Advertisement

Experimental and Numerical Investigation of Influence of Hydrogen Addition to Hydrocarbon Fuel on Wankel Rotary Engine Performance

  • E. M. Itkis
  • E. A. Fedyanov
  • Y. V. Levin
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Recently, hydrogen has been considered as an alternative for conventional fuels which is used for a transportation sector. The Wankel rotary engine is more adaptable for running on hydrogen fuels than traditional reciprocating engines possessing lower preignition and backfire probability. Experimental and numerical data are presented for the Wankel rotary engine performance on hydrogen blends with hydrocarbon fuel. For the experimental study of the hydrogen addition effect on the engine performance, the Wankel engine test bench VAZ-311 (Russia) was used. The hydrogen and gasoline supply were carried out by injectors mounted in the Wankel rotary engine inlet manifold. The experiments showed that a 5% hydrogen mass fraction in the fuel mixture increases peak pressure in the Wankel rotary engine combustion chamber for partial loads. For the theoretical study, a numerical model of the flame propagation in the Wankel rotary engine combustion chamber was developed. Numerical research revealed the possibility of a complete air–fuel mixture combustion due to hydrogen addition for a number of operating conditions.

Keywords

Wankel engine Hydrogen Gasoline Flame propagation Combustion 

References

  1. 1.
    Chen H et al (2015) Development of rotary piston engine worldwide. In: AASRI international conference on industrial electronics and applications.  https://doi.org/10.2495/feem140201
  2. 2.
    Thompson GJ, Wowczuk ZS, Smith JE (2003) Rotary engines—a concept review. SAE Technical Paper.  https://doi.org/10.4271/2003-01-3206
  3. 3.
    Boretti A (2015) Modeling unmanned aerial vehicle jet ignition Wankel engines with CAE/CFD. Adv Aircr Spacecr Sci.  https://doi.org/10.12989/aas.2015.2.4.445CrossRefGoogle Scholar
  4. 4.
    Amrouche F et al (2014) An experimental investigation of hydrogen-enriched gasoline in a Wankel rotary engine. Int J Hydrog Energy.  https://doi.org/10.1016/j.ijhydene.2014.03.172CrossRefGoogle Scholar
  5. 5.
    Buchling J (2003) The new Mazda RX-8. ATZ Automob Z 105(9):760–761Google Scholar
  6. 6.
    Ohkubo M, Tashima S, Shimizu R, Fuse S, Ebino H (2004) Developed technologies of the new rotary engine (RENESIS). SAE Technical Paper.  https://doi.org/10.4271/2004-01-1790
  7. 7.
    Wakayama N et al (2006) Development of hydrogen rotary engine vehicle. In: 16th world hydrogen energy conference, Lyon, France, 2006Google Scholar
  8. 8.
    Heller DA (2005) International strategic alliances and technology strategy: the case of rotary-engine development at Mazda. Diss. Shinshu University Library 52:31–56Google Scholar
  9. 9.
    Wang S, Ji C, Zhang B (2010) Effects of hydrogen addition and cylinder cutoff on combustion and emissions performance of a spark-ignited gasoline engine under a low operating condition. J Energy.  https://doi.org/10.1016/j.energy.2010.09.01535CrossRefGoogle Scholar
  10. 10.
    Shivaprasad KV et al (2014) Experimental investigation of the effect of hydrogen addition on combustion performance and emissions characteristics of a spark ignition high speed gasoline engine. J Proc Technol.  https://doi.org/10.1016/j.protcy.2014.08.019CrossRefGoogle Scholar
  11. 11.
    Su T et al (2017) Investigation on performance of a hydrogen-gasoline rotary engine at part load and lean conditions. J Appl Energy.  https://doi.org/10.1016/j.apenergy.2017.08.049CrossRefGoogle Scholar
  12. 12.
    Zambalov SD, Yakovlev IA, Skripnyak VA (2017) Numerical simulation of hydrogen combustion process in rotary engine with laser ignition system. Int J Hydrog Energy.  https://doi.org/10.1016/j.ijhydene.2017.05.142CrossRefGoogle Scholar
  13. 13.
    Verhelst S, Wallner T (2009) Hydrogen-fueled internal combustion engines. J Progress Energy Combust Sci.  https://doi.org/10.1016/j.pecs.2009.08.001CrossRefGoogle Scholar
  14. 14.
    Cipriani G et al (2014) Perspective on hydrogen energy carrier and its automotive applications. Int J Hydrog Energy.  https://doi.org/10.1016/j.ijhydene.2014.03.174CrossRefGoogle Scholar
  15. 15.
    Basile A, Iulianelli A (2014) Advances in hydrogen production, storage and distribution. ElsevierGoogle Scholar
  16. 16.
    Fedyanov EA et al (2017) Modelling of flame propagation in the gasoline fuelled Wankel rotary engine with hydrogen additives. In: IOP conference series: materials science and engineering.  https://doi.org/10.1088/1757-899x/177/1/012076CrossRefGoogle Scholar
  17. 17.
    Danieli GA, Keck JC, Heywood JB (1978) Experimental and theoretical analysis of Wankel engine performance. SAE Technical Paper.  https://doi.org/10.4271/780416
  18. 18.
    Blizard N, Keck JC (1974) Experimental and theoretical investigation of turbulent burning model for internal combustion engines. SAE Technical Paper.  https://doi.org/10.4271/740191
  19. 19.
    Peters N (2000) Turbulent combustion. Cambridge University Press, Cambridge.  https://doi.org/10.1017/CBO9780511612701CrossRefzbMATHGoogle Scholar
  20. 20.
    Gelfand BE et al (2012) Thermo-gas dynamics of hydrogen combustion and explosion. Springer Science & Business Media, Berlin.  https://doi.org/10.1007/978-3-642-25352-2CrossRefGoogle Scholar
  21. 21.
    Glassman I, Yetter RA, Glumac NG (2014) Combustion. Academic PressGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Volgograd State Technical UniversityVolgogradRussia

Personalised recommendations