Advertisement

Overview of Direct Liquid Oxidation Fuel Cells and its Application as Micro-Fuel Cells

  • R. Oliveira
  • J. Santander
  • R. Rego
Chapter

Abstract

Direct liquid fuel cells (DLFCs) are a special type of FCs that generate power output through the electro-oxidation of liquid fuels easier to handle and store than the hydrogen gas used in traditional FCs, thus increasing the range of possible applications. As electronic devices continue to evolve at the macroscale (mobile phones, laptops) and at the micro-scale (micro-electromechanical systems, wearables, and implantable devices), micro-fuel cells (μFCs) are considered as a promising alternatives to batteries as power sources.

In this chapter, the development of low-temperature micro-direct liquid fuel cells (μDLFCs) operating with methanol, ethanol, formic acid, ethylene glycol, glycerol, or glucose as fuel is reviewed, covering structural design, membranes and catalysts used, and power output performance.

The key limitations for world-wide commercialization of μDLFCs include the fabrication process, water management, fuel crossover through the membranes, and the low activity/durability/selectivity of the catalysts. At present, the state-of-the-art power output is about 100, 58.0, 45.0, 30.3, 39.5, and 0.0063 mW cm−2 for methanol, ethanol, formic acid, ethylene glycol, glycerol, and glucose as fuel in μFCs, respectively.

Future research prospects in this field regarding each of these fuels are presented, confirming the μDLFC potential to replace traditional batteries in most portable applications.

Keywords

Direct liquid fuel cells (DLFCs) Micro-direct liquid fuel cells (μDLFCs) Portable devices DLFC designs Micro and nano technologies (MNTs) Passive or active μDLFCs Catalysts Electrodes Membranes Membraneless Liquid fuels electro-oxidation μDMFC μDEFC μDFAFC μDEGFC μDGlyFC Implanted direct glucose fuel cell μDGFC Porous Pt electrodes μDLFC power density output 

References

  1. 1.
    Sadhasivam T, Dhanabalan K, Roh SH, Kim TH, Park KW, Jung S, Kurkuri MD, Jung HY (2017) A comprehensive review on unitized regenerative fuel cells: crucial challenges and developments. Int J Hydrog Energy 42:4415–4433.  https://doi.org/10.1016/j.ijhydene.2016.10.140CrossRefGoogle Scholar
  2. 2.
    Nguyen N-T, Chan SH (2006) Micromachined polymer electrolyte membrane and direct methanol fuel cells-a review. J Micromech Microeng 16:R1–R12.  https://doi.org/10.1088/0960-1317/16/4/R01CrossRefGoogle Scholar
  3. 3.
    Pichonat T, Gauthier-Manuel B (2007) Recent developments in MEMS-based miniature fuel cells. Microsyst Technol 13:1671–1678.  https://doi.org/10.1007/s00542-006-0342-5CrossRefGoogle Scholar
  4. 4.
    Sundarrajan S, Allakhverdiev SI, Ramakrishna S (2012) Progress and perspectives in micro direct methanol fuel cell. Int J Hydrog Energy 37:8765–8786.  https://doi.org/10.1016/j.ijhydene.2011.12.017CrossRefGoogle Scholar
  5. 5.
    Esquivel JP, Sabaté N, Santander J, Torres N, Cané C (2008) Fabrication and characterization of a passive silicon-based direct methanol fuel cell. Microsyst Technol 14:535–541.  https://doi.org/10.1007/s00542-007-0451-9CrossRefGoogle Scholar
  6. 6.
    Torres N, Santander J, Esquivel JP, Sabaté N, Figueras E, Ivanov P, Fonseca L, Gràcia I, Cané C (2008) Performance optimization of a passive silicon-based micro-direct methanol fuel cell. Sensors Actuators B Chem 132:540–544.  https://doi.org/10.1016/j.snb.2007.11.035CrossRefGoogle Scholar
  7. 7.
    Esquivel JP, Sabaté N, Santander J, Torres-Herrero N, Gràcia I, Ivanov P, Fonseca L, Cané C (2009) Influence of current collectors design on the performance of a silicon-based passive micro direct methanol fuel cell. J Power Sources 194:391–396.  https://doi.org/10.1016/j.jpowsour.2009.04.065CrossRefGoogle Scholar
  8. 8.
    Zhao TS, Chen R, Yang WW, Xu C (2009) Small direct methanol fuel cells with passive supply of reactants. J Power Sources 191:185–202.  https://doi.org/10.1016/j.jpowsour.2009.02.033CrossRefGoogle Scholar
  9. 9.
    Wang C, Waje M, Wang X, Tang JM, Haddon RC, Yan Y (2004) Proton exchange membrane fuel cells with carbon nanotube based electrodes. Nano Lett 4:345–348.  https://doi.org/10.1021/nl034952pCrossRefGoogle Scholar
  10. 10.
    Esquivel JP, Sabaté N, Tarancón A, Torres-Herrero N, Dávila D, Santander J, Gràcia I, Cané C (2009) Hybrid polymer electrolyte membrane for silicon-based micro fuel cells integration. J Micromech Microeng 19:65006  https://doi.org/10.1088/0960-1317/19/6/065006CrossRefGoogle Scholar
  11. 11.
    Torres N, Duch M, Santander J, Sabaté N, Esquivel JP, Tarancón A, Cané C (2009) Porous silicon membrane for micro fuel cell applications. J New Mater Electrochem Syst 12:93–96Google Scholar
  12. 12.
    Esquivel JP, Senn T, Hernández-Fernández P, Santander J, Lörgen M, Rojas S, Löchel B, Cané C, Sabaté N (2010) Towards a compact SU-8 micro-direct methanol fuel cell. J Power Sources 195:8110–8115.  https://doi.org/10.1016/j.jpowsour.2010.07.050CrossRefGoogle Scholar
  13. 13.
    Moghaddam S, Pengwang E, Jiang Y-B, Garcia AR, Burnett DJ, Brinker CJ, Masel RI, Shannon MA (2010) An inorganic-organic proton exchange membrane for fuel cells with a controlled nanoscale pore structure. Nat Nanotechnol 5:230–236.  https://doi.org/10.1038/nnano.2010.13CrossRefPubMedGoogle Scholar
  14. 14.
    Xing X, Cherevko S, Chung CH (2011) Porous Pd films as effective ethanol oxidation electrocatalysts in alkaline medium. Mater Chem Phys 126:36–40.  https://doi.org/10.1016/j.matchemphys.2010.12.027CrossRefGoogle Scholar
  15. 15.
    Kouassi S, Gautier G, Thery J, Desplobain S, Borella M, Ventura L, Laurent JY (2012) Proton exchange membrane micro fuel cells on 3D porous silicon gas diffusion layers. J Power Sources 216:15–21.  https://doi.org/10.1016/j.jpowsour.2012.05.046CrossRefGoogle Scholar
  16. 16.
    Sabaté N, Esquivel JP, Santander J, Hauer JG, Verjulio RW, Gràcia I, Salleras M, Calaza C, Figueras E, Cané C, Fonseca L (2014) New approach for batch microfabrication of silicon-based micro fuel cells. Microsyst Technol 20:341–348.  https://doi.org/10.1007/s00542-013-1781-4CrossRefGoogle Scholar
  17. 17.
    Kjeang E, Djilali N, Sinton D (2009) Microfluidic fuel cells: a review. J Power Sources 186:353–369.  https://doi.org/10.1016/j.jpowsour.2008.10.011CrossRefGoogle Scholar
  18. 18.
    Zebda A, Renaud L, Cretin M, Pichot F, Innocent C, Ferrigno R, Tingry S (2009) A microfluidic glucose biofuel cell to generate micropower from enzymes at ambient temperature. Electrochem Commun 11:592–595.  https://doi.org/10.1016/j.elecom.2008.12.036CrossRefGoogle Scholar
  19. 19.
    Mousavi Ehteshami SM, Asadnia M, Tan SN, Chan SH (2016) Paper-based membraneless hydrogen peroxide fuel cell prepared by micro-fabrication. J Power Sources 301:392–395.  https://doi.org/10.1016/j.jpowsour.2015.10.038CrossRefGoogle Scholar
  20. 20.
    Abrego-Martínez JC, Wang Y, Mendoza-Huizar LH, Ledesma-Garcia J, Cuevas-Muñiz FM, Mohamedi M, Arriaga LG (2016) Mixed-reactant ethanol fuel cell using an electrochemically deposited Ag@Pt tolerant cathode. Int J Hydrog Energy 41:23417–23424.  https://doi.org/10.1016/j.ijhydene.2016.09.032CrossRefGoogle Scholar
  21. 21.
    Tang Y, Yuan W, Pan M, Tang B, Li Z, Wan Z (2010) Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cell. J Power Sources 195:5628–5636.  https://doi.org/10.1016/j.jpowsour.2010.03.069CrossRefGoogle Scholar
  22. 22.
    Li X, Faghri A, Xu C (2010) Structural optimization of the direct methanol fuel cell passively fed with a high-concentration methanol solution. J Power Sources 195:8202–8208.  https://doi.org/10.1016/j.jpowsour.2010.06.041CrossRefGoogle Scholar
  23. 23.
    Feng Y, Gago A, Timperman L, Alonso-Vante N (2011) Chalcogenide metal centers for oxygen reduction reaction: activity and tolerance. Electrochim Acta 56:1009–1022.  https://doi.org/10.1016/j.electacta.2010.09.085CrossRefGoogle Scholar
  24. 24.
    Zhao X, Yin M, Ma L, Liang L, Liu C, Liao J, Lu T, Xing W (2011) Recent advances in catalysts for direct methanol fuel cells. Energy Environ Sci 4:2736–2753.  https://doi.org/10.1039/c1ee01307fCrossRefGoogle Scholar
  25. 25.
    Gago AS, Gochi-Ponce Y, Feng YJ, Esquivel JP, Sabaté N, Santander J, Alonso-Vante N (2012) Tolerant chalcogenide cathodes of membraneless micro fuel cells. ChemSusChem 5:1488–1494.  https://doi.org/10.1002/cssc.201200009CrossRefPubMedGoogle Scholar
  26. 26.
    Weiland M, Wagner S, Hahn R, Reichl H (2013) Design and evaluation of a passive self-breathing micro fuel cell for autonomous portable applications. Int J Hydrog Energy 38:440–446.  https://doi.org/10.1016/j.ijhydene.2012.09.117CrossRefGoogle Scholar
  27. 27.
    Xiaowei L, Chunguang S, Yufeng Z, Wei W, Xuebin L, Ding T (2006) Application of MEMS technology to micro direct methanol fuel cell. Proceedings of the 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS’06, pp 699–702Google Scholar
  28. 28.
    Scotti G, Kanninen P, Kallio T, Franssila S (2012) Integration of carbon felt gas diffusion layers in silicon micro fuel cells. J Micromech Microeng 22:94006.  https://doi.org/10.1088/0960-1317/22/9/094006CrossRefGoogle Scholar
  29. 29.
    Yeom J, Mozsgai GZ, Flachsbart BR, Choban ER, Asthana A, Shannon MA, Kenis PJA (2005) Microfabrication and characterization of a silicon-based millimeter scale, PEM fuel cell operating with hydrogen, methanol, or formic acid. Sensors Actuators B Chem 107:882–891.  https://doi.org/10.1016/j.snb.2004.12.050CrossRefGoogle Scholar
  30. 30.
    Chang CL, Chang TC, Ho WY, Hwang JJ, Wang DY (2006) Electrochemical performance of PEM fuel cell with Pt-Ru electro-catalyst layers deposited by sputtering. Surf Coat Technol 201:4442–4446.  https://doi.org/10.1016/j.surfcoat.2006.08.036CrossRefGoogle Scholar
  31. 31.
    Tang YH, Huang MJ, Shiao MH, Yang CR (2011) Fabrication of silicon nanopillar arrays and application on direct methanol fuel cell. Microelectron Eng 88:2580–2583.  https://doi.org/10.1016/j.mee.2010.12.075CrossRefGoogle Scholar
  32. 32.
    Jeng KT, Chien CC, Hsu NY, Yen SC, Chiou SD, Lin SH, Huang WM (2006) Performance of direct methanol fuel cell using carbon nanotube-supported Pt-Ru anode catalyst with controlled composition. J Power Sources 160:97–104.  https://doi.org/10.1016/j.jpowsour.2006.01.057CrossRefGoogle Scholar
  33. 33.
    Saha MS, Kundu A (2010) Functionalizing carbon nanotubes for proton exchange membrane fuel cells electrode. J Power Sources 195:6255–6261.  https://doi.org/10.1016/j.jpowsour.2010.04.015CrossRefGoogle Scholar
  34. 34.
    Varcoe JR, Slade RCT (2005) Prospects for alkaline anion-exchange membranes in low temperature fuel cells. Fuel Cells 5:187–200.  https://doi.org/10.1002/fuce.200400045CrossRefGoogle Scholar
  35. 35.
    Antolini E, Gonzalez ER (2010) Alkaline direct alcohol fuel cells. J Power Sources 195:3431–3450.  https://doi.org/10.1016/j.jpowsour.2009.11.145CrossRefGoogle Scholar
  36. 36.
    Yu EH, Wang X, Krewer U, Li L, Scott K (2012) Direct oxidation alkaline fuel cells: from materials to systems. Energy Environ Sci 5:5668–5680  https://doi.org/10.1039/C2EE02552CCrossRefGoogle Scholar
  37. 37.
    Varcoe JR, Atanassov P, Dekel DR, Herring AM, Hickner MA, Kohl PA, Kucernak AR, Mustain WE, Nijmeijer K, Scott K, Xu T, Zhuang L (2014) Anion-exchange membranes in electrochemical energy systems. Energy Environ Sci 7:3135–3191.  https://doi.org/10.1039/C4EE01303DCrossRefGoogle Scholar
  38. 38.
    Verjulio RW, Alcaide F, Álvarez G, Sabaté N, Torres-Herrero N, Esquivel JP, Santander J (2013) A micro alkaline direct ethanol fuel cell with platinum-free catalysts. J Micromech Microeng 23:115006.  https://doi.org/10.1088/0960-1317/23/11/115006CrossRefGoogle Scholar
  39. 39.
    Verjulio RW, Santander J, Sabaté N, Esquivel JP, Torres-Herrero N, Habrioux A, Alonso-Vante N (2014) Fabrication and evaluation of a passive alkaline membrane micro direct methanol fuel cell. Int J Hydrog Energy 39:5406–5413.  https://doi.org/10.1016/j.ijhydene.2013.12.014CrossRefGoogle Scholar
  40. 40.
    Verjulio RW, Santander J, Ma J, Alonso-Vante N (2016) Selective CoSe/C cathode catalyst for passive air-breathing alkaline anion exchange membrane μ-direct methanol fuel cell (AEM-μDMFC). Int J Hydrog Energy 41:19595–19600  https://doi.org/10.1016/j.ijhydene.2016.01.132CrossRefGoogle Scholar
  41. 41.
    Zhao TS, Yang WW, Chen R, Wu QX (2010) Towards operating direct methanol fuel cells with highly concentrated fuel. J Power Sources 195:3451–3462.  https://doi.org/10.1016/j.jpowsour.2009.11.140CrossRefGoogle Scholar
  42. 42.
    Li X, Faghri A (2013) Review and advances of direct methanol fuel cells (DMFCs) part I: design, fabrication, and testing with high concentration methanol solutions. J Power Sources 226:223–240.  https://doi.org/10.1016/j.jpowsour.2012.10.061CrossRefGoogle Scholar
  43. 43.
    Gago AS, Esquivel J-P, Sabate N, Santander J, Alonso-Vante N (2015) Comprehensive characterization and understanding of micro-fuel cells operating at high methanol concentrations. Beilstein J Nanotechnol 6:2000–2006  https://doi.org/10.3762/bjnano.6.203CrossRefPubMedPubMedCentralGoogle Scholar
  44. 44.
    Shimizu T, Momma T, Mohamedi M, Osaka T, Sarangapani S (2004) Design and fabrication of pumpless small direct methanol fuel cells for portable applications. J Power Sources 137:277–283.  https://doi.org/10.1016/j.jpowsour.2004.06.008CrossRefGoogle Scholar
  45. 45.
    Aravamudhan S, Rahman ARA, Bhansali S (2005) Porous silicon based orientation independent, self-priming micro direct ethanol fuel cell. Sensors Actuators A Phys 123–124:497–504.  https://doi.org/10.1016/j.sna.2005.03.069CrossRefGoogle Scholar
  46. 46.
    Chan SH, Nguyen N-T, Xia Z, Wu Z (2005) Development of a polymeric micro fuel cell containing laser-micromachined flow channels. J Micromech Microeng 15:231–236  https://doi.org/10.1088/0960-1317/15/1/032CrossRefGoogle Scholar
  47. 47.
    Schmitz A, Tranitz M, Wagner S, Hahn R, Hebling C (2003) Planar self-breathing fuel cells. J Power Sources 118:162–171.  https://doi.org/10.1016/S0378-7753(03)00080-6CrossRefGoogle Scholar
  48. 48.
    Kamarudin SK, Achmad F, Daud WRW (2009) Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices. Int J Hydrog Energy 34:6902–6916.  https://doi.org/10.1016/j.ijhydene.2009.06.013CrossRefGoogle Scholar
  49. 49.
    Abrego-Martínez JC, Moreno-Zuria A, Cuevas-Muñiz FM, Arriaga LG, Sun S, Mohamedi M (2017) Design, fabrication and performance of a mixed-reactant membraneless micro direct methanol fuel cell stack. J Power Sources 371:10–17.  https://doi.org/10.1016/j.jpowsour.2017.10.026CrossRefGoogle Scholar
  50. 50.
    Kauranen PS, Skou E (1996) Mixed methanol oxidation/oxygen reduction currents on a carbon supported Pt catalyst. J Electroanal Chem 408:189–198.  https://doi.org/10.1016/0022-0728(96)04515-9CrossRefGoogle Scholar
  51. 51.
    Piela B, Olson TS, Atanassov P, Zelenay P (2010) Highly methanol-tolerant non-precious metal cathode catalysts for direct methanol fuel cell. Electrochim Acta 55:7615–7621.  https://doi.org/10.1016/j.electacta.2009.11.085CrossRefGoogle Scholar
  52. 52.
    Abrego-Martínez JC, Wang Y, Ledesma-García J, Cuevas-Muñiz FM, Arriaga LG, Mohamedi M (2017) A pulsed laser synthesis of nanostructured bi-layer platinum-silver catalyst for methanol-tolerant oxygen reduction reaction. Int J Hydrog Energy 42:28056–28062.  https://doi.org/10.1016/j.ijhydene.2017.02.165CrossRefGoogle Scholar
  53. 53.
    Yuan Z, Yang J, Zhang Y, Zhang X (2015) The optimization of air-breathing micro direct methanol fuel cell using response surface method. Energy 80:340–349.  https://doi.org/10.1016/j.energy.2014.11.076CrossRefGoogle Scholar
  54. 54.
    Falcão DS, Oliveira VB, Rangel CM, Pinto AMFR (2014) Review on micro-direct methanol fuel cells. Renew Sust Energ Rev 34:58–70.  https://doi.org/10.1016/j.rser.2014.03.004CrossRefGoogle Scholar
  55. 55.
    Lamy C, Lima A, LeRhun V, Delime F, Coutanceau C, Léger JM (2002) Recent advances in the development of direct alcohol fuel cells (DAFC). J Power Sources 105:283–296.  https://doi.org/10.1016/s0378-7753(01)00954-5CrossRefGoogle Scholar
  56. 56.
    Tiwari JN, Tiwari RN, Singh G, Kim KS (2013) Recent progress in the development of anode and cathode catalysts for direct methanol fuel cells. Nano Energy 2:553–578.  https://doi.org/10.1016/j.nanoen.2013.06.009CrossRefGoogle Scholar
  57. 57.
    Vijh AK (1975) Electrocatalysis of the anodic oxidation of methanol by metals. J Catal 37:410–415.  https://doi.org/10.1016/0021-9517(75)90177-3CrossRefGoogle Scholar
  58. 58.
    Bagotzky VS, Vassiliev YB, Khazova OA (1977) Generalized scheme of chemisorption, electrooxidation and electroreduction of simple organic compounds on platinum group metals. J Electroanal Chem 81:229–238.  https://doi.org/10.1016/S0022-0728(77)80019-3CrossRefGoogle Scholar
  59. 59.
    Antolini E (2009) Palladium in fuel cell catalysis. Energy Environ Sci 2:915–931.  https://doi.org/10.1039/b820837aCrossRefGoogle Scholar
  60. 60.
    Wang H, Xu C, Cheng F, Zhang M, Wang S, Jiang SP (2008) Pd/Pt core-shell nanowire arrays as highly effective electrocatalysts for methanol electrooxidation in direct methanol fuel cells. Electrochem Commun 10:1575–1578.  https://doi.org/10.1016/j.elecom.2008.08.011CrossRefGoogle Scholar
  61. 61.
    Tripkovic AV, Popovic KD, Grgur BN, Blizanac B, Ross PN, Markovi NM (2002) Methanol electrooxidation on supported Pt and PtRu catalysts in acid and alkaline solutions. Electrochim Acta 47:3707–3714.  https://doi.org/10.1016/S0013-4686(02)00340-7CrossRefGoogle Scholar
  62. 62.
    Demirci UB (2007) Theoretical means for searching bimetallic alloys as anode electrocatalysts for direct liquid-feed fuel cells. J Power Sources 173:11–18.  https://doi.org/10.1016/j.jpowsour.2007.04.069CrossRefGoogle Scholar
  63. 63.
    Patel PP, Datta MK, Jampani PH, Hong D, Poston JA, Manivannan A, Kumta PN (2015) High performance and durable nanostructured TiN supported Pt –Ru anode catalyst for direct methanol fuel cell (DMFC). J Power Sources 293:437–446.  https://doi.org/10.1016/j.jpowsour.2015.05.051CrossRefGoogle Scholar
  64. 64.
    Alcaide F, Álvarez G, Cabot PL, Genova-Koleva R, Grande HJ, Miguel O (2017) Effect of the solvent in the catalyst ink preparation on the properties and performance of unsupported PtRu catalyst layers in direct methanol fuel cells. Electrochim Acta 231:529–538.  https://doi.org/10.1016/j.electacta.2017.02.127CrossRefGoogle Scholar
  65. 65.
    Xu C, Cheng L, Shen P, Liu Y (2007) Methanol and ethanol electrooxidation on Pt and Pd supported on carbon microspheres in alkaline media. Electrochem Commun 9:997–1001.  https://doi.org/10.1016/j.elecom.2006.12.003CrossRefGoogle Scholar
  66. 66.
    Karim NA, Kamarudin SK (2013) An overview on non-platinum cathode catalysts for direct methanol fuel cell. Appl Energy 103:212–220.  https://doi.org/10.1016/j.apenergy.2012.09.031CrossRefGoogle Scholar
  67. 67.
    Mahajan A, Banik S, Roy PS, Chowdhury SR, Bhattacharya SK (2017) Kinetic parameters of anodic oxidation of methanol in alkali: effect of diameter of Pd nano-catalyst, composition of electrode and solution and mechanism of the reaction. Int J Hydrog Energy 42:21263–21278.  https://doi.org/10.1016/j.ijhydene.2017.07.058CrossRefGoogle Scholar
  68. 68.
    Deng H, Zhang Y, Zheng X, Li Y, Zhang X, Liu X (2015) A CNT (carbon nanotube) paper as cathode gas diffusion electrode for water management of passive μ-DMFC (micro-direct methanol fuel cell) with highly concentrated methanol. Energy 82:236–241.  https://doi.org/10.1016/j.energy.2015.01.034CrossRefGoogle Scholar
  69. 69.
    Xue R, Zhang Y, Liu X (2017) A novel cathode gas diffusion layer for water management of passive μ-DMFC. Energy 139:535–541  https://doi.org/10.1016/j.energy.2017.08.016CrossRefGoogle Scholar
  70. 70.
    Wang M, Liu L, Wang X (2017) A novel proton exchange membrane based on sulfo functionalized porous silicon for monolithic integrated micro direct methanol fuel cells. Sensors Actuators B Chem 253:621–629.  https://doi.org/10.1016/j.snb.2017.06.173CrossRefGoogle Scholar
  71. 71.
    Falcão DS, Pereira JP, Rangel CM, Pinto AMFR (2015) Development and performance analysis of a metallic passive micro-direct methanol fuel cell for portable applications. Int J Hydrog Energy 40:5408–5415.  https://doi.org/10.1016/j.ijhydene.2015.01.034CrossRefGoogle Scholar
  72. 72.
    Falcão DS, Pereira JP, Pinto AMFR (2016) Effect of stainless steel meshes on the performance of passive micro direct methanol fuel cells. Int J Hydrog Energy 41:13859–13867.  https://doi.org/10.1016/j.ijhydene.2016.05.059CrossRefGoogle Scholar
  73. 73.
    Hsieh SS, Ho CC, Hung LC (2016) Performance tests of a double-passive μDMFC stack with parallel/dendrite flow field. Renew Energy 90:28–37.  https://doi.org/10.1016/j.renene.2015.12.056CrossRefGoogle Scholar
  74. 74.
    Zhang Y, Xue R, Zhang X, Song J, Liu X (2015) RGO deposited in stainless steel fiber felt as mass transfer barrier layer for μ-DMFC. Energy 91:1081–1086.  https://doi.org/10.1016/j.energy.2015.09.026CrossRefGoogle Scholar
  75. 75.
    Yuan Z, Zhang M, Zuo K, Ren Y (2018) The effect of gravity on inner transport and cell performance in passive micro direct methanol fuel cell. Energy 150:28–37  https://doi.org/10.1016/j.energy.2018.02.132CrossRefGoogle Scholar
  76. 76.
    Deng H, Zhang Y, Li Y, Zhang X, Liu X (2013) A CNT-MEA compound structure of micro-direct methanol fuel cell for water management. Microelectron Eng 110:288–291.  https://doi.org/10.1016/j.mee.2013.02.013CrossRefGoogle Scholar
  77. 77.
    Deng H, Zhang X, Ma Z, Chen H, Sun Q, Zhang Y, Liu X (2014) A micro passive direct methanol fuel cell with high performance via plasma electrolytic oxidation on aluminum-based substrate. Energy 78:149–153.  https://doi.org/10.1016/j.energy.2014.09.070CrossRefGoogle Scholar
  78. 78.
    Zhou Y, Wang X, Guo X, Qiu X, Liu L (2012) A water collecting and recycling structure for silicon-based micro direct methanol fuel cells. Int J Hydrog Energy 37:967–976.  https://doi.org/10.1016/j.ijhydene.2011.03.086CrossRefGoogle Scholar
  79. 79.
    Baranton S, Coutanceau C, Léger JM, Roux C, Capron P (2005) Alternative cathodes based on iron phthalocyanine catalysts for mini- or micro-DMFC working at room temperature. Electrochim Acta 51:517–525.  https://doi.org/10.1016/j.electacta.2005.05.010CrossRefGoogle Scholar
  80. 80.
    Wang SJ, Huo WW, Zou ZQ, Qiao YJ, Yang H (2011) Computational simulation and experimental evaluation on anodic flow field structures of micro direct methanol fuel cells. Appl Therm Eng 31:2877–2884.  https://doi.org/10.1016/j.applthermaleng.2011.05.013CrossRefGoogle Scholar
  81. 81.
    Hashim N, Kamarudin SK, Daud WRW (2009) Design, fabrication and testing of a PMMA-based passive single-cell and a multi-cell stack micro-DMFC. Int J Hydrog Energy 34:8263–8269.  https://doi.org/10.1016/j.ijhydene.2009.07.043CrossRefGoogle Scholar
  82. 82.
    Zhang Q, Wang X, Zhong L, Zhou Y, Qiu X, Liu L (2009) Design, optimization and microfabrication of a micro-direct methanol fuel cell with microblocks in anode structure. Sensors Actuators A Phys 154:247–254.  https://doi.org/10.1016/j.sna.2008.07.008CrossRefGoogle Scholar
  83. 83.
    Lu GQ, Wang CY, Yen TJ, Zhang X (2004) Development and characterization of a silicon-based micro direct methanol fuel cell. Electrochim Acta 49:821–828.  https://doi.org/10.1016/j.electacta.2003.09.036CrossRefGoogle Scholar
  84. 84.
    Yuan Z, Zhang Y, Leng J, Gao Y, Liu X (2012) Development of a 4-cell air-breathing micro direct methanol fuel cell stack. J Power Sources 202:134–142.  https://doi.org/10.1016/j.jpowsour.2011.10.090CrossRefGoogle Scholar
  85. 85.
    Wang Z, Zhang X, Nie L, Zhang Y, Liu X (2014) Elimination of water flooding of cathode current collector of micro passive direct methanol fuel cell by superhydrophilic surface treatment. Appl Energy 126:107–112.  https://doi.org/10.1016/j.apenergy.2014.03.029CrossRefGoogle Scholar
  86. 86.
    Ghayor R, Shakeri M, Sedighi K, Farhadi M (2010) Experimental and numerical investigation on passive and active μDMFC. Int J Hydrog Energy 35:9329–9337  https://doi.org/10.1016/j.ijhydene.2009.09.066CrossRefGoogle Scholar
  87. 87.
    Seo YH, Cho YH (2009) Micro direct methanol fuel cells and their stacks using a polymer electrolyte sandwiched by multi-window microcolumn electrodes. Sensors Actuators A Phys 150:87–96.  https://doi.org/10.1016/j.sna.2008.12.009CrossRefGoogle Scholar
  88. 88.
    Peng HC, Chen PH, Chen HW, Chieng CC, Yeh TK, Pan C, Tseng FG (2010) Passive cathodic water/air management device for micro-direct methanol fuel cells. J Power Sources 195:7349–7358.  https://doi.org/10.1016/j.jpowsour.2010.05.007CrossRefGoogle Scholar
  89. 89.
    Qiao H, Kunimatsu M, Okada T (2005) Pt catalyst configuration by a new plating process for a micro tubular DMFC cathode. J Power Sources 139:30–34.  https://doi.org/10.1016/j.jpowsour.2004.07.003CrossRefGoogle Scholar
  90. 90.
    Li Y, Zhang X, Nie L, Zhang Y, Liu X (2014) Stainless steel fiber felt as cathode diffusion backing and current collector for a micro direct methanol fuel cell with low methanol crossover. J Power Sources 245:520–528.  https://doi.org/10.1016/j.jpowsour.2013.06.122CrossRefGoogle Scholar
  91. 91.
    Xue R, Sang S, Jin H, Shen Q, Zhang Y, Liu X, Zhang X (2014) Stainless steel fiber felt as the anode diffusion backing and current collector for μ-DMFC. Microelectron Eng 119:159–163.  https://doi.org/10.1016/j.mee.2014.02.006CrossRefGoogle Scholar
  92. 92.
    Fang S, Zhang Y, Ma Z, Zou Y, Liu X (2016) Development of a micro direct methanol fuel cell with heat control. Energy 116:978–985.  https://doi.org/10.1016/j.energy.2016.10.034CrossRefGoogle Scholar
  93. 93.
    Falcão DS, Oliveira VB, Rangel CM, Pinto AMFR (2015) Experimental and modeling studies of a micro direct methanol fuel cell. Renew Energy 74:464–470.  https://doi.org/10.1016/j.renene.2014.08.043CrossRefGoogle Scholar
  94. 94.
    Yuan Z, Yang J, Zhang Y, Wang S, Xu T (2015) Mass transport optimization in the anode diffusion layer of a micro direct methanol fuel cell. Energy 93:599–605.  https://doi.org/10.1016/j.energy.2015.09.067CrossRefGoogle Scholar
  95. 95.
    Yuan Z, Yang J, Li X, Wang S (2016) The micro-scale analysis of the micro direct methanol fuel cell. Energy 100:10–17.  https://doi.org/10.1016/j.energy.2016.01.057CrossRefGoogle Scholar
  96. 96.
    Weinmueller C, Tautschnig G, Hotz N, Poulikakos D (2010) A flexible direct methanol micro-fuel cell based on a metalized, photosensitive polymer film. J Power Sources 195:3849–3857.  https://doi.org/10.1016/j.jpowsour.2009.12.092CrossRefGoogle Scholar
  97. 97.
    Zhong L, Wang X, Jiang Y, Zhang Q, Qiu X, Zhou Y, Liu L (2008) A micro-direct methanol fuel cell stack with optimized design and microfabrication. Sensors Actuators A Phys 143:70–76.  https://doi.org/10.1016/j.sna.2007.06.045CrossRefGoogle Scholar
  98. 98.
    Wang X, Zhu Y, Shen C, Zhou Y, Wu X, Liu L (2012) A novel assembly method using multi-layer bonding technique for micro direct methanol fuel cells and their stack. Sensors Actuators A Phys 188:246–254.  https://doi.org/10.1016/j.sna.2012.02.007CrossRefGoogle Scholar
  99. 99.
    Zhang Y, Zhang P, He H, Zhang B, Yuan Z, Liu X, Cui H (2011) A self-breathing metallic micro-direct methanol fuel cell with the improved cathode current collector. Int J Hydrog Energy 36:857–868.  https://doi.org/10.1016/j.ijhydene.2010.10.039CrossRefGoogle Scholar
  100. 100.
    Hsieh SS, Wu HC, Her BS (2012) Design, fabrication and characterization of micro-electro mechanical system based micro direct methanol fuel cell stacks. Sensors Actuators A Phys 187:57–66.  https://doi.org/10.1016/j.sna.2012.08.026CrossRefGoogle Scholar
  101. 101.
    Zhang B, Zhang Y, He H, Li J, Yuan Z, Na C, Liu X (2010) Development and performance analysis of a metallic micro-direct methanol fuel cell for high-performance applications. J Power Sources 195:7338–7348.  https://doi.org/10.1016/j.jpowsour.2010.05.011CrossRefGoogle Scholar
  102. 102.
    D’Urso C, Baglio V, Antonucci V, Aricò AS, Specchia S, Icardi UA, Saracco G, Spinella C, D’Arrigo G (2011) Development of a planar μDMFC operating at room temperature. Int J Hydrog Energy 36:8088–8093  https://doi.org/10.1016/j.ijhydene.2011.01.109CrossRefGoogle Scholar
  103. 103.
    Deng H, Sang S, Zhang Y, Li Z, Liu X (2013) Investigations of silicon-based air-breathing micro direct methanol fuel cells with different anode flow fields. Microelectron Eng 111:180–184.  https://doi.org/10.1016/j.mee.2013.03.143CrossRefGoogle Scholar
  104. 104.
    Shen M, Walter S, Dovat L, Gijs MAM (2011) Planar micro-direct methanol fuel cell prototyped by rapid powder blasting. Microelectron Eng 88:1884–1886.  https://doi.org/10.1016/j.mee.2010.12.079CrossRefGoogle Scholar
  105. 105.
    Chu YH, Shul YG (2010) Combinatorial investigation of Pt-Ru-Sn alloys as an anode electrocatalysts for direct alcohol fuel cells. Int J Hydrog Energy 35:11261–11270.  https://doi.org/10.1016/j.ijhydene.2010.07.062CrossRefGoogle Scholar
  106. 106.
    Liang J, Luo Y, Zheng S, Wang D (2017) Enhance performance of micro direct methanol fuel cell by in situ CO removal using novel anode flow field with superhydrophobic degassing channels. J Power Sources 351:86–95  https://doi.org/10.1016/j.jpowsour.2017.03.099CrossRefGoogle Scholar
  107. 107.
    Falcão DS, Silva RA, Rangel CM, AMFR P (2017) Performance of an active micro direct methanol fuel cell using reduced catalyst loading MEAs. Energies 10:1683  https://doi.org/10.3390/en10111683CrossRefGoogle Scholar
  108. 108.
    Cha HY, Choi HG, Nam JD, Lee Y, Cho SM, Lee ES, Lee JK, Chung CH (2004) Fabrication of all-polymer micro-DMFCs using UV-sensitive photoresist. Electrochim Acta 50:795–799.  https://doi.org/10.1016/j.electacta.2004.01.117CrossRefGoogle Scholar
  109. 109.
    Lu Y, Reddy RG (2011) Effect of flow fields on the performance of micro-direct methanol fuel cells. Int J Hydrog Energy 36:822–829.  https://doi.org/10.1016/j.ijhydene.2010.10.029CrossRefGoogle Scholar
  110. 110.
    Yuan Z, Yang J, Li Z, Sun Y, Ye N, Shen H (2015) Analysis of CO transmission in a micro direct methanol fuel cell. Energy 83:496–502  https://doi.org/10.1016/j.energy.2015.02.053CrossRefGoogle Scholar
  111. 111.
    Yang J, Yuan Z, Shen H, Li X, Di J, Mo J (2016) Influence of anode flow field on mass transport in a air-breathing micro direct methanol fuel cell. Proceedings of the 2016 IEEE 11th Conference on Industrial Electronics and Applications, ICIEA 2016, pp 1843–1846Google Scholar
  112. 112.
    Yuan Z, Zhang Y, Fu W, Wang Z, Zhang X, Liu X (2014) Hydrophilicity effect on micro-scale flow of μDMFC. Microelectron Eng 119:131–136  https://doi.org/10.1016/j.mee.2014.03.024CrossRefGoogle Scholar
  113. 113.
    Yuan Z, Fu W, Zhao Y, Li Z, Zhang Y, Liu X (2013) Investigation of μDMFC (micro direct methanol fuel cell) with self-adaptive flow rate. Energy 55:1152–1158.  https://doi.org/10.1016/j.energy.2013.03.056CrossRefGoogle Scholar
  114. 114.
    Yao SC, Tang X, Hsieh CC, Alyousef Y, Vladimer M, Fedder GK, Amon CH (2006) Micro-electro-mechanical systems (MEMS)-based micro-scale direct methanol fuel cell development. Energy 31:636–649.  https://doi.org/10.1016/j.energy.2005.10.016CrossRefGoogle Scholar
  115. 115.
    Kamarudin MZF, Kamarudin SK, Masdar MS, Daud WRW (2013) Review: direct ethanol fuel cells. Int J Hydrog Energy 38:9438–9453.  https://doi.org/10.1016/j.ijhydene.2012.07.059CrossRefGoogle Scholar
  116. 116.
    An L, Zhao TS, Chen R, Wu QX (2011) A novel direct ethanol fuel cell with high power density. J Power Sources 196:6219–6222.  https://doi.org/10.1016/j.jpowsour.2011.03.040CrossRefGoogle Scholar
  117. 117.
    Yang CC, Lee YJ, Chiu SJ, Lee KT, Chien WC, Lin CT, Huang CA (2008) Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC). J Appl Electrochem 38:1329–1337  https://doi.org/10.1007/s10800-008-9563-xCrossRefGoogle Scholar
  118. 118.
    Yang CC, Chiu SJ, Lee KT, Chien WC, Lin CT, Huang CA (2008) Study of poly(vinyl alcohol)/titanium oxide composite polymer membranes and their application on alkaline direct alcohol fuel cell. J Power Sources 184:44–51.  https://doi.org/10.1016/j.jpowsour.2008.06.011CrossRefGoogle Scholar
  119. 119.
    Tadanaga K, Furukawa Y, Hayashi A, Tatsumisago M (2010) Direct ethanol fuel cell using hydrotalcite clay as a hydroxide ion conductive electrolyte. Adv Mater 22:4401–4404.  https://doi.org/10.1002/adma.201001766CrossRefPubMedGoogle Scholar
  120. 120.
    Xu JB, Zhao TS, Shen SY, Li YS (2010) Stabilization of the palladium electrocatalyst with alloyed gold for ethanol oxidation. Int J Hydrog Energy 35:6490–6500.  https://doi.org/10.1016/j.ijhydene.2010.04.016CrossRefGoogle Scholar
  121. 121.
    Xu JB, Zhao TS, Li YS, Yang WW (2010) Synthesis and characterization of the Au-modified Pd cathode catalyst for alkaline direct ethanol fuel cells. Int J Hydrog Energy 35:9693–9700.  https://doi.org/10.1016/j.ijhydene.2010.06.074CrossRefGoogle Scholar
  122. 122.
    Tsang CHA, Leung DYC (2018) Use of Pd-Pt loaded graphene aerogel on nickel foam in direct ethanol fuel cell. Solid State Sci 75:21–26.  https://doi.org/10.1016/j.solidstatesciences.2017.11.005CrossRefGoogle Scholar
  123. 123.
    ÜnlÜ M, Abbott D, Ramaswamy N, Ren X, Mukerjee S, Kohl PA (2011) Analysis of double layer and adsorption effects at the alkaline polymer electrolyte-electrode interface. J Electrochem Soc 158:B1423–B1431  https://doi.org/10.1149/2.075111jesCrossRefGoogle Scholar
  124. 124.
    Fujiwara N, Siroma Z, Yamazaki S, Ioroi T, Senoh H, Yasuda K (2008) Direct ethanol fuel cells using an anion exchange membrane. J Power Sources 185:621–626.  https://doi.org/10.1016/j.jpowsour.2008.09.024CrossRefGoogle Scholar
  125. 125.
    Datta J, Dutta A, Biswas M (2012) Enhancement of functional properties of PtPd nano catalyst in metal-polymer composite matrix: application in direct ethanol fuel cell. Electrochem Commun 20:56–59.  https://doi.org/10.1016/j.elecom.2012.02.022CrossRefGoogle Scholar
  126. 126.
    Varela FJR, Savadogo O (2009) Ethanol-tolerant Pt-alloy cathodes for direct ethanol fuel cell (DEFC) applications. Asia-Pacific J Chem Eng 4:17–24  https://doi.org/10.1002/apj.193CrossRefGoogle Scholar
  127. 127.
    An L, Zhao TS, Xu JB (2011) A bi-functional cathode structure for alkaline-acid direct ethanol fuel cells. Int J Hydrog Energy 36:13089–13095.  https://doi.org/10.1016/j.ijhydene.2011.07.025CrossRefGoogle Scholar
  128. 128.
    Li YS, Zhao TS (2011) A high-performance integrated electrode for anion-exchange membrane direct ethanol fuel cells. Int J Hydrog Energy 36:7707–7713.  https://doi.org/10.1016/j.ijhydene.2011.03.090CrossRefGoogle Scholar
  129. 129.
    An L, Zhao TS (2011) An alkaline direct ethanol fuel cell with a cation exchange membrane. Energy Environ Sci 4:2213–2217  https://doi.org/10.1039/c1ee00002kCrossRefGoogle Scholar
  130. 130.
    Shen S, Zhao TS, Xu J, Li Y (2011) High performance of a carbon supported ternary PdIrNi catalyst for ethanol electro-oxidation in anion-exchange membrane direct ethanol fuel cells. Energy Environ Sci 4:1428–1433.  https://doi.org/10.1039/c0ee00579gCrossRefGoogle Scholar
  131. 131.
    An L, Zhao TS, Zeng L, Yan XH (2014) Performance of an alkaline direct ethanol fuel cell with hydrogen peroxide as oxidant. Int J Hydrog Energy 39:2320–2324.  https://doi.org/10.1016/j.ijhydene.2013.11.072CrossRefGoogle Scholar
  132. 132.
    An L, Zhao TS (2011) Performance of an alkaline-acid direct ethanol fuel cell. Int J Hydrog Energy 36:9994–9999.  https://doi.org/10.1016/j.ijhydene.2011.04.150CrossRefGoogle Scholar
  133. 133.
    Wang ED, Zhao TS, Yang WW (2010) Poly (vinyl alcohol)/3-(trimethylammonium) propyl-functionalized silica hybrid membranes for alkaline direct ethanol fuel cells. Int J Hydrog Energy 35:2183–2189.  https://doi.org/10.1016/j.ijhydene.2009.12.179CrossRefGoogle Scholar
  134. 134.
    Shen SY, Zhao TS, Wu QX (2012) Product analysis of the ethanol oxidation reaction on palladium-based catalysts in an anion-exchange membrane fuel cell environment. Int J Hydrog Energy 37:575–582.  https://doi.org/10.1016/j.ijhydene.2011.09.077CrossRefGoogle Scholar
  135. 135.
    Li YS, Zhao TS (2012) Ultra-low catalyst loading cathode electrode for anion-exchange membrane fuel cells. Int J Hydrog Energy 37:15334–15338.  https://doi.org/10.1016/j.ijhydene.2012.07.119CrossRefGoogle Scholar
  136. 136.
    Yu X, Pickup PG (2008) Recent advances in direct formic acid fuel cells (DFAFC). J Power Sources 182:124–132.  https://doi.org/10.1016/j.jpowsour.2008.03.075CrossRefGoogle Scholar
  137. 137.
    Jayashree RS, Spendelow JS, Yeom J, Rastogi C, Shannon MA, Kenis PJA (2005) Characterization and application of electrodeposited Pt, Pt/Pd, and Pd catalyst structures for direct formic acid micro fuel cells. Electrochim Acta 50:4674–4682.  https://doi.org/10.1016/j.electacta.2005.02.018CrossRefGoogle Scholar
  138. 138.
    Yeom J, Jayashree RS, Rastogi C, Shannon MA, Kenis PJA (2006) Passive direct formic acid microfabricated fuel cells. J Power Sources 160:1058–1064.  https://doi.org/10.1016/j.jpowsour.2006.02.066CrossRefGoogle Scholar
  139. 139.
    Wang T, Zeng Y, Zhao Z, Guo H (2015) A micro direct formic acid fuel cell with PDMS fluid flow plates. Key Eng Mater 645–646:724–729  https://doi.org/10.4028/www.scientific.net/KEM.645-646.724CrossRefGoogle Scholar
  140. 140.
    Ha S, Adams B, Masel RI (2004) A miniature air breathing direct formic acid fuel cell. J Power Sources 128:119–124.  https://doi.org/10.1016/j.jpowsour.2003.09.071CrossRefGoogle Scholar
  141. 141.
    Cai W, Liang L, Zhang Y, Xing W, Liu C (2013) Real contribution of formic acid in direct formic acid fuel cell: investigation of origin and guiding for micro-structure design. Int J Hydrog Energy 38:212–218  https://doi.org/10.1016/j.ijhydene.2012.09.155CrossRefGoogle Scholar
  142. 142.
    Rejal SZ, Masdar MS, Kamarudin SK (2014) A parametric study of the direct formic acid fuel cell (DFAFC) performance and fuel crossover. Int J Hydrog Energy 39:10267–10274.  https://doi.org/10.1016/j.ijhydene.2014.04.149CrossRefGoogle Scholar
  143. 143.
    Qiao H, Shiroishi H, Okada T (2007) Passive micro tubular direct formic acid fuel cells (DFAFCs) with chemically assembled Pd anode nano-catalysts on polymer electrolytes. Electrochim Acta 53:59–65.  https://doi.org/10.1016/j.electacta.2007.01.046CrossRefGoogle Scholar
  144. 144.
    Jayashree RS, Gancs L, Choban ER, Primak A, Natarajan D, Markoski LJ, Kenis PJA (2005) Air-breathing laminar flow-based microfluidic fuel cell. J Am Chem Soc 127:16758–16759  https://doi.org/10.1021/ja054599kCrossRefPubMedGoogle Scholar
  145. 145.
    Shaegh SAM, Nguyen NT, Chan SH (2012) Air-breathing microfluidic fuel cell with fuel reservoir. J Power Sources 209:312–317  https://doi.org/10.1016/j.jpowsour.2012.02.115CrossRefGoogle Scholar
  146. 146.
    Chu KL, Gold S, Subramanian VR, Lu C, Shannon MA, Masel RI (2006) A nanoporous silicon membrane electrode assembly for on-chip micro fuel cell applications. J Microelectromech Syst 15:671–677  https://doi.org/10.1109/JMEMS.2006.872223CrossRefGoogle Scholar
  147. 147.
    An L, Chen R (2016) Recent progress in alkaline direct ethylene glycol fuel cells for sustainable energy production. J Power Sources 329:484–501.  https://doi.org/10.1016/j.jpowsour.2016.08.105CrossRefGoogle Scholar
  148. 148.
    An L, Chai ZH, Zeng L, Tan P, Zhao TS (2013) Mathematical modeling of alkaline direct ethanol fuel cells. Int J Hydrog Energy 38:14067–14075.  https://doi.org/10.1016/j.ijhydene.2013.08.080CrossRefGoogle Scholar
  149. 149.
    Bianchini C, Shen PK (2009) Palladium-based electrocatalysts for alcohol oxidation in half cells and in direct alcohol fuel cells. Chem Rev 109:4183–4206.  https://doi.org/10.1021/cr9000995CrossRefPubMedGoogle Scholar
  150. 150.
    Matsuoka K, Iriyama Y, Abe T, Matsuoka M, Ogumi Z (2005) Electro-oxidation of methanol and ethylene glycol on platinum in alkaline solution: poisoning effects and product analysis. Electrochim Acta 51:1085–1090.  https://doi.org/10.1016/j.electacta.2005.06.002CrossRefGoogle Scholar
  151. 151.
    Ma S, Sadakiyo M, Luo R, Heima M, Yamauchi M, Kenis PJA (2016) One-step electrosynthesis of ethylene and ethanol from CO in an alkaline electrolyzer. J Power Sources 301:219–228  https://doi.org/10.1016/j.jpowsour.2015.09.124CrossRefGoogle Scholar
  152. 152.
    Zheng MY, Wang AQ, Ji N, Pang JF, Wang XD, Zhang T (2010) Transition metal-tungsten bimetallic catalysts for the conversion of cellulose into ethylene glycol. ChemSusChem 3:63–66.  https://doi.org/10.1002/cssc.200900197CrossRefPubMedGoogle Scholar
  153. 153.
    Arjona N, Palacios A, Moreno-Zuria A, Guerra-Balcázar M, Ledesma-Garcia J, Arriaga LG (2014) AuPd/polyaniline as the anode in an ethylene glycol microfluidic fuel cell operated at room temperature. Chem Commun 50:8151–8153.  https://doi.org/10.1039/c4cc03288hCrossRefGoogle Scholar
  154. 154.
    Maya-Cornejo J, Ortiz-Ortega E, Álvarez-Contreras L, Arjona N, Guerra-Balcázar M, Ledesma-García J, Arriaga LG (2015) Copper–palladium core–shell as an anode in a multi-fuel membraneless nanofluidic fuel cell: toward a new era of small energy conversion devices. Chem Commun 51:2536–2539  https://doi.org/10.1039/c4cc08529aCrossRefGoogle Scholar
  155. 155.
    Martins CA, Ibrahim OA, Pei P, Kjeang E (2018) Towards a fuel-flexible direct alcohol microfluidic fuel cell with flow-through porous electrodes: assessment of methanol, ethylene glycol and glycerol fuels. Electrochim Acta 271:537–543  https://doi.org/10.1016/j.electacta.2018.03.197CrossRefGoogle Scholar
  156. 156.
    An L, Zeng L, Zhao TS (2013) An alkaline direct ethylene glycol fuel cell with an alkali-doped polybenzimidazole membrane. Int J Hydrog Energy 38:10602–10606.  https://doi.org/10.1016/j.ijhydene.2013.06.042CrossRefGoogle Scholar
  157. 157.
    An L, Zhao TS, Shen SY, Wu QX, Chen R (2010) Performance of a direct ethylene glycol fuel cell with an anion-exchange membrane. Int J Hydrog Energy 35:4329–4335.  https://doi.org/10.1016/j.ijhydene.2010.02.009CrossRefGoogle Scholar
  158. 158.
    Anitha M, Kamarudin SK, Kofli NT (2016) The potential of glycerol as a value-added commodity. Chem Eng J 295:119–130.  https://doi.org/10.1016/j.cej.2016.03.012CrossRefGoogle Scholar
  159. 159.
    Palma LM, Almeida TS, Morais C, Napporn TW, Kokoh KB, de Andrade AR (2017) Effect of the Co-catalyst on the selective electrooxidation of glycerol over ruthenium based nanomaterials. ChemElectroChem 4:39–45  https://doi.org/10.1002/celc.201600406CrossRefGoogle Scholar
  160. 160.
    Simões M, Baranton S, Coutanceau C (2012) Electrochemical valorisation of glycerol. ChemSusChem 5:2106–2124.  https://doi.org/10.1002/cssc.201200335CrossRefPubMedGoogle Scholar
  161. 161.
    Kwon Y, Hersbach TJP, Koper MTM (2014) Electro-oxidation of glycerol on platinum modified by adatoms: activity and selectivity effects. Top Catal 57:1272–1276.  https://doi.org/10.1007/s11244-014-0292-6CrossRefGoogle Scholar
  162. 162.
    Livshits V, Peled E (2006) Progress in the development of a high-power, direct ethylene glycol fuel cell (DEGFC). J Power Sources 161:1187–1191.  https://doi.org/10.1016/j.jpowsour.2006.04.141CrossRefGoogle Scholar
  163. 163.
    Maya-Cornejo J, Guerra-Balcázar M, Arjona N, Álvarez-Contreras L, FJR V, Gurrola MP, Ledesma-García J, Arriaga LG (2016) Electrooxidation of crude glycerol as waste from biodiesel in a nanofluidic fuel cell using Cu@Pd/C and Cu@Pt/C. Fuel 183:195–205  https://doi.org/10.1016/j.fuel.2016.06.075CrossRefGoogle Scholar
  164. 164.
    Dector A, Cuevas-Muñiz FM, Guerra-Balcázar M, Godínez LA, Ledesma-García J, Arriaga LG (2013) Glycerol oxidation in a microfluidic fuel cell using Pd/C and Pd/MWCNT anodes electrodes. Int J Hydrog Energy 38:12617–12622.  https://doi.org/10.1016/j.ijhydene.2012.12.030CrossRefGoogle Scholar
  165. 165.
    Noh HB, Naveen MH, Choi YJ, Choe ES, Shim YB (2015) Implantable nonenzymatic glucose/O micro film fuel cells assembled with hierarchical AuZn electrodes. Chem Commun 51:6659–6662  https://doi.org/10.1039/c5cc01567gCrossRefGoogle Scholar
  166. 166.
    Santiago Ó, Navarro E, Raso MA, Leo TJ (2016) Review of implantable and external abiotically catalysed glucose fuel cells and the differences between their membranes and catalysts. Appl Energy 179:497–522.  https://doi.org/10.1016/j.apenergy.2016.06.136CrossRefGoogle Scholar
  167. 167.
    Santoro C, Arbizzani C, Erable B, Ieropoulos I (2017) Microbial fuel cells: from fundamentals to applications. A review. J Power Sources 356:225–244.  https://doi.org/10.1016/j.jpowsour.2017.03.109CrossRefPubMedPubMedCentralGoogle Scholar
  168. 168.
    Kerzenmacher S, Ducrée J, Zengerle R, von Stetten F (2008) Energy harvesting by implantable abiotically catalyzed glucose fuel cells. J Power Sources 182:1–17.  https://doi.org/10.1016/j.jpowsour.2008.03.031CrossRefGoogle Scholar
  169. 169.
    Rapoport BI, Kedzierski JT, Sarpeshkar R (2012) A glucose fuel cell for implantable brain-machine interfaces. PLoS One 7:1–15.  https://doi.org/10.1371/journal.pone.0038436CrossRefGoogle Scholar
  170. 170.
    Oncescu V, Erickson D (2013) High volumetric power density, non-enzymatic, glucose fuel cells. Sci Rep 3:1226.  https://doi.org/10.1038/srep01226CrossRefPubMedPubMedCentralGoogle Scholar
  171. 171.
    Drake RF, Messinger S, Matsuda S, Kusserow BK (1970) A tissue implantable fuel cell power supply. Trans Am Soc Artif Intern Organs 16:199–205PubMedGoogle Scholar
  172. 172.
    Jiang T, Yan L, Meng Y, Xiao M, Wu Z, Tsiakaras P, Song S (2015) Glucose electrooxidation in alkaline medium: performance enhancement of PdAu/C synthesized by NH modified pulse microwave assisted polyol method. Appl Catal B Environ 162:275–281  https://doi.org/10.1016/j.apcatb.2014.06.045CrossRefGoogle Scholar
  173. 173.
    Mahoney EG, Sheng W, Cheng M, Lee KX, Yan Y, Chen JG (2016) Analyzing the electrooxidation of ethylene glycol and glucose over platinum-modified gold electrocatalysts in alkaline electrolyte using in-situ infrared spectroscopy. J Power Sources 305:89–96.  https://doi.org/10.1016/j.jpowsour.2015.11.059CrossRefGoogle Scholar
  174. 174.
    Brouzgou A, Song S, Tsiakaras P (2014) Carbon-supported PdSn and Pd Sn anodes for glucose electrooxidation in alkaline media. Appl Catal B Environ 158–159:209–216  https://doi.org/10.1016/j.apcatb.2014.03.051CrossRefGoogle Scholar
  175. 175.
    Elouarzaki K, Le Goff A, Holzinger M, Thery J, Cosnier S (2012) Electrocatalytic oxidation of glucose by rhodium porphyrin-functionalized MWCNT electrodes: application to a fully molecular catalyst-based glucose/O fuel cell. J Am Chem Soc 134:14078–14085  https://doi.org/10.1021/ja304589mCrossRefPubMedGoogle Scholar
  176. 176.
    Kloke A, Köhler C, Zengerle R, Kerzenmacher S (2012) Porous platinum electrodes fabricated by cyclic electrodeposition of PtCu alloy: application to implantable glucose fuel cells. J Phys Chem C 116:19689–19698.  https://doi.org/10.1021/jp306168tCrossRefGoogle Scholar
  177. 177.
    Frei M, Erben J, Martin J, Zengerle R, Kerzenmacher S (2017) Nanofiber-deposited porous platinum enables glucose fuel cell anodes with high current density in body fluids. J Power Sources 362:168–173.  https://doi.org/10.1016/j.jpowsour.2017.07.001CrossRefGoogle Scholar
  178. 178.
    Hu C, Song L, Zhang Z, Chen N, Feng Z, Qu L (2015) Tailored graphene systems for unconventional applications in energy conversion and storage devices. Energy Environ Sci 8:31–54  https://doi.org/10.1039/c4ee02594fCrossRefGoogle Scholar
  179. 179.
    Dai L, Chang DW, Baek J-B, Lu W (2012) Carbon nanomaterials for advanced energy conversion and storage. Small 8:1130–1166.  https://doi.org/10.1002/smll.201101594CrossRefPubMedGoogle Scholar
  180. 180.
    Do UP, Seland F, Maharbiz MM, Wang K, Johannesen Ø, Johannessen EA (2016) Thin film nanoporous electrodes for the selective catalysis of oxygen in abiotically catalysed micro glucose fuel cells. J Mater Sci 51:9095–9107.  https://doi.org/10.1007/s10853-016-0162-7CrossRefGoogle Scholar
  181. 181.
    Kerzenmacher S, Ducrée J, Zengerle R, von Stetten F (2008) An abiotically catalyzed glucose fuel cell for powering medical implants: reconstructed manufacturing protocol and analysis of performance. J Power Sources 182:66–75.  https://doi.org/10.1016/j.jpowsour.2008.03.049CrossRefGoogle Scholar
  182. 182.
    Oncescu V, Erickson D (2011) A microfabricated low cost enzyme-free glucose fuel cell for powering low-power implantable devices. J Power Sources 196:9169–9175.  https://doi.org/10.1016/j.jpowsour.2011.06.100CrossRefGoogle Scholar
  183. 183.
    Kerzenmacher S, Schroeder M, Brämer R, Zengerle R, von Stetten F (2010) Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 1: nickel-free glucose oxidation anodes. J Power Sources 195:6516–6523.  https://doi.org/10.1016/j.jpowsour.2010.04.039CrossRefGoogle Scholar
  184. 184.
    Kerzenmacher S, Kräling U, Metz T, Zengerle R, Von Stetten F (2011) A potentially implantable glucose fuel cell with Raney-platinum film electrodes for improved hydrolytic and oxidative stability. J Power Sources 196:1264–1272.  https://doi.org/10.1016/j.jpowsour.2010.08.019CrossRefGoogle Scholar
  185. 185.
    Kerzenmacher S, Kräling U, Schroeder M, Brämer R, Zengerle R, von Stetten F (2010) Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 2: glucose-tolerant oxygen reduction cathodes. J Power Sources 195:6524–6531.  https://doi.org/10.1016/j.jpowsour.2010.04.049CrossRefGoogle Scholar
  186. 186.
    Kloke A, Köhler C, Gerwig R, Zengerle R, Kerzenmacher S (2012) Cyclic electrodeposition of PtCu alloy: facile fabrication of highly porous platinum electrodes. Adv Mater 24:2916–2921.  https://doi.org/10.1002/adma.201200806CrossRefPubMedPubMedCentralGoogle Scholar
  187. 187.
    Kloke A, Köhler C, Dryzga A, Gerwig R, Schumann K, Ade M, Zengerle R, Kerzenmacher S (2013) Fabrication of highly porous platinum by cyclic electrodeposition of PtCu alloys: how do process parameters affect morphology. J Electrochem Soc 160:D111–D118  https://doi.org/10.1149/2.001304jesCrossRefGoogle Scholar
  188. 188.
    Köhler C, Kloke A, Drzyzga A, Zengerle R, Kerzenmacher S (2013) Fabrication of highly porous platinum electrodes for micro-scale applications by pulsed electrodeposition and dealloying. J Power Sources 242:255–263.  https://doi.org/10.1016/j.jpowsour.2013.05.035CrossRefGoogle Scholar
  189. 189.
    Frei M, Köhler C, Dietel L, Martin J, Wiedenmann F, Zengerle R, Kerzenmacher S (2018) Pulsed electro-deposition of highly porous Pt-alloys for use in methanol, formic acid, and glucose fuel cells. ChemElectroChem 5:1013–1023  https://doi.org/10.1002/celc.201800035CrossRefGoogle Scholar
  190. 190.
    Qazzazie D, Yurchenko O, Urban S, Kieninger J, Urban G (2017) Platinum nanowires anchored on graphene-supported platinum nanoparticles as a highly active electrocatalyst towards glucose oxidation for fuel cell applications. Nanoscale 9:6436–6447  https://doi.org/10.1039/c7nr01391dCrossRefPubMedGoogle Scholar
  191. 191.
    Yang YJ, Li W, Zi J (2013) Mechanistic study of glucose oxidation on copper sulfide modified glassy carbon electrode. Electrochem Commun 34:304–307.  https://doi.org/10.1016/j.elecom.2013.07.012CrossRefGoogle Scholar
  192. 192.
    Kloke A, Biller B, Krälling U, Kerzenmacher S, Zengerle R, Von Stetten F (2011) A single layer glucose fuel cell intended as power supplying coating for medical implants. Fuel Cells 11:316–326.  https://doi.org/10.1002/fuce.201000114CrossRefGoogle Scholar
  193. 193.
    Köhler C, Frei M, Zengerle R, Kerzenmacher S (2014) Performance loss of a Pt-based implantable glucose fuel cell in simulated tissue and cerebrospinal fluids. ChemElectroChem 1:1895–1900.  https://doi.org/10.1002/celc.201402138CrossRefGoogle Scholar
  194. 194.
    Yang L, Zhang Y, Chu M, Deng W, Tan Y, Ma M, Su X, Xie Q, Yao S (2014) Facile fabrication of network film electrodes with ultrathin Au nanowires for nonenzymatic glucose sensing and glucose/O2 fuel cell. Biosens Bioelectron 52:105–110.  https://doi.org/10.1016/j.bios.2013.08.038CrossRefPubMedGoogle Scholar
  195. 195.
    Slaughter G, Sunday J (2014) A membraneless single compartment abiotic glucose fuel cell. J Power Sources 261:332–336.  https://doi.org/10.1016/j.jpowsour.2014.03.090CrossRefGoogle Scholar
  196. 196.
    Sharma T, Hu Y, Stoller M, Feldman M, Ruoff RS, Ferrari M, Zhang X (2011) Mesoporous silica as a membrane for ultra-thin implantable direct glucose fuel cells. Lab Chip 11:2460–2465.  https://doi.org/10.1039/c1lc20119kCrossRefPubMedGoogle Scholar
  197. 197.
    Köhler C, Bleck L, Frei M, Zengerle R, Kerzenmacher S (2015) Poisoning of highly porous platinum electrodes by amino acids and tissue fluid constituents. ChemElectroChem 2:1785–1793.  https://doi.org/10.1002/celc.201500215CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  1. 1.CQ-VR, University of Trás-os-Montes e Alto DouroVila RealPortugal
  2. 2.Instituto de Microelectrónica de Barcelona, IMB-CNM (CSIC), Campus UABBellaterra (Barcelona)Spain
  3. 3.Chemistry Department and CQ-VRUniversity of TrÃs-os-Montes e Alto DouroVila RealPortugal

Personalised recommendations