Advertisement

Deflectometry on Curved Surfaces

  • Y. Surrel
  • F. Pierron
Conference paper
Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)

Abstract

This paper presents an application of deflectometry to measure the deformation of a thin cylindrical shell in bending. The principle of the calibration method is briefly outlined. Then, the experimental set-up is presented, followed by comparison of slopes, deflections and curvatures with results from a finite element model of the test. The results are satisfactory though limited by the quality of the reflective surface of the test samples. Future work will focus on more complex shapes to extend the technique.

Keywords

Deflectometry Full-field measurements Slopes Bending Curvatures 

Notes

Acknowledgments

The authors gratefully acknowledge funding from EPSRC, grant EP/L026910/1.

References

  1. 1.
    Zhang, Z., et al.: Three-dimensional shape measurements of specular objects using phase-measuring deflectometry. Sensors. 17(12), 2835 (2017)CrossRefGoogle Scholar
  2. 2.
    Petz, M., Ritter, R.: Reflection grating method for 3D measurement of reflecting surfaces. In: Proceedings of SPIE—The International Society for Optical Engineering (2001)Google Scholar
  3. 3.
    Ligtenberg, F.K.: A new experimental method for the determination of moments in small slab models. In: SESA. (ed.) Proceedings of SESA XII, pp. 83–98 (1954)Google Scholar
  4. 4.
    Ritter, R.: Reflection moiré methods for plate bending studies. Opt. Eng. 21(4), 663–671 (1982)MathSciNetCrossRefGoogle Scholar
  5. 5.
    Kao, T.Y., Chiang, F.P.: Family of grating techniques of slope and curvature measurements for static and dynamic flexure of plates. Opt. Eng. 21(4), 214721–214721 (1982)CrossRefGoogle Scholar
  6. 6.
    Surrel, Y., et al.: Phase-stepped deflectometry applied to shape measurement of bent plates. Exp. Mech. 39(1), 66–70 (1999)CrossRefGoogle Scholar
  7. 7.
    Devivier, C., Pierron, F., Wisnom, M.: Damage detection in composite materials using full-field slope measurements. Compos. Part A Appl. Sci. Manuf. 43(10), 1650–1666 (2012)CrossRefGoogle Scholar
  8. 8.
    Devivier, C., et al., Time-resolved full-field imaging of ultrasonic Lamb waves using deflectometry. Exp. Mech., 2016. 56(3): p. 345–357CrossRefGoogle Scholar
  9. 9.
    Periasamy, C., Tippur, H.V.: A full-field reflection-mode digital gradient sensing method for measuring orthogonal slopes and curvatures of thin structures. Meas. Sci. Technol. 24(2), (2013)CrossRefGoogle Scholar
  10. 10.
    Sciammarella, C.A., Trentadue, B., Sciammarella, F.M.: Measurement of bending stresses in shells of arbitrary shape using the reflection moire method. Exp. Mech. 40(3), 282–288 (2000)CrossRefGoogle Scholar
  11. 11.
    Bruning, J.H.: Fringe scanning interferometers. In: Optical Shop Testing. Wiley, Hoboken, NJ (1978)Google Scholar
  12. 12.
    Surrel, Y.: Phase-locked optical metrology I: identification of intrinsic camera parameters from multiple grid views. Appl. Opt. 57(1), A39–A49 (2018)CrossRefGoogle Scholar
  13. 13.
    Kammel, S., Leon, F.P.: Deflectometric measurement of specular surfaces. In: 2005 IEEE Instrumentationand Measurement Technology Conference Proceedings (2005)Google Scholar
  14. 14.
    Syed-Muhammad, K., et al.: Characterization of composite plates using the virtual fields method with optimized loading conditions. Compos. Struct. 85(1), 70–82 (2008)CrossRefGoogle Scholar
  15. 15.
    Berry, A., Robin, O., Pierron, F.: Identification of dynamic loading on a bending plate using the Virtual Fields Method. J. Sound Vib. 333(26), 7151–7164 (2014)CrossRefGoogle Scholar

Copyright information

© The Society for Experimental Mechanics, Inc. 2019

Authors and Affiliations

  1. 1.Engineering and the EnvironmentUniversity of SouthamptonSouthamptonUK
  2. 2.Yves Surrel Expertise and ConsultancySt-ÉtienneFrance

Personalised recommendations