Advertisement

Electrocatalysis of Alternative Liquid Fuels for PEM Direct Oxidation Fuel Cells

  • Ayan Mukherjee
  • Harikrishnan Narayanan
  • Suddhasatwa Basu
Chapter

Abstract

The direct oxidation of liquid fuels such as methanol, ethanol, ethylene glycol, formic acid and glycerol in fuel cell has attracted increasing interest as power source for portable applications in recent days. These fuels are economically and environmental friendly, exhibit high volumetric energy density, facile storing and handling as compared to hydrogen fuel. Based on their feeding directly and electro-oxidation process, these are termed as direct methanol fuel cell (DMFC), direct ethanol fuel cell (DEFC), direct ethylene glycol fuel cell (DEGFC), direct formic acid fuel cell (DFAFC) and direct glycerol fuel cell (DGEFC), which are discussed in the chapter. The oxidation reaction of these fuels at low temperature in acid electrolytes is discussed in detail. The various binary and ternary Pt-based catalysts which can ease the oxidation of these liquid fuels are presented with plausible reaction mechanism. The various parameters driving the fuel cell such as catalyst loading, fuel flow rates, operating temperature and the performance in terms of current–voltage characteristics, stability and durability of the fuel cells are discussed including the recent commercial development in the field. Authors also presented their view and further work required wherever deemed fit.

Keywords

Fuel cell Direct fuel cell Renewable energy Alternative liquid fuel Electrochemistry Methanol oxidation reaction Ethanol oxidation reaction Ethylene glycoloxidation reaction Formic acid oxidation reaction Glycerol oxidation reaction Oxygen reduction reaction Direct methanol fuel cell Direct ethanol fuel cell Direct ethylene glycol fuel cell Direct formic acid fuel cell Direct glycerol fuel cell Catalyst Proton exchange membrane Anode material Cathode material Anode overpotentials Fuel cross over Power density Current-voltage characteristics 

References

  1. 1.
    Basu S (2007) Recent trends in fuel cell science and technology. Springer, New YorkCrossRefGoogle Scholar
  2. 2.
    Dillon R, Srinivasan S, Aricò AS, Antonucci V (2004) International activities in DMFC R&D: status of technologies and potential applications. J Power Sources 127:112–126.  https://doi.org/10.1016/j.jpowsour.2003.09.032CrossRefGoogle Scholar
  3. 3.
    Wasmus S, Küver A (1999) Methanol oxidation and direct methanol fuel cells: a selective review. J Electroanal Chem 461:14–31.  https://doi.org/10.1016/S0022-0728(98)00197-1CrossRefGoogle Scholar
  4. 4.
    McNicol B, Rand DA, Williams K (1999) Direct methanol–air fuel cells for road transportation. J Power Sources 83:15–31.  https://doi.org/10.1016/S0378-7753(99)00244-XCrossRefGoogle Scholar
  5. 5.
    Ogden JM, Steinbugler MM, Kreutz TG (1999) Comparison of hydrogen, methanol and gasoline as fuels for fuel cell vehicles: implications for vehicle design and infrastructure development. J Power Sources 79:143–168.  https://doi.org/10.1016/S0378-7753(99)00057-9CrossRefGoogle Scholar
  6. 6.
    Armaroli N, Balzani V (2011) The hydrogen issue. ChemSusChem 4:21–36.  https://doi.org/10.1002/cssc.201000182CrossRefPubMedGoogle Scholar
  7. 7.
    Parsons R, VanderNoot T (1988) The oxidation of small organic molecules. J Electroanal Chem Interfacial Electrochem 257:9–45CrossRefGoogle Scholar
  8. 8.
    Tiwari JN, Tiwari RN, Singh G, Kim KS (2013) Recent progress in the development of anode and cathode catalysts for direct methanol fuel cells. Nano Energy 2:553–578CrossRefGoogle Scholar
  9. 9.
    Editor G, Russell A, Shen Y et al (2008) Electrocatalysis: theory and experiment at the interface. Phys Chem Chem Phys 10:3607.  https://doi.org/10.1039/b808799gCrossRefGoogle Scholar
  10. 10.
    Han SB, Song YJ, Lee JM et al (2008) Platinum nanocube catalysts for methanol and ethanol electrooxidation. Electrochem Commun 10:1044–1047.  https://doi.org/10.1016/j.elecom.2008.04.034CrossRefGoogle Scholar
  11. 11.
    Tiwari JN, Pan F-M, Tiwari RN, Nandi S (2008) Facile synthesis of continuous Pt island networks and their electrochemical properties for methanol electrooxidation. Chem Commun 48:6516.  https://doi.org/10.1039/b813935kCrossRefGoogle Scholar
  12. 12.
    Huang K, Yang X, Hua W et al (2009) Experimental evidence of a microwave non-thermal effect in electrolyte aqueous solutions. New J Chem 33:1486.  https://doi.org/10.1039/b821970bCrossRefGoogle Scholar
  13. 13.
    Alia SM, Zhang G, Kisailus D et al (2010) Porous platinum nanotubes for oxygen reduction and methanol oxidation reactions. Adv Funct Mater 20:3742–3746.  https://doi.org/10.1002/adfm.201001035CrossRefGoogle Scholar
  14. 14.
    He Y-B, Li G-R, Wang Z-L et al (2010) Pt nanorods aggregates with enhanced electrocatalytic activity toward methanol oxidation. J Phys Chem C 114:19175–19181.  https://doi.org/10.1021/jp104991kCrossRefGoogle Scholar
  15. 15.
    Lee Y-W, Han S-B, Kim D-Y, Park K-W (2011) Monodispersed platinum nanocubes for enhanced electrocatalytic properties in alcohol electrooxidation. Chem Commun 47:6296.  https://doi.org/10.1039/c1cc10798dCrossRefGoogle Scholar
  16. 16.
    Tiwari JN, Tiwari RN, Lin K (2011) Controlled synthesis and growth of perfect platinum nanocubes using a pair of low-resistivity fastened silicon wafers and their electrocatalytic properties. Nano Res 4:541–549.  https://doi.org/10.1007/s12274-011-0110-4CrossRefGoogle Scholar
  17. 17.
    Ren X, Wilson MS, Gottesfeld S (1996) High performance direct methanol polymer electrolyte fuel cells. J Electrochem Soc 143:L12–L15.  https://doi.org/10.1149/1.1836375CrossRefGoogle Scholar
  18. 18.
    Neto AO, Dias RR, Tusi MM et al (2007) Electro-oxidation of methanol and ethanol using PtRu/C, PtSn/C and PtSnRu/C electrocatalysts prepared by an alcohol-reduction process. J Power Sources 166:87–91.  https://doi.org/10.1016/j.jpowsour.2006.12.088CrossRefGoogle Scholar
  19. 19.
    Hassan HB (2009) Electrodeposited Pt and Pt-Sn nanoparticles on Ti as anodes for direct methanol fuel cells. J Fuel Chem Technol 37:346–354.  https://doi.org/10.1016/S1872-5813(09)60024-4CrossRefGoogle Scholar
  20. 20.
    Lee S-A, Park K-W, Choi J-H et al (2002) Nanoparticle synthesis and electrocatalytic activity of Pt alloys for direct methanol fuel cells. J Electrochem Soc 149:A1299.  https://doi.org/10.1149/1.1502685CrossRefGoogle Scholar
  21. 21.
    Morante-Catacora TY, Ishikawa Y, Cabrera CR (2008) Sequential electrodeposition of Mo at Pt and PtRu methanol oxidation catalyst particles on HOPG surfaces. J Electroanal Chem 621:103–112.  https://doi.org/10.1016/j.jelechem.2008.04.029CrossRefGoogle Scholar
  22. 22.
    Huang J, Yang H, Huang Q et al (2004) Methanol oxidation on carbon-supported Pt-Os bimetallic nanoparticle electrocatalysts. J Electrochem Soc 151:A1810.  https://doi.org/10.1149/1.1804257CrossRefGoogle Scholar
  23. 23.
    Kang Y, Murray CB (2010) Synthesis and electrocatalytic properties of cubic Mn - Pt nanocrystals (nanocubes). J Am Chem Soc 132:7568–7569.  https://doi.org/10.1021/ja100705jCrossRefPubMedGoogle Scholar
  24. 24.
    Rana M, Patil PK, Chhetri M et al (2016) Pd-Pt alloys nanowires as support-less electrocatalyst with high synergistic enhancement in efficiency for methanol oxidation in acidic medium. J Colloid Interface Sci 463:99–106.  https://doi.org/10.1016/j.jcis.2015.10.042CrossRefPubMedGoogle Scholar
  25. 25.
    Wei Z, Guo H, Tang Z (1996) Methanol electro-oxidation on platinum and platinum-tin alloy catalysts dispersed on active carbon. J Power Sources 58:239–242.  https://doi.org/10.1016/S0378-7753(96)02389-0CrossRefGoogle Scholar
  26. 26.
    Wang K, Gasteiger HA, Markovic NM, Ross PN (1996) On the reaction pathway for methanol and carbon monoxide electrooxidation on Pt-Sn alloy versus Pt-Ru alloy surfaces. Electrochim Acta 41:2587–2593.  https://doi.org/10.1016/0013-4686(96)00079-5CrossRefGoogle Scholar
  27. 27.
    Ishikawa Y, Liao MS, Cabrera CR (2000) Oxidation of methanol on platinum, ruthenium and mixed Pt-M metals (M = Ru, Sn): a theoretical study. Surf Sci 463:66–80.  https://doi.org/10.1016/S0039-6028(00)00600-2CrossRefGoogle Scholar
  28. 28.
    Antolini E, Gonzalez ER (2011) Effect of synthesis method and structural characteristics of Pt-Sn fuel cell catalysts on the electro-oxidation of CH3OH and CH 3CH2OH in acid medium. Catal Today 160:28–38.  https://doi.org/10.1016/j.cattod.2010.07.018CrossRefGoogle Scholar
  29. 29.
    Habibi B, Pournaghi-Azar MH, Abdolmohammad-Zadeh H, Razmi H (2009) Electrocatalytic oxidation of methanol on mono and bimetallic composite films: Pt and Pt-M (M = Ru, Ir and Sn) nano-particles in poly(o-aminophenol). Int J Hydrog Energy 34:2880–2892.  https://doi.org/10.1016/j.ijhydene.2009.01.072CrossRefGoogle Scholar
  30. 30.
    Tritsaris GA, Rossmeisl J (2012) Methanol oxidation on model elemental and bimetallic transition metal surfaces. J Phys Chem C 116:11980–11986.  https://doi.org/10.1021/jp209506dCrossRefGoogle Scholar
  31. 31.
    Rossmeisl J, Ferrin P, Tritsaris GA et al (2012) Bifunctional anode catalysts for direct methanol fuel cells. Energy Environ Sci 5:8335.  https://doi.org/10.1039/c2ee21455eCrossRefGoogle Scholar
  32. 32.
    Chiou YJ, Hsu HJ, Lin HM et al (2011) Synthesis and characterization of Cu-Pt/MWCNTs for use in electrocatalytic applications. Particuology 9:522–527.  https://doi.org/10.1016/j.partic.2011.01.007CrossRefGoogle Scholar
  33. 33.
    Maab H, Nunes SP (2010) Modified SPEEK membranes for direct ethanol fuel cell. J Power Sources 195:4036–4042.  https://doi.org/10.1016/j.jpowsour.2010.01.005CrossRefGoogle Scholar
  34. 34.
    Abe H, Matsumoto F, Alden LR et al (2008) Electrocatalytic performance of fuel oxidation by Pt 3 Ti nanoparticles. J Am Chem Soc 130:5452–5458CrossRefPubMedGoogle Scholar
  35. 35.
    Li X, Chen G, Xie J et al (2010) An electrocatalyst for methanol oxidation in DMFC: PtBi/XC-72 with Pt solid-solution structure. J Electrochem Soc 157:B580.  https://doi.org/10.1149/1.3309725CrossRefGoogle Scholar
  36. 36.
    Ribeiro VA, Correa OV, Neto AO et al (2010) Preparation of PtRuNi/C electrocatalysts by an alcohol-reduction process for electro-oxidation of methanol. Appl Catal A Gen 372:162–166.  https://doi.org/10.1016/j.apcata.2009.10.028CrossRefGoogle Scholar
  37. 37.
    Zhen-Bo W, Peng-Jian Z, Ge-Ping Y (2009) Investigations of compositions and performance of PtRuMo/C ternary catalysts for methanol electrooxidation. Fuel Cells 9:106–113.  https://doi.org/10.1002/fuce.200800096CrossRefGoogle Scholar
  38. 38.
    Kakati N, Maiti J, Oh JY, Yoon YS (2011) Study of methanol oxidation of hydrothermally synthesized PtRuMo on multi wall carbon nanotubes. Appl Surf Sci 257:8433–8437.  https://doi.org/10.1016/j.apsusc.2011.04.125CrossRefGoogle Scholar
  39. 39.
    Yang LX, Allen RG, Scott K et al (2004) A comparative study of ptru and ptrusn thermally formed on titanium mesh for methanol electro-oxidation. J Power Sources 137:257–263.  https://doi.org/10.1016/j.jpowsour.2004.06.028CrossRefGoogle Scholar
  40. 40.
    Ioroi T, Yasuda K, Siroma Z et al (2003) Enhanced CO-tolerance of carbon-supported platinum and molybdenum oxide anode catalyst. J Electrochem Soc 150:A1225.  https://doi.org/10.1149/1.1598211CrossRefGoogle Scholar
  41. 41.
    Liao S, Holmes K-A, Tsaprailis H, Birss VI (2006) High performance PtRuIr catalysts supported on carbon nanotubes for the anodic oxidation of methanol. J Am Chem Soc 128:3504–3505.  https://doi.org/10.1021/ja0578653CrossRefPubMedGoogle Scholar
  42. 42.
    Strasser P, Fan Q,  Devenney M, Weinberg WH (2003) High Throughput Experimental and Theoretical Predictive Screening of Materials − A Comparative Study of Search Strategies for New Fuel Cell Anode Catalysts. J Phys Chem B 107:11013–11021.  https://doi.org/10.1021/jp030508zCrossRefGoogle Scholar
  43. 43.
    Zeng J, Lee JY (2007) Ruthenium-free, carbon-supported cobalt and tungsten containing binary & ternary Pt catalysts for the anodes of direct methanol fuel cells. Int J Hydrog Energy 32:4389–4396.  https://doi.org/10.1016/j.ijhydene.2007.03.012CrossRefGoogle Scholar
  44. 44.
    Welsch FG, Stöwe K, Maier WF (2011) Fluorescence-based high throughput screening for noble metal-free and platinum-poor anode catalysts for the direct methanol fuel cell. ACS Comb Sci 13:518–529.  https://doi.org/10.1021/co2000967CrossRefPubMedGoogle Scholar
  45. 45.
    Huang SY, Chang CM, Wang KW, Yeh CT (2007) Promotion of platinum-ruthenium catalyst for electrooxidation of methanol by crystalline ruthenium dioxide. ChemPhysChem 8:1774–1777.  https://doi.org/10.1002/cphc.200700238CrossRefPubMedGoogle Scholar
  46. 46.
    Umverslty H (1992) Study of methanol electrooxidation. Electrochim Acta 37:1320Google Scholar
  47. 47.
    Hirakawa K, Inoue M, Abe T (2010) Methanol oxidation on carbon-supported Pt-Ru and TiO2 (Pt-Ru/TiO2/C) electrocatalyst prepared using polygonal barrel-sputtering method. Electrochim Acta 55:5874–5880.  https://doi.org/10.1016/j.electacta.2010.05.038CrossRefGoogle Scholar
  48. 48.
    Ganesan R, Lee JS (2006) An electrocatalyst for methanol oxidation based on tungsten trioxide microspheres and platinum. J Power Sources 157:217–221.  https://doi.org/10.1016/j.jpowsour.2005.07.069CrossRefGoogle Scholar
  49. 49.
    Tseung ACC, Chen KY (1997) Hydrogen spill-over effect on Pt/WO3 anode catalysts. Catal Today 38:439–443.  https://doi.org/10.1016/S0920-5861(97)00053-9CrossRefGoogle Scholar
  50. 50.
    Huang H, Chen Q, He M et al (2013) A ternary Pt/MnO 2/graphene nanohybrid with an ultrahigh electrocatalytic activity toward methanol oxidation. J Power Sources 239:189–195CrossRefGoogle Scholar
  51. 51.
    Zhou C, Wang H, Peng F et al (2009) MnO2/CNT supported Pt and PtRu nanocatalysts for direct methanol fuel cells. Langmuir 25:7711–7717.  https://doi.org/10.1021/la900250wCrossRefPubMedGoogle Scholar
  52. 52.
    Baglio V, Sebastián D, D’Urso C et al (2014) Composite anode electrode based on iridium oxide promoter for direct methanol fuel cells. Electrochim Acta 128:304–310.  https://doi.org/10.1016/j.electacta.2013.10.141CrossRefGoogle Scholar
  53. 53.
    Baglio V, Amin RS, El-Khatib KM et al (2014) IrO2 as a promoter of Pt–Ru for methanol electro-oxidation. Phys Chem Chem Phys 16:10414.  https://doi.org/10.1039/c4cp00466cCrossRefPubMedGoogle Scholar
  54. 54.
    Katayama A (1980) Electrooxidation of methanol on a platinum-tin oxide catalyst. J Phys Chem 84:376–381.  https://doi.org/10.1021/j100441a007CrossRefGoogle Scholar
  55. 55.
    Zhao H, Zheng Z, Li J et al (2013) Substitute of expensive Pt with improved electro- catalytic performance and higher resistance to CO poisoning for methanol oxidation: the case of synergistic Pt-Co 3 O 4 nanocomposite. Nanomicro Lett 5:296–302.  https://doi.org/10.5101/nml.v5i4.p296-302CrossRefGoogle Scholar
  56. 56.
    Surampudi S, Narayanan SR, Vamos E et al (1994) Advances in direct oxidation methanol fuel cells. J Power Sources 47:377–385.  https://doi.org/10.1016/0378-7753(94)87016-0CrossRefGoogle Scholar
  57. 57.
    Shukla AK, Christensen PA, Hamnett A, Hogarth MP (1995) A vapour-feed direct-methanol fuel cell with proton-exchange membrane electrolyte. J Power Sources 55:87–91.  https://doi.org/10.1016/0378-7753(94)02150-2CrossRefGoogle Scholar
  58. 58.
    Jung DH, Lee CH, Kim CS, Shin DR (1998) Performance of a direct methanol polymer electrolyte fuel cell. J Power Sources 71:169–173.  https://doi.org/10.1016/S0378-7753(97)02793-6CrossRefGoogle Scholar
  59. 59.
    Dohle H, Schmitz H, Bewer T et al (2002) Development of a compact 500 W class direct methanol fuel cell stack. J Power Sources 106:313–322CrossRefGoogle Scholar
  60. 60.
    Kim D, Lee J, Lim TH et al (2006) Operational characteristics of a 50 W DMFC stack. J Power Sources 155:203–212.  https://doi.org/10.1016/j.jpowsour.2005.04.033CrossRefGoogle Scholar
  61. 61.
    Joh HI, Hwang SY, Cho JH et al (2008) Development and characteristics of a 400 W-class direct methanol fuel cell stack. Int J Hydrog Energy 33:7153–7162.  https://doi.org/10.1016/j.ijhydene.2008.08.016CrossRefGoogle Scholar
  62. 62.
    Wang ZB, Rivera H, Wang XP et al (2008) Catalyst failure analysis of a direct methanol fuel cell membrane electrode assembly. J Power Sources 177:386–392.  https://doi.org/10.1016/j.jpowsour.2007.11.070CrossRefGoogle Scholar
  63. 63.
    Prabhuram J, Krishnan NN, Choi B et al (2010) Long-term durability test for direct methanol fuel cell made of hydrocarbon membrane. Int J Hydrog Energy 35:6924–6933.  https://doi.org/10.1016/j.ijhydene.2010.04.025CrossRefGoogle Scholar
  64. 64.
    Patel PP, Datta MK, Jampani PH et al (2015) High performance and durable nanostructured TiN supported Pt50-Ru50 anode catalyst for direct methanol fuel cell (DMFC). J Power Sources 293:437–446.  https://doi.org/10.1016/j.jpowsour.2015.05.051CrossRefGoogle Scholar
  65. 65.
    Feng L, Li K, Chang J et al (2015) Nanostructured PtRu/C catalyst promoted by CoP as an efficient and robust anode catalyst in direct methanol fuel cells. Nano Energy 15:462–469.  https://doi.org/10.1016/j.nanoen.2015.05.007CrossRefGoogle Scholar
  66. 66.
    Jeng KT, Chien CC, Hsu NY et al (2006) Performance of direct methanol fuel cell using carbon nanotube-supported Pt-Ru anode catalyst with controlled composition. J Power Sources 160:97–104.  https://doi.org/10.1016/j.jpowsour.2006.01.057CrossRefGoogle Scholar
  67. 67.
    Chang J, Feng L, Liu C et al (2014) Ni 2 P enhances the activity and durability of Pt anode catalyst in direct methanol fuel cells. Energy Environ Sci 7:1628–1632CrossRefGoogle Scholar
  68. 68.
    Verma A, Basu S (2005) Direct use of alcohols and sodium borohydride as fuel in an alkaline fuel cell. J Power Sources 145:282–285.  https://doi.org/10.1016/j.jpowsour.2004.11.071CrossRefGoogle Scholar
  69. 69.
    Verma A, Jha AK, Basu S (2005) Evaluation of an alkaline fuel cell for multifuel system. J Fuel Cell Sci Technol 2:234.  https://doi.org/10.1115/1.2039955CrossRefGoogle Scholar
  70. 70.
    Badwal SP, Giddey S, Kulkarni A et al (2015) Direct ethanol fuel cellls for transport and stationary applications - a comprehensive review. Appl Energy 145:80–103CrossRefGoogle Scholar
  71. 71.
    Basu S, Agarwal A, Pramanik H (2008) Improvement in performance of a direct ethanol fuel cell: effect of sulfuric acid and Ni-mesh. Electrochem Commun 10:1254–1257.  https://doi.org/10.1016/j.elecom.2008.05.042CrossRefGoogle Scholar
  72. 72.
    Lai SCS, Kleijn SEF, Öztürk FTZ et al (2010) Effects of electrolyte pH and composition on the ethanol electro-oxidation reaction. Catal Today 154:92–104.  https://doi.org/10.1016/j.cattod.2010.01.060CrossRefGoogle Scholar
  73. 73.
    Verma A, Basu S (2007) Experimental evaluation and mathematical modeling of a direct alkaline fuel cell. J Power Sources 168:200–210.  https://doi.org/10.1016/j.jpowsour.2007.02.069CrossRefGoogle Scholar
  74. 74.
    James DD, Pickup PG (2010) Effects of crossover on product yields measured for direct ethanol fuel cells. Electrochim Acta 55:3824–3829.  https://doi.org/10.1016/j.electacta.2010.02.007CrossRefGoogle Scholar
  75. 75.
    Kontou S, Stergiopoulos V, Song S, Tsiakaras P (2007) Ethanol/water mixture permeation through a Nafion® based membrane electrode assembly. J Power Sources 171:1–7.  https://doi.org/10.1016/j.jpowsour.2006.10.009CrossRefGoogle Scholar
  76. 76.
    Tian Q, Chen W, Wu Y (2015) An effective PdCo/PWA-C anode catalyst for direct formic acid fuel cells. J Electrochem Soc 162:F165–F171.  https://doi.org/10.1149/2.0901501jesCrossRefGoogle Scholar
  77. 77.
    Kowal A, Li M, Shao M et al (2009) Ternary Pt/Rh/SnO2 electrocatalysts for oxidizing ethanol to CO2. Nat Mater 8:325–330.  https://doi.org/10.1038/nmat2359CrossRefPubMedGoogle Scholar
  78. 78.
    Zignani SC, Baglio V, Linares JJ et al (2013) Endurance study of a solid polymer electrolyte direct ethanol fuel cell based on a Pt-Sn anode catalyst. Int J Hydrog Energy 38:11576–11582.  https://doi.org/10.1016/j.ijhydene.2013.04.162CrossRefGoogle Scholar
  79. 79.
    Marković NM, Gasteiger HA, Ross PN Jr, Jiang X, Villegas I, Weaver MJ (1995) Electro-oxidation mechanism of methanol and formic acid on Pt-Ru alloy surfaces. Electrochim Acta 40:91–98CrossRefGoogle Scholar
  80. 80.
    Beyhan S, Coutanceau C, Léger JM et al (2013) Promising anode candidates for direct ethanol fuel cell: carbon supported PtSn-based trimetallic catalysts prepared by Bönnemann method. Int J Hydrog Energy 38:6830–6841.  https://doi.org/10.1016/j.ijhydene.2013.03.058CrossRefGoogle Scholar
  81. 81.
    Zhou W, Zhou Z, Song S et al (2003) Pt based anode catalysts for direct ethanol fuel cells. Appl Catal B Environ 46:273–285.  https://doi.org/10.1016/S0926-3373(03)00218-2CrossRefGoogle Scholar
  82. 82.
    Vigier F, Coutanceau C, Hahn F et al (2004) On the mechanism of ethanol electro-oxidation on Pt and PtSn catalysts: electrochemical and in situ IR reflectance spectroscopy studies. J Electroanal Chem 563:81–89.  https://doi.org/10.1016/j.jelechem.2003.08.019CrossRefGoogle Scholar
  83. 83.
    Vigier F, Coutanceau C, Perrard A et al (2004) Development of anode catalysts for a direct ethanol fuel cell. J Appl Electrochem 34:439–446.  https://doi.org/10.1023/B:JACH.0000016629.98535.adCrossRefGoogle Scholar
  84. 84.
    Lamy C, Rousseau S, Belgsir EM et al (2004) Recent progress in the direct ethanol fuel cell: development of new platinum-tin electrocatalysts. Electrochim Acta 49:3901–3908.  https://doi.org/10.1016/j.electacta.2004.01.078CrossRefGoogle Scholar
  85. 85.
    Jiang L, Zhou Z, Li W et al (2004) Effects of treatment in different atmosphere on Pt3Sn/C electrocatalysts for ethanol electro-oxidation. Energy Fuels 18:866–871.  https://doi.org/10.1021/ef034073qCrossRefGoogle Scholar
  86. 86.
    Jiang L, Sun G, Zhou Z et al (2004) Preparation and characterization of PtSn/C anode electrocatalysts for direct ethanol fuel cell. Catal Today 93–95:665–670.  https://doi.org/10.1016/j.cattod.2004.06.029CrossRefGoogle Scholar
  87. 87.
    Zhou WJ, Song SQ, Li WZ et al (2004) Pt-based anode catalysts for direct ethanol fuel cells. Solid State Ionics 175:797–803.  https://doi.org/10.1016/j.ssi.2004.09.055CrossRefGoogle Scholar
  88. 88.
    Jiang L, Sun G, Sun S et al (2005) Structure and chemical composition of supported Pt-Sn electrocatalysts for ethanol oxidation. Electrochim Acta 50:5384–5389.  https://doi.org/10.1016/j.electacta.2005.03.018CrossRefGoogle Scholar
  89. 89.
    Colmenares L, Wang H, Jusys Z et al (2006) Ethanol oxidation on novel, carbon supported Pt alloy catalysts-model studies under defined diffusion conditions. Electrochim Acta 52:221–233.  https://doi.org/10.1016/j.electacta.2006.04.063CrossRefGoogle Scholar
  90. 90.
    Dos Anjos DM, Kokoh KB, Léger JM et al (2006) Electrocatalytic oxidation of ethanol on Pt-Mo bimetallic electrodes in acid medium. J Appl Electrochem 36:1391–1397.  https://doi.org/10.1007/s10800-006-9222-zCrossRefGoogle Scholar
  91. 91.
    Tayal J, Rawat B, Basu S (2012) Effect of addition of rhenium to Pt-based anode catalysts in electro-oxidation of ethanol in direct ethanol PEM fuel cell. Int J Hydrog Energy 37:4597–4605.  https://doi.org/10.1016/j.ijhydene.2011.05.188CrossRefGoogle Scholar
  92. 92.
    Antolini E, Colmati F, Gonzalez ER (2007) Effect of Ru addition on the structural characteristics and the electrochemical activity for ethanol oxidation of carbon supported Pt-Sn alloy catalysts. Electrochem Commun 9:398–404.  https://doi.org/10.1016/j.elecom.2006.10.012CrossRefGoogle Scholar
  93. 93.
    Rousseau S, Coutanceau C, Lamy C, Léger JM (2006) Direct ethanol fuel cell (DEFC): electrical performances and reaction products distribution under operating conditions with different platinum-based anodes. J Power Sources 158:18–24.  https://doi.org/10.1016/j.jpowsour.2005.08.027CrossRefGoogle Scholar
  94. 94.
    Tayal J, Rawat B, Basu S (2011) Bi-metallic and tri-metallic PteSn/C, PteIr/C, PteIreSn/C catalysts for electro-oxidation of ethanol in direct ethanol fuel cell. Int J Hydrog Energy 36:14884–14897.  https://doi.org/10.1016/j.ijhydene.2011.03.035CrossRefGoogle Scholar
  95. 95.
    Ribeiro J, dos Anjos DM, Léger JM et al (2008) Effect of W on PtSn/C catalysts for ethanol electrooxidation. J Appl Electrochem 38:653–662.  https://doi.org/10.1007/s10800-008-9484-8CrossRefGoogle Scholar
  96. 96.
    Beyhan S, Léger J, Kadırgan F (2013) Pronounced synergetic effect of the nano-sized PtSnNi/C catalyst for ethanol oxidation in direct ethanol fuel cell. Appl Catal B 130–131:305–313.  https://doi.org/10.1016/j.apcatb.2012.11.007CrossRefGoogle Scholar
  97. 97.
    Goel J, Basu S (2014) Effect of support materials on the performance of direct ethanol fuel cell anode catalyst. Int J Hydrog Energy 39:15956–15966.  https://doi.org/10.1016/j.ijhydene.2014.01.203CrossRefGoogle Scholar
  98. 98.
    Liu Z, Yi X, Su X et al (2005) Preparation and characterization of Pt/C and Pt Ru/C electrocatalysts for direct ethanol fuel cells. J Power Source 149:1–7.  https://doi.org/10.1016/j.jpowsour.2005.02.009CrossRefGoogle Scholar
  99. 99.
    Mingyuan ZHU, Gongquan SUN, Huanqiao LI et al (2008) Effect of the Sn (II)/Sn (IV) redox couple on the activity of PtSn/C for ethanol electro-oxidation. Chin J Catal 29:765–770CrossRefGoogle Scholar
  100. 100.
    Zhu M, Sun G, Xin Q (2009) Effect of alloying degree in PtSn catalyst on the catalytic behavior for ethanol electro-oxidation. Electrochim Acta 54:1511–1518.  https://doi.org/10.1016/j.electacta.2008.09.035CrossRefGoogle Scholar
  101. 101.
    Goel J, Basu S (2012) Pt-Re-Sn as metal catalysts for electro-oxidation of ethanol in direct ethanol fuel cell. Energy Procedia 28:66–77.  https://doi.org/10.1016/j.egypro.2012.08.041CrossRefGoogle Scholar
  102. 102.
    Wang H, Jusys Z, Behm RJ (2009) Adsorption and electrooxidation of ethylene glycol and its C2 oxidation products on a carbon-supported Pt catalyst: a quantitative DEMS study. Electrochim Acta 54:6484–6498.  https://doi.org/10.1016/j.electacta.2009.05.097CrossRefGoogle Scholar
  103. 103.
    Pramanik H, Basu S (2010) Chemical engineering and processing: process intensification modeling and experimental validation of overpotentials of a direct ethanol fuel cell. Chem Eng Process 49:634–641.  https://doi.org/10.1016/j.cep.2009.10.015CrossRefGoogle Scholar
  104. 104.
    Goel J, Basu S (2015) Mathematical modeling and experimental validation of direct ethanol fuel cell. Int J Hydrog Energy 40:14405–14415.  https://doi.org/10.1016/j.ijhydene.2015.03.082CrossRefGoogle Scholar
  105. 105.
    Leung LWH, Weaver MJ (1988) Real-time FTIR spectroscopy as a quantitative kinetic probe of competing electrooxidation pathways of small organic molecules. J Phys Chem 92:4019–4022.  https://doi.org/10.1021/j100325a004CrossRefGoogle Scholar
  106. 106.
    De Lima RB, Paganin V, Iwasita T, Vielstich W (2003) On the electrocatalysis of ethylene glycol oxidation. Electrochim Acta 49:85–91.  https://doi.org/10.1016/j.electacta.2003.05.004CrossRefGoogle Scholar
  107. 107.
    Selvaraj V, Vinoba M, Alagar M (2008) Electrocatalytic oxidation of ethylene glycol on Pt and Pt–Ru nanoparticles modified multi-walled carbon nanotubes. J Colloid Interface Sci 322:537–544.  https://doi.org/10.1016/j.jcis.2008.02.069CrossRefPubMedGoogle Scholar
  108. 108.
    Chetty R, Scott K (2007) Catalysed titanium mesh electrodes for ethylene glycol fuel cells. J Appl Electrochem 37:1077–1084.  https://doi.org/10.1007/s10800-007-9358-5CrossRefGoogle Scholar
  109. 109.
    Neto AO, Vasconcelos TRR, Da Silva RWRV et al (2005) Electro-oxidation of ethylene glycol on PtRu/C and PtSn/C electrocatalysts prepared by alcohol-reduction process. J Appl Electrochem 35:193–198.  https://doi.org/10.1007/s10800-004-5824-5CrossRefGoogle Scholar
  110. 110.
    Livshits V, Peled E (2006) Progress in the development of a high-power, direct ethylene glycol fuel cell (DEGFC). J Power Sources 161:1187–1191.  https://doi.org/10.1016/j.jpowsour.2006.04.141CrossRefGoogle Scholar
  111. 111.
    Livshits V, Philosoph M, Peled E (2008) Direct ethylene glycol fuel-cell stack—study of oxidation intermediate products. J Power Sources 178:687–691.  https://doi.org/10.1016/j.jpowsour.2007.07.054CrossRefGoogle Scholar
  112. 112.
    Larsen R, Ha S, Zakzeski J, Masel RI (2006) Unusually active palladium-based catalysts for the electrooxidation of formic acid. J Power Sources 157:78–84.  https://doi.org/10.1016/j.jpowsour.2005.07.066CrossRefGoogle Scholar
  113. 113.
    Gojkovic SL, Popovic KD, Olszewski P et al (2005) Kinetic study of formic acid oxidation on carbon-supported platinum electrocatalyst. J Electroanal Chem 581(581):294–302.  https://doi.org/10.1016/j.jelechem.2005.05.002CrossRefGoogle Scholar
  114. 114.
    Muthukumar V, Chetty R (2017) Morphological transformation of electrodeposited Pt and its electrocatalytic activity towards direct formic acid fuel cells. J Appl Electrochem 47:735–745.  https://doi.org/10.1007/s10800-017-1076-zCrossRefGoogle Scholar
  115. 115.
    Xia XH, Iwasita T (1993) Influence of underpotential deposited lead upon the oxidation of HCOOH in HCI04 at platinum electrodes. J Electrochem Soc 140:2559–2565CrossRefGoogle Scholar
  116. 116.
    Ralph TR, Hards GA, Keating JE, Campbell SA, Wilkinson DP, Davis M, St‐Pierre J, Johnson MC (1997) Low cost electrodes for proton exchange membrane fuel cells performance in single cells and Ballard stacks. J Electrochem Soc 144:3845–3857CrossRefGoogle Scholar
  117. 117.
    Rice C, Ha S, Masel RI, Wieckowski A (2003) Catalysts for direct formic acid fuel cells. J Power Sources 115:229–235.  https://doi.org/10.1016/S0378-7753(03)00026-0CrossRefGoogle Scholar
  118. 118.
    Choi J, Jeong K, Dong Y et al (2006) Electro-oxidation of methanol and formic acid on PtRu and PtAu for direct liquid fuel cells. J Power Sources 163:71–75.  https://doi.org/10.1016/j.jpowsour.2006.02.072CrossRefGoogle Scholar
  119. 119.
    Uhm S, Lee HJ, Kwon Y, Lee J (2008) A stable and cost‐effective anode catalyst structure for formic acid fuel cells. Angew Chem Int Ed Engl 120(52):10317–10320.  https://doi.org/10.1002/ange.200803466CrossRefGoogle Scholar
  120. 120.
    Fan H, Cheng M, Wang L et al (2018) Extraordinary electrocatalytic performance for formic acid oxidation by the synergistic effect of Pt and Au on carbon black. Nano Energy 48:1–9.  https://doi.org/10.1016/j.nanoen.2018.03.018CrossRefGoogle Scholar
  121. 121.
    Muthukumar V, Chetty R (2018) Electrodeposited Pt–Pd dendrite on carbon support as anode for direct formic acid fuel cells. Ionics.  https://doi.org/10.1007/s11581-018-2526-2
  122. 122.
    Ye W, Chen S, Ye M et al (2017) Nano energy electrocatalysts for oxygen reduction reaction and formic acid oxidation. Nano Energy 39:532–538CrossRefGoogle Scholar
  123. 123.
    Mohammad AM, Al-Akraa IM, El-Deab MS (2018) Superior electrocatalysis of formic acid electro-oxidation on a platinum, gold and manganese oxide nanoparticle-based ternary catalyst. Int J Hydrog Energy 43:139–149.  https://doi.org/10.1016/j.ijhydene.2017.11.016CrossRefGoogle Scholar
  124. 124.
    Wang J, Liu Y, Okada T (2016) Novel platinum-macrocycle composite catalysts for direct formic acid fuel cells. J Appl Electrochem 46:901–905.  https://doi.org/10.1007/s10800-016-0975-8CrossRefGoogle Scholar
  125. 125.
    Yashtulov NA, Patrikeev LN, Zenchenko VO et al (2016) Palladium–platinum–porous silicon nanocatalysts for fuel cells with direct formic acid oxidation. Nanotechnol Russ 11:562–568.  https://doi.org/10.1134/S1995078016050207CrossRefGoogle Scholar
  126. 126.
    Zhang JM, Wang RX, Nong RJ et al (2017) Hydrogen co-reduction synthesis of PdPtNi alloy nanoparticles on carbon nanotubes as enhanced catalyst for formic acid electrooxidation. Int J Hydrog Energy 42:7226–7234.  https://doi.org/10.1016/j.ijhydene.2016.05.198CrossRefGoogle Scholar
  127. 127.
    El-Nagar GA, Mohammad AM, El-Deab MS, El-Anadouli BE (2017) Propitious dendritic Cu2O-Pt nanostructured anodes for direct formic acid fuel cells. ACS Appl Mater Interfaces 9:19766–19772.  https://doi.org/10.1021/acsami.7b01565CrossRefPubMedGoogle Scholar
  128. 128.
    Chang J, Feng L, Liu C et al (2014) An effective Pd–Ni 2 P/C anode catalyst for direct formic acid fuel. Angew Chem Int Ed Engl 53:122–126CrossRefPubMedGoogle Scholar
  129. 129.
    Al-akraa IM, Mohammad AM, El-deab MS, El-anadouli BE (2015) Advances in direct formic acid fuel cells: fabrication of efficient Ir/Pd nanocatalysts for formic acid electro-oxidation. Int J Electrochem Sci 10:3282–3290Google Scholar
  130. 130.
    Feng L, Chang J, Jiang K et al (2016) Nanostructured palladium catalyst poisoning depressed by cobalt phosphide in the electro-oxidation of formic acid for fuel cells. Nano Energy 30:355–361.  https://doi.org/10.1016/j.nanoen.2016.10.023CrossRefGoogle Scholar
  131. 131.
    Xu H, Yan B, Zhang K et al (2017) N-doped graphene-supported binary PdBi networks for formic acid oxidation. Appl Surf Sci 416:191–199.  https://doi.org/10.1016/j.apsusc.2017.04.160CrossRefGoogle Scholar
  132. 132.
    Zhang LY, Liu Z (2017) Graphene decorated with Pd 4 Ir nanocrystals: ultrasound-assisted synthesis, and application as a catalyst for oxidation of formic acid. J Colloid Interface Sci 505:783–788.  https://doi.org/10.1016/j.jcis.2017.06.084CrossRefPubMedGoogle Scholar
  133. 133.
    Wang S, Chang J, Xue H et al (2017) Catalytic stability study of a Pd-Ni2 P/C catalyst for formic acid electrooxidation. ChemElectroChem 4:1243–1249.  https://doi.org/10.1002/celc.201700051CrossRefGoogle Scholar
  134. 134.
    Ishiyama K, Kosaka F, Shimada I et al (2015) Deactivation resistant PdeZrO2 supported on multiwall carbon nanotubes catalyst for direct formic acid fuel cells. Int J Hydrog Energy 40:16724–16733.  https://doi.org/10.1016/j.jpowsour.2012.10.035CrossRefGoogle Scholar
  135. 135.
    Al-Akraa IM (2017) Efficient electro-oxidation of formic acid at Pd-MnOx binary nanocatalyst: optimization of deposition strategy. Int J Hydrog Energy 42:4660–4666.  https://doi.org/10.1016/j.ijhydene.2016.08.090CrossRefGoogle Scholar
  136. 136.
    Lesiak B, Mazurkiewicz M, Malolepszy A et al (2016) Effect of the Pd/MWCNTs anode catalysts preparation methods on their morphology and activity in a direct formic acid fuel cell. Appl Surf Sci 387:929–937.  https://doi.org/10.1016/j.apsusc.2016.06.152CrossRefGoogle Scholar
  137. 137.
    Jiang S, Yi B, Zhao Q et al (2017) Palladium–nickel catalysts based on ordered titanium dioxide nanorod arrays with high catalytic performance for formic acid electro-oxidation. RSC Adv 7:11719–11723.  https://doi.org/10.1039/C7RA00194KCrossRefGoogle Scholar
  138. 138.
    Zuo L-X, Jiang L-P (2017) Electrocatalysis of the oxygen reduction reaction and the formic acid oxidation reaction on BN/Pd composites prepared sonochemically. J Electrochem Soc 164:H805–H811.  https://doi.org/10.1149/2.1601712jesCrossRefGoogle Scholar
  139. 139.
    He N, Gong Y, Yang Y et al (2017) ScienceDirect an effective Pd @ Ni-B/C anode catalyst for electro- oxidation of formic acid. Int J Hydrog Energy 43:3216–3222.  https://doi.org/10.1016/j.ijhydene.2017.12.167CrossRefGoogle Scholar
  140. 140.
    Ali H, Zaman S, Majeed I et al (2017) Porous carbon/rGO composite: an ideal support material of highly efficient palladium electrocatalysts for the formic acid oxidation reaction. ChemElectroChem 4:3126–3133.  https://doi.org/10.1002/celc.201700879CrossRefGoogle Scholar
  141. 141.
    Li H, Zhang Y, Wan Q et al (2018) Expanded graphite and carbon nanotube supported palladium nanoparticles for electrocatalytic oxidation of liquid fuels. Carbon 131:111–120.  https://doi.org/10.1016/j.carbon.2018.01.093CrossRefGoogle Scholar
  142. 142.
    Casado-rivera E, Volpe DJ, Alden L et al (2004) Electrocatalytic activity of ordered intermetallic phases for fuel cell applications. J Am Chem Soc 126:4043–4049.  https://doi.org/10.1021/ja038497aCrossRefPubMedGoogle Scholar
  143. 143.
    Lee JK, Jeon H, Uhm S, Lee J (2008) Influence of underpotentially deposited Sb onto Pt anode surface on the performance of direct formic acid fuel cells. Electrochim Acta 53:6089–6092.  https://doi.org/10.1016/j.electacta.2008.02.089CrossRefGoogle Scholar
  144. 144.
    Yu X, Pickup PG (2008) Recent advances in direct formic acid fuel cells (DFAFC). J Power Source 182:124–132.  https://doi.org/10.1016/j.jpowsour.2008.03.075CrossRefGoogle Scholar
  145. 145.
    Zainoodin AM, Tsujiguchi T, Masdar MS et al (2018) Performance of a direct formic acid fuel cell fabricated by ultrasonic spraying. Int J Hydrog Energy 43:6413–6420.  https://doi.org/10.1016/j.ijhydene.2018.02.024CrossRefGoogle Scholar
  146. 146.
    Malolepszy A, Mazurkiewicz M, Stobinski L et al (2015) Deactivation resistant Pd-ZrO2 supported on multiwall carbon nanotubes catalyst for direct formic acid fuel cells. Int J Hydrog Energy 40:16724–16733.  https://doi.org/10.1016/j.ijhydene.2015.08.048CrossRefGoogle Scholar
  147. 147.
    Bai Z, Shi M, Zhang Y et al (2016) Facile synthesis of silver@carbon nanocable-supported platinum nanoparticles as high-performing electrocatalysts for glycerol oxidation in direct glycerol fuel cells. Green Chem 18:386–391.  https://doi.org/10.1039/C5GC01243KCrossRefGoogle Scholar
  148. 148.
    Fashedemi OO, Ozoemena KI (2014) Comparative electrocatalytic oxidation of ethanol, ethylene glycol and glycerol in alkaline medium at Pd-decorated FeCo@Fe/C core-shell nanocatalysts. Electrochim Acta 128:279–286.  https://doi.org/10.1016/j.electacta.2013.10.194CrossRefGoogle Scholar
  149. 149.
    Lertthahan P, Yongprapat S, Therdthianwong A, Therdthianwong S (2017) Pt-modified Au/C catalysts for direct glycerol electro-oxidation in an alkaline medium. Int J Hydrog Energy 42:9202–9209.  https://doi.org/10.1016/j.ijhydene.2016.05.120CrossRefGoogle Scholar
  150. 150.
    Li Z-Y, Zhou J, Tang L-S et al (2018) Hydroxyl-rich ceria hydrate nanoparticles enhancing the alcohol electrooxidation performance of Pt catalysts. J Mater Chem A 6:2318–2326.  https://doi.org/10.1039/C7TA09071DCrossRefGoogle Scholar
  151. 151.
    de Souza NE, Gomes JF, Tremiliosi-Filho G (2017) Reactivity of 3-carbon-atom chain alcohols on gold electrode: a comparison to understand the glycerol electro-oxidation. J Electroanal Chem 800:106–113.  https://doi.org/10.1016/j.jelechem.2016.08.019CrossRefGoogle Scholar
  152. 152.
    Gomes JF, De Paula FBC, Gasparotto LHS, Tremiliosi-Filho G (2012) The influence of the Pt crystalline surface orientation on the glycerol electro-oxidation in acidic media. Electrochim Acta 76:88–93.  https://doi.org/10.1016/j.electacta.2012.04.144CrossRefGoogle Scholar
  153. 153.
    Ishiyama K, Kosaka F, Shimada I et al (2013) Glycerol electro-oxidation on a carbon-supported platinum catalyst at intermediate temperatures. J Power Sources 225:141–149.  https://doi.org/10.1016/j.jpowsour.2012.10.035CrossRefGoogle Scholar
  154. 154.
    Fernández PS, Tereshchuk P, Angelucci CA et al (2016) How do random superficial defects influence the electro-oxidation of glycerol on Pt(111) surfaces? Phys Chem Chem Phys 18:25582–25591.  https://doi.org/10.1039/C6CP04768HCrossRefPubMedGoogle Scholar
  155. 155.
    Garcia AC, Kolb MJ, Van Nierop Y Sanchez C et al (2016) Strong impact of platinum surface structure on primary and secondary alcohol oxidation during electro-oxidation of glycerol. ACS Catal 6:4491–4500.  https://doi.org/10.1021/acscatal.6b00709CrossRefGoogle Scholar
  156. 156.
    Fernández PS, Martins CA, Martins ME, Camara GA (2013) Electrooxidation of glycerol on platinum nanoparticles: deciphering how the position of each carbon affects the oxidation pathways. Electrochim Acta 112:686–691.  https://doi.org/10.1016/j.electacta.2013.09.032CrossRefGoogle Scholar
  157. 157.
    Fernández PS, Martins ME, Martins CA, Camara GA (2012) The electro-oxidation of isotopically labeled glycerol on platinum: new information on C-C bond cleavage and CO2production. Electrochem Commun 15:14–17.  https://doi.org/10.1016/j.elecom.2011.11.013CrossRefGoogle Scholar
  158. 158.
    Martins CA, Fernández PS, Troiani HE et al (2014) Ethanol vs. glycerol: understanding the lack of correlation between the oxidation currents and the production of CO2on Pt nanoparticles. J Electroanal Chem 717–718:231–236.  https://doi.org/10.1016/j.jelechem.2014.01.027CrossRefGoogle Scholar
  159. 159.
    Martins CA, Giz MJ, Camara GA (2011) Generation of carbon dioxide from glycerol: evidences of massive production on polycrystalline platinum. Electrochim Acta 56:4549–4553.  https://doi.org/10.1016/j.electacta.2011.02.076CrossRefGoogle Scholar
  160. 160.
    Kim Y, Kim HW, Lee S et al (2017) The role of ruthenium on carbon-supported PtRu catalysts for electrocatalytic glycerol oxidation under acidic conditions. ChemCatChem 9:1683–1690.  https://doi.org/10.1002/cctc.201601325CrossRefGoogle Scholar
  161. 161.
    Silva LSR, López-Suárez FE, Perez-Cadenas M et al (2016) Synthesis and characterization of highly active Pbx@Pty/C core-shell nanoparticles toward glycerol electrooxidation. Appl Catal B Environ 198:38–48.  https://doi.org/10.1016/j.apcatb.2016.04.046CrossRefGoogle Scholar
  162. 162.
    Hasa B, Kalamaras E, Papaioannou EI et al (2015) Effect of TiO2 loading on Pt-Ru catalysts during alcohol electrooxidation. Electrochim Acta 179:578–587.  https://doi.org/10.1016/j.electacta.2015.04.104CrossRefGoogle Scholar
  163. 163.
    Gomes JF, Tremiliosi-Filho G (2011) Spectroscopic studies of the glycerol electro-oxidation on polycrystalline Au and Pt surfaces in acidic and alkaline media. Electrocatalysis 2:96–105.  https://doi.org/10.1007/s12678-011-0039-0CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Ayan Mukherjee
    • 1
  • Harikrishnan Narayanan
    • 1
  • Suddhasatwa Basu
    • 1
    • 2
  1. 1.Department of Chemical EngineeringIndian Institute of Technology DelhiNew DelhiIndia
  2. 2.CSIR-Institute of Minerals and Materials TechnologyBhubaneswarIndia

Personalised recommendations