Advertisement

DIC Image on FIB Ring-Core Analysis of Depth Sensing Residual Stress Measurement of Thin Films

  • Wen Chieh Pan
  • Ang-Ting Tsai
  • Fa-Yen Cheng
  • Terry Yuan-Fang Chen
  • Ming-Tzer Lin
Conference paper
Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)

Abstract

This work demonstrates a technique to measure the residual stress of thin films that involves a combination of focused ion beam (FIB) milling, SEM imaging and digital image correlation (DIC) analysis. Use focused ion beam (FIB) to surface milling different depth of the ring core on thin film and capture the clear images with sub-micron resolution SEM. The residual stress measurement of 1.5 μm thick silver film through PVD Sputter and E-gun deposition was discussed. By the use of digital image correlation (DIC) for full-field strain analysis and calculate the displacement-strain relationship of the silver film surface and SEM high-resolution surface deformation images. The residual stress state of the two kinds of silver films was evaluated, which indicated that FIB-DIC was well implemented to measure the residual stress.

Keywords

Focused Ion Beam (FIB) Digital Image Correlation (DIC) Residual stress Hole drilling Ring-core 

References

  1. 1.
    Bemporad, E., Brisotto, M., Depero, L.E., Gelfi, M., Korsunsky, A.M., Lunt, A.J.G., Sebastiani, M.: A critical comparison between XRD and FIB residual stress measurement techniques in thin films. Thin Solid Films. 572, 224–231 (2014)CrossRefGoogle Scholar
  2. 2.
    Massl, S., Keckes, J., Pippan, R.: A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale. Acta Mater. 55, 4835–4844 (2007)CrossRefGoogle Scholar
  3. 3.
    Kabiri, M.: Measurement of residual-stresses by the hole-drilling method-influences of transverse sensitivity of the gauges and relieved-strain coefficients. Exp. Mech. 24, 252–256 (1984)CrossRefGoogle Scholar
  4. 4.
    Schajer, G.S.: Application of finite element calculations to residual stress measurements. J. Eng. Mater. Technol. 103, 157–163 (1981)CrossRefGoogle Scholar

Copyright information

© The Society for Experimental Mechanics, Inc. 2019

Authors and Affiliations

  • Wen Chieh Pan
    • 1
  • Ang-Ting Tsai
    • 1
  • Fa-Yen Cheng
    • 2
  • Terry Yuan-Fang Chen
    • 2
  • Ming-Tzer Lin
    • 1
  1. 1.Graduate Institute of Precision EngineeringNational Chung Hsing UniversityTaichungTaiwan
  2. 2.Department of Mechanical EngineeringNational Cheng Kung UniversityTainanTaiwan

Personalised recommendations