Correlation Between Densification and β - Phase Formation at Microwave Sintering of Si3n4 Ceramics
Conference paper
Keywords
Silicon Nitride Microwave Heating Average Pore Size Conventional Heating American Ceramic Society
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Preview
Unable to display preview. Download preview PDF.
References
- [1]Ashby MF, Verral RA (1973) Diffusion-accomodated flow and superplasticity. Acta met., 21, 2, pp. 149-163CrossRefGoogle Scholar
- [2]Bykov Yu, Eremeev A, Flyagin V, Kaurov V, Kuftin A, Luchinin A, Malygin O, Plotnikov I, Zapevalov V (1995) The gyrotron system for ceramics sintering. In: Clark DE, Folz DF, Oda SJ, Silberglitt R (eds) Microwaves: theory and application in materials processing III (Cer Trans, v.59, The American Ceramic Society, Westerville, OH), pp. 133-140Google Scholar
- [3]Bykov Yu, Eremeev A., Holoptsev V. (1996) Comparative study of Si3N4 - based ce-ramics sintering at frequencies 30 and 83 GHz. In: Iskander MF, Kiggans JO, Bo-lomey JC (eds) Microwave processing of materials V (Mater Res Soc Symp Proc v. 430, Pittsburgh, PA), pp. 613-618Google Scholar
- [4]Clarke DR, Ho WW (1983) Effect of intergranular phases on the high-frequency di-electric losses of silicon nitride ceramics. In: Yan MF, Hener AH (eds) Advances in ceramics, v. 7, Additives and interfaces in electron ceramics (The American Ceramic Society, Columbus, OH), pp. 246-252Google Scholar
- [5]Gazzara CP, Messier DR (1977) Determination of phase content of Si3N4 by X-ray dif-fraction analysis. In: Ceramic Bulletin, v. 56, pp. 777-780Google Scholar
- [6]Hirota M, Brito M, Hirao K, Watari K, Toriyama M, Nagaoka T (1996) Grain growth behavior during microwave annealing of silicon nitride. In: Iskander MF, Kiggans JO, Bolomey JC (eds) Microwave processing of materials V (Mater Res Soc Symp Proc v. 430, Pittsburgh, PA), pp. 441-445Google Scholar
- [7]Hirota M, Brito M, Hirao K, Watari K, Toriyama M, Nagaoka T (1997) Microwave sintering of silicon nitride with rare earth sesquioxide additions. In: Clark DE, Sut-ton WH, Lewis DA (eds) Microwaves: theory and appliation in materials processing IV (Cer Tran, v. 80, The American Ceramic Society, Westerville, OH), pp. 515-522Google Scholar
- [8]Kingery WD (1976) Introduction to ceramics. New York, Wiley.Google Scholar
- [9]Tiegs TN, Kiggans JO, Kimrey HD (1990) Microwave processing of silicon nitride. In: Snyder WB, Sutton WH, Iskander MF, Johnson DL (eds) Microwave processing of materials II (Mater Res Soc Symp Proc v. 189, Pittsburgh, PA), pp. 267-272Google Scholar
- [10]Tiegs TN, Kiggans JO, Lin HT, Willkens CA (1994) Comparison of properties of sin-tered and reaction-bonded silicon nitride fabricated by microwave and conventional heating. In: Iskander MF, Lauf RJ, Sutton WH (eds) Microwave processing of materi-als IV (Mater Res Soc Symp Proc v. 347, Pittsburgh, PA), pp. 501-506Google Scholar
- [11]Tikkanen MH, Makipirtti SA (1965), In: Inter Journal of Powder Metallurgy, vol 1, No 1, pp 15-19Google Scholar
- [12]Ueno T, Kinoshita S, Setsuhara Y, Makino Y, Miyake S, Sano S, Saito H (1999) Mil-limeter-wave sintering of Si3N4. In: Key Engineering Materials, vols 161-163, pp 45-48CrossRefGoogle Scholar
- [13]Ueno T, Makino Y, Miyake S, Sano S, Saito H (1999), 3rd intern. nano ceramic forum and 2nd intern. symp. on intermaterials (NCF 3 and IMA'99), Seoul, Korea, pp. 146-152Google Scholar
- [14]Wang J, Raj R (1990) Estimate of the activation energies for boundary diffusion from rate-controlled sintering of pure alumina, and alumina doped with zirconia or titania. In: Journal of the American Ceramic Society, vol 73, No 5, pp. 1172-1175CrossRefGoogle Scholar
- [15]Ziegler G, Heinrich J, Wotting G (1987) Relationships between processing, micro-structure and properties of dense and reaction-bonded silicon nitride. In: Journal of Material Science, No 22, pp 3041-3086Google Scholar
Copyright information
© Springer-Verlag Berlin Heidelberg 2006