Advertisement

Mobile Biogas Station Design: The TRIZ Approach

  • Mariusz Ptak
  • Sebastian Koziołek
  • Damian Derlukiewicz
  • Marek MysiorEmail author
  • Mateusz Słupiński
Chapter

Abstract

The aim of this paper is to carry out the process of applying TRIZ in the mobile biogas station by using its tools and techniques. The design system was chosen as the field in which TRIZ has been approached. The TRIZ method was introduced and its unique capability to solve problems was presented. To adopt TRIZ methodology to achieve the objective the deep understanding of the system and the identification of the problem was needed. Therefore, this paper presents the mobile biogas station and compares it with the current needs of the market. The research stage was carried out by the systematic following the steps outlined by the Oxford Creativity handbook. Some TRIZ tools were used to overcome psychological inertia and pessimistic people influence encountered especially at the beginning of the work. Finally, the undertaken techniques enabled a feasible and novel mobile station to be designed. The concepts were developed and detailed computer-aided models were completed. They were also analyzed and evaluated by finite element method in terms of undergone structural stress.

Notes

Acknowledgements

The article was developed as part of project LIDER/034/645/L-4/12/NCBR/2013 funded by the National Centre for Research and Development.

References

  1. 1.
    Deublein D, Steinhauser A (2011) Biogas from waste and renewable resources: an introduction. Wiley, HobokenGoogle Scholar
  2. 2.
    Kupczyk A, Prządka A, Różnicka I (2009) Wybrane problemy produkcji i wykorzystania biogazu. Energetyka:552–556Google Scholar
  3. 3.
    Derlukiewicz D, Ptak M (2015) Conceptual design of means of transport harnessing human power. New Contrib Inf Syst Technol:365–373Google Scholar
  4. 4.
    Koziołek S, Derlukiewicz D, Ptak M (2010) Design process innovation of mechanical objects with the use of design for six sigma methodology. Solid State Phenom 165:274–279CrossRefGoogle Scholar
  5. 5.
    Koziołek S, Ptak M, Słupiński M (2012) Manufacturing problem solving using TRIZ and DFSS module. Syst J Transdiscipl Syst Sci 16:17–23Google Scholar
  6. 6.
    Gadd K (2011) TRIZ for engineers: enabling inventive problem solving. Wiley, ChichesterCrossRefGoogle Scholar
  7. 7.
    Altshuller G (1996) And suddenly the inventor appeared: TRIZ, the theory of inventive problem solving. Technical Innovation Center, Worcester, MAGoogle Scholar
  8. 8.
    Boratyński J (2007) Co to jest TRIZ?Google Scholar
  9. 9.
    Youmans R, Arciszewski T (2012) Design fixation: a cloak of many colors. Des Comput Cogn:114–129Google Scholar
  10. 10.
    Valverde U, Nadeau J, Scaravetti D, Leon J (2014) Innovation through pertinent patents research based on physical phenomena involved. Procedia CIRP 21:515–520CrossRefGoogle Scholar
  11. 11.
    Kim S-H, Jang K-J (2002) Designing performance analysis and IDEF0 for enterprise modelling in BPR. Int J Prod Econ 76:121–133CrossRefGoogle Scholar
  12. 12.
    Karliński J, Ptak M, Działak P, Rusiński E (2016) The approach to mining safety improvement: accident analysis of an underground machine operator. Arch Civ Mech Eng 16:503–512CrossRefGoogle Scholar
  13. 13.
    Ptak M, Konarzewski K (2015) Numerical technologies for vulnerable road user safety enhancement. Adv Intell Syst Comput 354:355–364CrossRefGoogle Scholar
  14. 14.
    Karliński J, Ptak M, Działak P, Rusiński E (2014) Strength analysis of bus superstructure according to regulation no. 66 of UN/ECE. Arch Civ Mech Eng 14:342–353CrossRefGoogle Scholar
  15. 15.
    Derlukiewicz D, Ptak M, Koziołek S (2016) Proactive failure prevention by human-machine interface in remote-controlled demolition robots. Advances in intelligent systems and computing. Springer, Cham, pp 711–720Google Scholar
  16. 16.
    Rusiński E, Moczko P, Odyjas P, Pietrusiak D (2014) Investigation of vibrations of a main centrifugal fan used in mine ventilation. Arch Civ Mech Eng 14:569–579CrossRefGoogle Scholar
  17. 17.
    Górniak A, Kaźmierczak A, Włostowski R, Ptak M (2015) Pressure waves influence on performance of a pyrotechnically driven device. J KONES Powertrain Transp 22:21–27Google Scholar
  18. 18.
    Ariatapeh M, Mashayekhi M (2014) Prediction of all-steel CNG cylinder fracture under impact using a damage mechanics approach. Iran Trans B, Mech Eng 21(3):609Google Scholar
  19. 19.
    Chybowski L, Żółkiewski S (2015) Basic reliability structures of complex technical systems. New Contrib Inf Syst Technol:333–342Google Scholar
  20. 20.
    Fahy M, Tiernan S (2001) Finite element analysis of ISO tank containers. J Mater Process Technol 119(1–3):293–298CrossRefGoogle Scholar
  21. 21.
    Tiernan S, Fahy M (2002) Dynamic FEA modelling of ISO tank containers. J Mater Process Technol 124(1–2):126–132CrossRefGoogle Scholar
  22. 22.
    ADR: (2013) Umowa europejska dotycząca międzynarodowego przewozu drogowego towarów niebezpiecznychGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  • Mariusz Ptak
    • 1
  • Sebastian Koziołek
    • 1
  • Damian Derlukiewicz
    • 1
  • Marek Mysior
    • 1
    Email author
  • Mateusz Słupiński
    • 1
  1. 1.Department of Machine Design and ResearchWroclaw University of Science and TechnologyWroclawPoland

Personalised recommendations