  14. 14.
    T. Asai, K. Seo, O. Kobayashi, M. Ajiki, and S. Shiozawa. A fundamental study on aerodynamics of soccer ball. In 83rd Japan Society of Mechanical Engineering Conference (Fluid engineering division), 2005.Google Scholar
  15. 15.
    S. Barber, S.J. Haake, and M.J. Carré. Using cfd to understand the effect of seams on soccer ball aerodynamics. In E. Moritz and S.J. Haake, editors, The Engineering of Sport 6, Munich, Germany, 2006.Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2009

Authors and Affiliations

  1. 1.Sports Engineering Research GroupUniversity of SheffieldSheffieldUK

Personalised recommendations