Advertisement

Research on Acceleration and Deceleration Control Algorithm of NC Instruction Interpretations with High-Order Smooth

  • Fang Song
  • Shuanghui Hao
  • Minghui Hao
  • Zhimin Yang
Part of the Lecture Notes in Computer Science book series (LNCS, volume 5315)

Abstract

In order to solve the vibration problem of flexible system which the control order of CNC servo system is four orders or over four orders, one of the mainly effective methods is the characteristic of high-order smooth of the acc/dec (acceleration and deceleration) control instructions. According to the control theory of linear acc/dec, a novel acc/dec control algorithm based on moving-average is presented in this paper. The continuity of the acceleration curve can be obtained by using the proposed algorithm. Further, the curve of Jerk will also be continuous by extending the proposed algorithm. In practice, this algorithm is simple and needn’t solve the high-order equation. By extending this algorithm, the high-order smooth acceleration instruction can be achieved that is the important meaning to improve the machining accuracy of CNC system.

Keywords

NC instruction acc/dec control high-order smooth moving-average algorithm 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Bin, W., Zhe, L.: Preshaped input commands applied to minimizing the vibration of a multiple-modes system. J. Journal of Beijing Polytechnic University 20(3), 97–102 (1994)Google Scholar
  2. 2.
    Xingui, G., Decai, W., Congxin, L., et al.: A rapid and accurate positioning method with linear deceleration in servo system. J. International Journal of Machine Tools & Manufacture 42, 851–861 (2002)CrossRefGoogle Scholar
  3. 3.
    Shuang, C., Zexiang, L.: Applied motion control technology, pp. 279–297. Electric Industry Press, M. Beijing (2006)Google Scholar
  4. 4.
    Jeon, J.W., Ha, Y.Y.: A generalized approach for the acceleration and deceleration of industrial robots and CNC machine tools.C. IEEE Transactions on industrial electronics 47(1), 133–139 (2000)CrossRefGoogle Scholar
  5. 5.
    Erkorkmaz, K., Altintas, Y.: High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation. J. International Journal of Machine Tools & Manufacture 41, 1323–1345 (2001)CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2008

Authors and Affiliations

  • Fang Song
    • 1
  • Shuanghui Hao
    • 1
  • Minghui Hao
    • 1
  • Zhimin Yang
    • 1
  1. 1.School of Mechatronics EngHarbin Institute of TechnologyHarbinChina

Personalised recommendations