Advertisement

Problem Formulation of Screw Feeding System of Fibrous Materials Using TRIZ

  • Marek MysiorEmail author
  • Sebastian Koziołek
  • Eugeniusz Rusiński
Chapter

Abstract

Current trends in organic waste processing are directed towards the use of new materials in thermochemical processes like torrefaction or pyrolysis. Currently known solutions on how to design a process installation are not fully applicable to the new type of materials being processed nowadays. The aim of this study was to describe set of potential problems that occur in the organic waste processing and to implement problem-solving approach using TRIZ to define potential solutions to them at the stage of conceptual design. The screw feeding system was defined as the system to be analyzed. One of the core problems defined was the blockage in material flow resulting from the morphology of the material. During the study, such TRIZ tools like Functional Analysis, 40 principles and Contradiction Matrix as well as System Operator were implemented to define the core problem and to generate solutions to this problem taking into consideration technological, economical, ecological and social aspects. The entire screw feeding system was also function-modelled and related to the entire torrefaction system showing its contribution to the process. Application of TRIZ at the stage of conceptual design makes it possible to define set of limitations in the design before the actual testing takes place. This allows to predict the behavior of the system being analyzed and thus to address the problems at earlier stage of the product development, reducing the use of resources in the design process.

References

  1. 1.
    Nordin A, Pommer L, Nordwaeger M, Olofsson I (2013) Biomass conversion through torrefaction, pp 217–244Google Scholar
  2. 2.
    Bialowiec A, Pulka J, Wisniewski D (2013) Toryfikacja i recykling organiczny odpadow. Prz Komunaln 12:36–38Google Scholar
  3. 3.
    Nachenius RW, van de Wardt TA, Ronsse F, Prins W (2015) Torrefaction of pine in a bench-scale screw conveyor reactor. Biomass Bioenergy 79:96–104CrossRefGoogle Scholar
  4. 4.
    Strandberg M, Olofsson I, Pommer L, Wiklund-Lindström S, Åberg K, Nordin A (2015) Effects of temperature and residence time on continuous torrefaction of spruce wood. Fuel Process Technol 134:387–398CrossRefGoogle Scholar
  5. 5.
  6. 6.
    Technologia zamknięcia cyklu życia odpadu kalorycznego – piroliza RDF z wytworzeniem 136 energii elektrycznej Prezentacja rozwiązania. http://www.ept.elblag.eu/attachments/article/385/3%20Dariusz%20Kami+%C3%A4ski%20Technologia%20zamkniecia%20cyklu%20zT%C3%96ycia%20odpadu%20kalorycznego%20piroliza%20RDF_bez%20filmu_final.pdf. Accessed 17 Aug 2018
  7. 7.
    Roegiers J, Pieters J, Ronsse F (2016) Heat and mass transfer modelling of auger reactors. Ghent University, GhentGoogle Scholar
  8. 8.
    Saade E, Dubljevic S (2013) Modeling of an auger reactor for biomass torrefaction. AICHE Annual Meeting, San Francisco, CA, pp 1–17Google Scholar
  9. 9.
    Kulkarni UG, Shah HP, Sanas SM, Shete AP, Kekan GH (2005) Design and development of screw press. Int J Adv Res Ideas Innov Technol 3(2):1099–1102Google Scholar
  10. 10.
    Yu Y, Arnold PC (1997) Theoretical modelling of torque requirements for single screw feeders. Powder Technol 93(2):151–162CrossRefGoogle Scholar
  11. 11.
    Nachenius RW, van de Wardt TA, Ronsse F, Prins W (2015) Residence time distributions of coarse biomass particles in a screw conveyor reactor. Fuel Process Technol 130:87–95CrossRefGoogle Scholar
  12. 12.
    Choi CH, Um B-H, Oh KK (Mar. 2013) The influence of screw configuration on the pretreatment performance of a continuous twin screw-driven reactor (CTSR). Bioresour Technol 132:49–56CrossRefGoogle Scholar
  13. 13.
    Solar J et al (2016) Influence of temperature and residence time in the pyrolysis of woody biomass waste in a continuous screw reactor. Biomass Bioenergy 95:416–423CrossRefGoogle Scholar
  14. 14.
    Ganesan V, Rosentrater KA, Muthukumarappan K (2008) Flowability and handling characteristics of bulk solids and powders - a review with implications for DDGS. Biosyst Eng 101(4):425–435CrossRefGoogle Scholar
  15. 15.
    Schwedes J (1996) Measurement of flow properties of bulk solids. Powder Technol 88(3):285–290CrossRefGoogle Scholar
  16. 16.
    Jenike AW, Elsey PJ, Wooley RH (1960) Flow properties of bulk solids. Proc Am Soc Test Mater 60:1168Google Scholar
  17. 17.
    Doassans-Carrère N, Muller S, Mitzkat M (2014) REVE — a new industrial technology for biomass torrefaction: pilot studies. Fuel Process Technol 126:155–162CrossRefGoogle Scholar
  18. 18.
    Acharya B, Sule I, Dutta A (2012) A review on advances of torrefaction technologies for biomass processing. Biomass Convers Biorefin 2(4):349–369CrossRefGoogle Scholar
  19. 19.
    Brown JN (2009) Development of a lab-scale auger reactor for biomass fast pyrolysis and process optimization using response surface methodology. Iowa State University, Ames, IACrossRefGoogle Scholar
  20. 20.
    Yu Y (1997) Theoretical modelling and experimental investigation of the performance of screw feeders. University of Wollongong, Wollongong, NSWGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  • Marek Mysior
    • 1
    Email author
  • Sebastian Koziołek
    • 1
  • Eugeniusz Rusiński
    • 1
  1. 1.Department of Machine Design and ResearchWroclaw University of Science and TechnologyWroclawPoland

Personalised recommendations