Advertisement

Semigraphical Method of Motor Oils Thermal-Oxidative Stability Index Control

  • B. I. Kowalsky
  • V. G. Shram
  • A. V. Lysyannikov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

At present, it is impossible to establish the effect of temperature on the aging processes of motor oils, base oil base, and additives without experimental studies. In this article, the research methodology and experimental results of thermooxidation stability indicators including the optical density, volatility and thermal oxidation coefficient of Texaco Extra 10W-40 SL/CF motor oil are presented. The thermal and oxidation stability of the oil under investigation was determined from the change in optical density and evaporation. An analytical relationship between the thermooxidation stability and the test temperature was established, on the basis of which a graphoanalytical model for predicting these parameters at other test temperatures was proposed. The use of this method of research is aimed at determining such performance indicators for the quality of motor oils as the temperature of the beginning of the processes of transformation in oil and the critical temperature of these processes, which determine the temperature range of its efficiency. The proposed performance indicators will allow one to compare lubricants and identify them for compliance with the groups of operational properties.

Keywords

Transmission density Volatility Thermal-oxidative stability index Semigraphical projection model of thermal-oxidative stability index 

References

  1. 1.
    Kowalski BI, Derevyagina LN, Kirichenko IA (1969) Method for determining intensity of oxidation processes of lubricating oils. Patent RF 2057326, MKI G01N33/30Google Scholar
  2. 2.
    GOST 20457-75 Motor oils. Method of test for antioxidizing properties by installation IKMGoogle Scholar
  3. 3.
    GOST 18136-72 Oils. Method for determination of oxidation stability in a universal apparatusGoogle Scholar
  4. 4.
    Kondakov AA (1982) Power fluids and seals of hydraulic systems. In: Mechanical Engineering, Moscow, 216 pGoogle Scholar
  5. 5.
    Ahmatov A (1963) Molecular physics of boundary friction. Gos. ed of Sci. Lite-ture, Moscow, 472 pGoogle Scholar
  6. 6.
    Vinogradov GV (1969) Previous studies EP lubricating properties of hydrocarbon fluids. In: Methods of assessing the extreme pressure and anti-wear properties of lubricating mate-rials. Nauka, Moscow, pp 3–11Google Scholar
  7. 7.
    Kowalski BI, Petrov ON, Shram VG, Bezborodov YuN, Sokolnikov AN (2015) Photometric method for controlling oxidation of synthetic motor oils. News Tula State Univ Tech Sci 7–2:169–184Google Scholar
  8. 8.
    Matveevsky RM (1971) Temperature resistance boundary lubricant layers and Tver gut-lubricating coatings in friction of metals and alloys. Izdatelstvovo “Science”, Moscow, 228 pGoogle Scholar
  9. 9.
    Maharramov AM, Akhmedova RA, Akhmedova NF (2009) Petrochemicals and neftepererabot-ka. Textbook for higher educational institutions. Baku University, Baku, 660 pGoogle Scholar
  10. 10.
    Kowalski BI, Vereshchagin VI, Shram VG, Runda MM (2013) Processes occurring on the frictional contact with the tribological tests running motor oils. Control Diagn 13:172–177Google Scholar
  11. 11.
    Kowalski BI, Vereshchagin VI, Shram VG, Runda MM (2014) Processes occurring in the lubricating oil during incubation, and their effect on the anti-wear properties. News Tula State Univ Tech Sci 7:226–232Google Scholar
  12. 12.
    Studt P (1989) Boundary lubrication: adsorption of oil additives on steel and ceramic surfaces and its influence on friction and wear. Tribol Int 22(2):111–119CrossRefGoogle Scholar
  13. 13.
    Tabor D (1968) Solid friction, boundary lubrication and wear. In: Conference on lubrication and wear. Fundamentals and application to design. Proceedings of the institution of mechanical engineers, vol 182, Sess. 4, 262 pGoogle Scholar
  14. 14.
    Hopkins V, Wilson R (1964) Transition temperatures in the four-ball wear tester. Lubricat Eng 8, 305 pGoogle Scholar
  15. 15.
    Blok H (1937) Theoretical study of temperature at surfaces of actual contact under oiliness lubricating conditions. In: Proceedings of General Discuss on Lubrication and Lubricants. Institution of Mechanical Engineers, London, 22 pGoogle Scholar
  16. 16.
    Fein R (1964) Effect of lubricants on transition temperatures. In: International conference on lubrication, WashingtonGoogle Scholar
  17. 17.
    Askwith T, Cameron A, Crouch R (1964) The relationship of molecular chain length of lubricant and theory of scuffing. In: Conference on Institute of Petroleum Gear Lubrication, 37 pGoogle Scholar
  18. 18.
    Kowalski BI, Shram VG, Petrov ON, Khimich GN (2015) Evaluation of the bearing capacity of the lubricant boundary layer at a sliding friction. Bull Irkutsk State Tech Univ 10:173–178Google Scholar
  19. 19.
    Petrov ON, Shram VG, Kowalski BI, Sokolnikov AN (2015) A method for improving the lubricity of motor oils. J Mech Eng 4:37–39Google Scholar
  20. 20.
    Kovalsky BI (2005) Methods and means of increasing the efficiency of the use of lubricants. Novosibirsk: Science, 341 pGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • B. I. Kowalsky
    • 1
  • V. G. Shram
    • 1
  • A. V. Lysyannikov
    • 1
  1. 1.Siberian Federal UniversityKrasnoyarskRussia

Personalised recommendations