Advertisement

Study on Tribological Characteristics of High Entropy High-Speed Steels in Conditions of Dry Friction on Structural Steel

  • A. A. Ryzhkin
  • E. V. Fominoff
  • C. G. Shuchev
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The connection between the entropy of HSS grades and their frictional properties and elastic strength characteristics of surface layers at the microlevel was experimentally confirmed. It was established that the best friction characteristics are connected with a high level of entropy, which apparently can be explained by the peculiarities of forming the third body (build-up layer) and its composition. The growth process of the third body for high entropy HSS flows with a greater speed than its destruction, and the obtained thickness of the third body contributes to the alienation of friction surfaces reducing the strength of adhesive joints and the coefficient of friction. These properties become apparent under conditions when the value of thermomechanical activating effects in the friction zone is of an adequate level. It was established that build-up layers on specimens of high entropy HSS have a greater stability due to their high hardness and low elasticity of surface layers. The authors proposed the process of build-up layer formation during friction for HSS having various entropy levels characterized in the first approximation by the two quantitative indicators: the maximum possible value of build-up layer thickness under specified conditions and the relative rate of build-up layer formation versus destruction. It was assumed that the calculation of entropy values as structurally sensitive characteristics of the tool materials may be used for a priori prediction of the tribological properties of existing and newly developed grades of HSS.

Keywords

Entropy High-speed steels Friction coefficient Wear resistance Surface layer properties Microhardness Micro elasticity 

References

  1. 1.
    Ryzhkin AA et al (2016) Structurno-termodinamicheskie aspekti povischenia rabotosposobnosti IRM (Structural and thermodynamic aspects of efficiency of cutting tool materials). Dinamika tehnicheskih system, pp 50–58Google Scholar
  2. 2.
    Kojevnikov DV (2005) Rejuschiy instrument (Metal cutting tools). Maschinostroeniye, MoscowGoogle Scholar
  3. 3.
    Schagun VI (2002) Rejuschiy instrument (Metal cutting tools). PION, MinskGoogle Scholar
  4. 4.
    Ryzhkin AA (2016) Techniko-economicheskie i termodinamicheskie aspekti optimizacii lezviynoiy obrabotki (Technical, economic and thermodynamic aspects of blade processing optimization). Vestnik DGTU 16:41–50Google Scholar
  5. 5.
    Ryzhkin AA (2011) Termodinamicheskiy podhod k raschiotu intensivnosti okislitel’nogo iznaschivaniya (Thermodynamic approach to calculating the intensity of oxidative wear of hard alloys). Mehanica i tribologia tranportnih system, pp 195–203Google Scholar
  6. 6.
    Ryzhkin AA et al (1980) Ob entropiynom podhode k ocenke iznosa pri vneschnem trenii (The entropy approach to estimation of external friction wear). Obrabotka metallov davleniem, Rostov-on-Don, pp 170–176Google Scholar
  7. 7.
    Ryzhkin AA (1994) Termodinamicheskie aspekti iznaschivaniya IRM (Thermodynamic aspects of wear of tool cutting materials). Beziznostnost, Rostov-on-Don, pp 9–46Google Scholar
  8. 8.
    Ryzhkin AA (2004) Sinergetika iznaschinaniya instrumental’nich rejutchich materialov, triboelectricheskiy aspekt (Synergetics of cutting tool materials wear processes, triboelectric aspect). Izd. tsentr DGTU, Rostov-on-DonGoogle Scholar
  9. 9.
    Karapet’yanc MH (1975) Himicheskaya termodinamica (Chemical thermodynamic). Himiya, MoscowGoogle Scholar
  10. 10.
    Guchman AA (2010) Ob osnovah termodinamiki (The grounds of thermodynamic). LKI, MoscowGoogle Scholar
  11. 11.
    Moran MJ (1999) Engineering thermodynamics. CRC Press LLCGoogle Scholar
  12. 12.
    Prigozhin I, Kondepudi D (2002) Sovremennaya termodinamika ot teplovih dvigateley do dissipativnich structur (Modern thermodynamic from heat engines to dissipative structures). Mir, MoscowGoogle Scholar
  13. 13.
    Karapetyants MH (1975) Vvedenie v teoriyu himicheskih processov (Introduction in theory of chemical processes). Vischaya shkola, MoscowGoogle Scholar
  14. 14.
    Gurvich LV (1979) Termodinamicheskie svoiystva individual’nih veschestv (Thermodynamic properties of individual substances). Nauka, MoscowGoogle Scholar
  15. 15.
    Kregelskiy IV et al (1977) Osnovi raschetov na trenie i iznos (Basis of calculation for friction and wear). Mashinostroenie, MoscowGoogle Scholar
  16. 16.
    Blau PJ (2009) Friction science and technology: from concepts to applications. Taylor &Fransis Group LLCGoogle Scholar
  17. 17.
    Frolov KV (2008) Sovremenaya tribologiya (Modern tribology). LKI, MoscowGoogle Scholar
  18. 18.
    Ryhkin AA et al (2016) Otsenka rabotosposobnosti visokoentropiynih instrumentalnih rezhushtih materialov (Determination of the efficiency of high-entropy cutting tool materials). Trenie Iznos 1:60–69Google Scholar
  19. 19.
    Ryhkin AA et al (2017) Otsenka triboelectricheskich haracteristic bistrorezhushtih staley (Estimation of triboelectrical properties of high-speed steels). Vestnik DGTU 2:20–29Google Scholar
  20. 20.
    Diomkin NB (1970) Kontaktirovanie sherohovatih poverhnostey (Contacting of rough surfaces). Nauka, MoscowGoogle Scholar
  21. 21.
    Blau PJ (1985) Relationship between Knoop and scratch micro-identation hardness and implications for abrasive wear. Microstruct Sci 12:293–313Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • A. A. Ryzhkin
    • 1
  • E. V. Fominoff
    • 1
  • C. G. Shuchev
    • 1
  1. 1.Don State Technical UniversityRostov-on-DonRussia

Personalised recommendations