Advertisement

Research of Temperature Phenomena During Machining Surface Plastic Deformation of Detail

  • Ya. N. Oteny
  • E. V. Morozova
  • V. F. Kazak
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Surface plastic deformation of rollers is widely used to ensure the specified quality parameters of the surface layer of machine parts during their processing. Thermal processes during the processing of details by superficial plastic deformation of rollers can significantly influence the quality of the surface layer. In the article, the issues of identification regularities of the influence of processing modes and design parameters of deforming rollers at surface plastic deformation of a detail on the formation of temperature in the contact area between a deforming roller and a processed surface are considered. The known literature references do not provide uniform data in terms of applied calculation methods, therefore, it makes it difficult to conduct a comprehensive analysis of obtained dependencies and limits the ability to compare different options. The mathematical model is based on studying the process of a surface plastic deformation of calculating temperature in the contact region. Based on the research of resulting mathematical model, it is established that the temperature formed in the contact zone is much smaller than the permissible one at which there can be a change in the quality parameters of the surface layer.

Keywords

Plastic deformation Machining Temperature phenomena Detail 

References

  1. 1.
    YaI Barac (1973) Izmerenie kontaktnyh temperatur pri poverhnostnom plasticheskom deformirovanii (The measurement of contact temperatures during surface plastic deformation). J Vestnik mashinostroeniya 4:56–58Google Scholar
  2. 2.
    Barac YaI (1959) Poverhnostnoe uprochnenie detalej mashin obkatkoj rolikami (Surface hardening of machine parts by tool roller). Gosudarsvennoe nauchno-tehnicheskoe izdatel’stvo chernoj i cvetnoj metallurgii, Har’kovGoogle Scholar
  3. 3.
    Braslavskij VM (1977) Raschet glubiny naklepa s uchetom formy plasticheski deformirovannoj poverhnosti (The calculation of the depth of cold-hardening into account the shape of the plastically deformed surface). J Vestnik mashinostroeniya 4:62–66Google Scholar
  4. 4.
    Demkin NB (1962) Fakticheskaya ploshhadka kasaniya tverdyh poverhnostej (The actual surface of contact of hard surfaces). Izdatelstvo AN SSSR, MoscowGoogle Scholar
  5. 5.
    Zhasimov MM (1976) Zakony raspredeleniya kontaktnyh davlenij, deformacij i naprjazhenij pri PPD (The laws of distribution of contact pressures, deformations and stresses during surface plastic deformation). Mashinostroenie. KazPTI, Alma-Ata, pp 116–130Google Scholar
  6. 6.
    Konovalov EG, Pyatosin EI Armaderova GB (1974) Analiticheskij raschet usilij i naprjazhenij pri poverhnostnom plasticheskom deformirovanii rolikovym instrumentom (Analytical calculation of forces and stresses during surface plastic deformation by roller tool). In: Progressivnye processy uprochneniya poverhnostnym plasticheskim deformirovaniem. MDNTP, Moscow, pp 11–17Google Scholar
  7. 7.
    Kurguzoe JuI (1976) Raschet ploshhadi kontakta pri obkatyvanii (The calculation of contact area during rolling). Poverhnostnoe uprochnenie detalej mashin i instrumentov. KPTI, Kujbyshev, pp 43–49Google Scholar
  8. 8.
    Odincov LG (1987) Uprochnenie i otdelka detalej poverhnostnym plasticheskim deformirovaniem: Spravochnik (Hardening and finishing of parts by surface plastic deformation: book of reference). Mashinostroenie, MoscowGoogle Scholar
  9. 9.
    YaN Oteny (2005) Tehnologicheskoe obespechenie kachestva detalej mashin poverhnostnym plasticheskim deformirovaniem (Technological assurance of the quality of machine parts by surface plastic deformation). VolgGTU, VolgogradGoogle Scholar
  10. 10.
    YaN Oteny (2006) Analiz kontaktnyh napryazhenij pri postoyannoj nagruzke na deformiruyushhij rolik (The analysis of contact stresses at a constant load on a deforming roller). J STIN 2:36–37Google Scholar
  11. 11.
    YaN Oteny (2006) Sravnenie rezultatov opredeleniya glubiny uprochneniya poluchennyh raznymi avtorami (Comparison of the results of determination of the hardening depth obtained by different authors). J Uprochnjajushhie tehnologii i pokrytija 2:3–4Google Scholar
  12. 12.
    Oteny YaN (2006) Temperatura v kontaktnoj zone pri obrabotke detalej poverhnostnym plasticheskim deformirovaniem (The temperature in the contact zone during treatment of detail by surface plastic deformation). In: Izvestiya vysshih uchebnyh zavedenij. Mashinostroenie MGTU of Baumana 2:60–64Google Scholar
  13. 13.
    YaN Oteny (2006) Kinematika tochek poverhnosti detali pri uprugoplasticheskom deformirovanii rolikom (The kinematics of points of a surface of a detail at an elastoplastic deformation by a roller). J Uprochnjajushhie tehnologii i pokrytija 5:7–10Google Scholar
  14. 14.
    Oteny YaN, Kazak VF, Virt AJe (2006) Jeksperimentalnoe opredelenie proskal’zyvaniya deformiruyushhego rolika pri ego kachenii po poverhnosti s uprugoplasticheskimi svojstvami (Experimental determination of slippage of a deforming roller during its rolling along the surface with elastoplastic properties). J Kontrol, Diagnostika 12:24–27Google Scholar
  15. 15.
    Papshev DD (1978) Otdelochno-uprochnyayushhaya obrabotka poverhnostnym plasticheskim deformirovaniem (The finishing-hardening treatment by surface plastic deformation). Mashinostroenie, MoscowGoogle Scholar
  16. 16.
    Proskuryakov YuG, Kulikovskih IA (1965) Teplovye yavleniya i kachestvo poverhnostnogo sloya v processe mehanicheskogo naklepyvaniya (Thermal phenomena and the quality of the surface layer in the process of mechanical riveting). Uprochnenie detalej mashin mehanicheskim naklepyvaniem. Nauka, Moscow, pp 23–31Google Scholar
  17. 17.
    Reznikov AN, Reznikov LA (1990) Teplovye processy v tehnologicheskih sistemah (Thermal processes in technological systems). Mashinostroenie, MoscowGoogle Scholar
  18. 18.
    Smeljanskij VM (2002) Mehanika uprochnenija detalej poverhnostnym plasticheskim deformirovaniem (The mechanics of hardening of parts by surface plastic deformation). Mashinostroenie, MoscowGoogle Scholar
  19. 19.
    Smolnikov NYa, Oteny YaN, Olshtynskij SN (2000) Predstavlenie kontaktnoj zony v kachestve istochnika teplovydeleniya pri poverhnostnom plasticheskom deformirovanii (The representation of the contact zone as a heat source during surface plastic deformation). In: Fundamental and Applied Technological Problems of Machine Building. Fundamental’nye i prikl. probl. tehnol. mashinostr. Sbornik nauch. trudov mezhdunar. distancionnoj nauch.-tehn. konf. University of Orel, Orel, pp 88–90Google Scholar
  20. 20.
    Smolnikov NYa, Oteny YaN, Olshtynskij SN (2002) Issledovanie vliyaniya radiusa i glubiny vnedrenija rolika na ploshhad’ i obyom kontaktnoj zony pri obkatyvanii (The investigation of the influence of the radius and the depth of roller penetrate on the area of contact zone during rolling). In: Poljanchikov YuN (ed) Progressivnye tehnologii v mashinostroenii. Mezhvuz. sb. nauch. trudov. VolgGTU, Volgograd, pp 82–85Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Kamishin Technological Institute (Branch) the Volgograd State Technical UniversityKamyschinRussia
  2. 2.Saint Petersburg Electrotechnical University “LETI”Saint PetersburgRussia

Personalised recommendations