Advertisement

Common Problems and Prospects of Crankshaft (Eccentric) Machinery Usage in Sawmilling

  • A. A. Kondratyuk
  • V. K. Shilko
  • A. A. Klopotov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The article draws attention to the evolution and applying of crankshafts sawing machines with a rotary-translational motion cutting. We analyzed the kinematics of the cutting tool. The comparative analysis of cutting modes and productivity of crankshafts sawing machines are given. The problems associated with the removal of chips from the cutting zone are analyzed. It is proposed for the crankshafts sawing machines to spread a group of saws along two planes. According to the developers of crankshaft sawing machines with rotational–translational motion of the tool, these machines should replace gang saws of the second row, as well as circular and band re-saw machines. However, comparative performance analysis of the crankshaft sawing machines showed that they are unable to compete against gang saws, not to mention the multi-blade circular re-saw machines. Thus, it is clearly seen that today crankshaft sawing machines with rotational–translational movement of cutting have a number of the unresolved technical problems and do not have technological advantages over existing types of the sawmill equipment.

Keywords

Eccentric machinery Bandmills Gang saws Circular saw benches 

Notes

Acknowledgements

The research is carried out at Tomsk Polytechnic University within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant, Project Number TPU CEP_IHTP_73\2017.

References

  1. 1.
    Prokopov VS (2011) Study of the dynamic behaviour of multi-rip bench with circular translational motion of wood-cutting blades. Izv Vuzov Mashinostrojenie 1:14–17Google Scholar
  2. 2.
    Blohin MA, Prokopov VS, Karpakov AS (2013) Study, calculation, and construction of a milling module on machines with circular translational motion of the cutting instrument. Constr Road Build Machin 9:20–27Google Scholar
  3. 3.
    Gavryushin SS, Prokopov VS, Blohin MA (2012) Development of the technique for the numerical dynamical analysis characteristics of a multisaw machine with circular translational motion of wood-cutting blades. Her Bauman Mosc State Tech Univ ME 4:108–120Google Scholar
  4. 4.
    Shilko VK, Kondratyuk AA, Tokareva OF (2012) In: Proceedings of international conference on the prospects development of the science and education, vol. 1, Tambov, 28 Sept, pp 145–149. Publishing House TROO “Business-Science-Society”Google Scholar
  5. 5.
    Shilko VK (2005) Cutting mechanisms of band saw machines. TSUAB Press, Tomsk, p 220Google Scholar
  6. 6.
    Kondratyuk AA, Shilko VK, Rudnev VD (2004) Estimation of band mill traction performance. In: 8th Korea-Russia international symposium on science and technology, KORUS 2004, Tomsk, pp 24–27Google Scholar
  7. 7.
    Shilko VK, Vilipp EM, Tokareva OF (2004) Use of the friction of relative rest in cutting mechanisms of belt sawing machines. In: Proceedings of international conference on the theory and practical prospects development of the science and education, pp 154–159Google Scholar
  8. 8.
    Shilko VK (2004) Use of the friction of relative rest in cutting mechanisms of belt sawing machines. Frict Wear 25(5):512–518Google Scholar
  9. 9.
    Shilko VK, Kondratyuk AA, Doronin DA (2014) The efficiency of wood cutting with single blade circular saw machines. In: Proceedings of international conference on the prospects development of the science and education, pp 165–169Google Scholar
  10. 10.
    Shilko VK, Slepchenko VA, Slepchenko IV (2017) Problems and prospects of crankshaft (eccentric) machinery usage in sawmilling. Actual Probl Timber Complex 48:97–103Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • A. A. Kondratyuk
    • 1
  • V. K. Shilko
    • 2
  • A. A. Klopotov
    • 2
    • 3
  1. 1.National Research Tomsk Polytechnic UniversityTomskRussia
  2. 2.Tomsk State University of Architecture and BuildingTomskRussia
  3. 3.National Research Tomsk State UniversityTomskRussia

Personalised recommendations