Advertisement

Optimization of Parameters for Fuel Combustion Process of Diesel Working Cycle Improvement

  • E. A. Lazarev
  • V. E. Lazarev
  • M. A. Matsulevich
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Energy and environmental indicators are two basic criteria to assess technological specification of the internal combustion engine and the perfection of the working cycle in particular. These criteria are controversial; however, they are considerably determined by the quality of the combustion process. In this connection, it is reasonable to improve the working cycle by optimizing the output parameters of the fuel combustion process. The article considers methods for the optimization of the combustion process in diesel engines. The estimation of the specific and the formation of complex criteria, objective function; admissible domain and neighborhoods of the change in the output parameters of the combustion process are given. The numerical values of conventional boundaries separating regions with low, average, and high degrees of control of the combustion process are determined.

Keywords

Diesel engine Working cycle Combustion process Optimization Specific and complex criteria 

References

  1. 1.
    Vibe II (1970) Brennverlauf und Kreisprozeß von Verbrennungsmotoren. VEB Verlag Technik, BerlinGoogle Scholar
  2. 2.
    Charomskii AD (1934) Testing, research and calculation of diesel aircraft engine. ONTI, MoscowGoogle Scholar
  3. 3.
    Voinov AN (1977) Combustion in high-speed reciprocating motors. In: Mashinostroenie (Mechanic Engineering), MoscowGoogle Scholar
  4. 4.
    Lyn WT (1966) Einige Probleme der Verbrennung in Diesel–motoren. MTZ 4Google Scholar
  5. 5.
    Razleytsev NF (1980) Design and optimization of the combustion process in diesel engines. Visha shkola, KharkovGoogle Scholar
  6. 6.
    Hiroyasu H, Kadota T (1976) Models for combustion and formation of nitric oxide and soot in DI Diesel Engines. SAE 760129Google Scholar
  7. 7.
    Kuleshov AS (2006) Use of multi-zone DI diesel spray combustion model for simulation and optimization of performance and emissions of engines with multiple injection. SAE Paper No. 1006-01-1385Google Scholar
  8. 8.
    Tatschl R, Berg EV, Bogensperger M, Kuensberg ChV, Priesching P (2002) CFD in IC-Engine spray and combustion simulation-current status and future development. In: Fifth world congress on computational mechanics, Vienna, pp 13–16Google Scholar
  9. 9.
    Ivashenko NA, Kuleshov AS (2009) Mathematic modeling of the processes in internal combustion engines. In: MNTK turbocharging of automobile and tractor engines, Protvino, pp 5–8Google Scholar
  10. 10.
    Khailov MA (1960) Combustion phases. In: Combustion and carburetion in diesel engines. Akademia nauk SSSR, MoscowGoogle Scholar
  11. 11.
    Lazarev EA (2010) Basic principles, methods and efficiency of improving the combustion process to increase the technical level of tractor diesel engines: monograph. SUSU Publishing Center, ChelyabinskGoogle Scholar
  12. 12.
    Grekhov LV (2004) Fuel injection equipment and the systems of control of diesel engines. Legion-Avtodata, MoscowGoogle Scholar
  13. 13.
    Norenkov IP (2002) Fundamentals of automatic design, 2nd edn. Publishing Center Bauman MSTU, MoscowGoogle Scholar
  14. 14.
    Lazarev EA, Arav BL (1974) Effect of the type of differential characteristic of fuel burn-up on the parameters of the working cycle of diesel engine. In: Problems of Design and Research of Tractors and Tractor Engines, pp 200–211Google Scholar
  15. 15.
    Lange K (1969) Berechnung von Druckverlauf und Wirkungsgrad im Verbrennungsmotor. MTZ 30:173–176Google Scholar
  16. 16.
    Zvonov VA (1981) Toxicity of internal combustion engines. Mashinostroenie (Mechanic Engineering), MoscowGoogle Scholar
  17. 17.
    GOST R 41.96 (2005) State StandardGoogle Scholar
  18. 18.
    Malozemov AA (2015) Development of software for calculation and optimization of diesel operating processes and fuel supply. Proc Eng 129:724–730CrossRefGoogle Scholar
  19. 19.
    Mamin BV, Zaitsev LК, Egorov VV (1972) Results of research of the working cycle of the tractor diesel high span engine with film carburetion. In: Automobiles, Tractors and Engines, pp 108–115Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • E. A. Lazarev
    • 1
  • V. E. Lazarev
    • 1
  • M. A. Matsulevich
    • 1
  1. 1.South Ural State UniversityChelyabinskRussia

Personalised recommendations