Advertisement

Qualitative Research of Combined Friction in Contact of Elastic Wheel with Solid Surface

  • E. V. Balakina
  • D. S. Sarbaev
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

This article describes the results of an experimental research of combined friction in the contact of an elastic wheel with a solid surface for the purpose of qualitatively determining the relative location of the areas with static friction and sliding friction relative to the linear velocity vector of the wheel. The experiment was carried out on a special installation with a glassy support surface, using video equipment to record the results. The conclusions are drawn about the qualitative arrangement of areas with static friction and sliding friction in the contact relative to the linear velocity vector of the wheel. The conducted research showed that, when modeling the rotation of a wheeled vehicle, the areas with the static friction are displaced aside, opposite to the direction of the lateral force, and when modeling the braking—in the direction opposite to the direction of speed of a sliding wheel. A further study of combined friction in the contact and the development of the methods for their investigation will correctly simulate the stability and controllability of the wheeled vehicle under various modes of its motion. Also, the results of the paper can be useful in developing new algorithms for the functioning of drive control systems of wheeled vehicles.

Keywords

Elastic wheel Solid surface Contact patch Combined friction Friction areas Static friction Sliding friction Relative location 

References

  1. 1.
    Automotive handbook: 2nd edn, updated and revised (2004) (trans: Dugin GS, Komarov EI, Onufriychuk YV). Za rulem, MoscowGoogle Scholar
  2. 2.
    Balabin IV et al (2012) Automobile and tractor wheels and tires. MGTU MAMI, MoscowGoogle Scholar
  3. 3.
    Balakina EV and Zotov NM (2015) Determination of the mutual arrangement of forces, reactions, and friction zones in the contact zone of an elastic wheel with a solid surface. J Frict Wear 36(1):29–32 Allerton Press IncCrossRefGoogle Scholar
  4. 4.
    Balakina EV (2017) Calculation of the geometric position and the sizes of the static friction and sliding friction zones at the point of contact between an elastic wheel and a firm surface. J Frict Wear 38(2):144–149 Allerton Press IncCrossRefGoogle Scholar
  5. 5.
    Balakina EV, Zotov NM (2011) Stable motion of wheeled vehicles. RPK Politekhnik, Volgograd, p 464Google Scholar
  6. 6.
    Kireyenkov AA (2002) On the uniform movement of rotary disk along plain surface with combined friction. Izv RAN MTT 1:60–67Google Scholar
  7. 7.
    Knoroz VI et al (1976) Operation of automobile tires. Transport, Moscow, p 240Google Scholar
  8. 8.
    Kravets VN, Selifonov VV (2011) Automobile theory. College textbook. OOO Greenlight, Moscow, p 884Google Scholar
  9. 9.
    Petrushov VA (2008) Automobiles and road trains: new technologies of research of rolling and wind resistance. Torus Press, Moscow, p 352Google Scholar
  10. 10.
    Stankevich EB and Azarov BM (1971) Study of traction and skidding areas in tire contact with support surface. Trudy NAMI, No. 212. Study of undercarriage of wheeled tractors. Publ. NAMI, Moscow, pp 31–34Google Scholar
  11. 11.
    Turenko AN et al (2010) Calculation of realized traction coefficient at wheel floating in braking mode. Automobile Transp 27:7–12Google Scholar
  12. 12.
    Fedotov AI (2015) Dynamic method of diagnostics of pneumatic brake drives of motor vehicles. Monograph. Publ. IrNITU, Irkutsk, p 514Google Scholar
  13. 13.
    Besselink IJM et al (2007) Tyre models for steady-state vehicle handling analysis. ing. R. T. Uil DCT, Eindhoven, p 142Google Scholar
  14. 14.
    Pacejka Hans B (2012) Tire and vehicle dynamics. Elsevier, USAGoogle Scholar
  15. 15.
    Morris de Beer et al (2012) Tyre-pavement interface contact stresses on flexible pavements—quo vadis? In: 8th conference on asphalt pavements for southern Africa, June 2012Google Scholar
  16. 16.
    Liukkula M (2006) Tyre characterisation on summer and winter surfaces. Presentation in tire technology expo 2006, 3rd international colloquium on vehicle-tyre-road interaction. Nokian TyresGoogle Scholar
  17. 17.
    Jazar Reza N (2008) Vehicle dynamics: theory and application. Springer Science + Business Media, LLC, London, p 1015CrossRefGoogle Scholar
  18. 18.
    Sami Koskinen (2010) Sensor data fusion based estimation of tyre-road friction to enhance collision avoidance. A dissertation for the degree of Doctor of Science in Technology of the Faculty Automation, Mechanical and Materials Engineering, the Tampere University of Technology, 12 Mar 2010, p 209Google Scholar
  19. 19.
    Jakob Svendenius (2007) Tire modeling and friction estimation. Department of Automatic Control, Lund University, Lund, Sweden, p 194Google Scholar
  20. 20.
    Zotov NM, Balakina EV (2007) Using the nomogram in calculating the dynamics of a braked wheel. J Mach Manuf Reliabil 36(2):193–198CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Volgograd State Technical UniversityVolgogradRussia

Personalised recommendations