Advertisement

TRIZ Based Problem Solving of Tile Manufacturing System

  • Sebastian KoziołekEmail author
  • Mateusz Słupiński
Chapter

Abstract

This paper presents two approaches to initial problem description. First approach is constructed and used on the ad hoc basis during short meeting with an expert. Second is an upgrade to the first, constructed during study of a problem following later on after the meeting with the expert. Ad hoc approach or method is composed out of elements of TRIZ tools that are possible to be applied immediately in conversation or with a support of quick sketches on paper. Developed method extends utilization of tools introduced in ad hoc method and adds new tools to form a complete picture of problem description. Both approaches have their uses, but there are some elements from extended study, which can be introduced into ad hoc method for its improvement without endangering its necessary operability.

References

  1. 1.
    Slupinski M, Kucharavy D, Guio RD (2008) The research process for the principles of complex system description with the reference to the energy generation system, EuroMOT 2008. In: The third European conference on management of technology. HAL (open access archive), Sophia AntipolisGoogle Scholar
  2. 2.
    Salamatov Y (1999) Triz: the right solution at the right time. Insytec B.V, HattemGoogle Scholar
  3. 3.
    Altshuller G (1984) Creativity as an exact science: the theory of the solution of inventive problems. Gordon and Breach Science Publishers, AmsterdamGoogle Scholar
  4. 4.
    Altshuller G (1999) The innovation algorithm: TRIZ, systematic innovation, and technical creativity. Technical Innovation Center, Worcester, MAGoogle Scholar
  5. 5.
    Kucharavy D, Guio RD (2008) Technological forecasting and assessment of barriers for emerging technologies. IAMOT, Dubai, p 20Google Scholar
  6. 6.
    Khomenko N, De Guio R, Lelait L, Kaikov I (2007) A framework for OTSM-TRIZ based computer support to be used in complex problem management. Int J Comput Appl Technol 30(1/2):88–104CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  1. 1.Department of Machine Design and ResearchWroclaw University of Science and TechnologyWroclawPoland
  2. 2.Centre for Systems Solutions, CRSPoznańPoland

Personalised recommendations