Advertisement

Renovation Repair of Trunk Pipeline While Operation

  • V. A. Gafarova
  • N. K. Krioni
  • A. D. Mingazhev
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Main pipelines for oil and gas transportation are among the most expensive and largest facilities operating under the most difficult environmental conditions and requiring a number of activities aimed at their maintenance. In this context, the development of new high-performance pipeline repair technologies is one of the most urgent tasks to ensure their use reliability. The occurrence of new repair methods and improvement of the existing ones, especially the methods making it possible to restore defective sections without stopping the products transportation process, remains strongly sought-for in terms of main pipelines where any forced stop causes significant economic damage.

Keywords

Pipeline Defects Microcracks Safety Corrective maintenance Reliability 

Notes

Acknowledgements

Researches are conducted in Ufa State Petroleum Technological University as a part of developing of initiative fundamental scientific project according to state order to higher education for 2017-2019 (№ 9.7294.2017/CU of 31.01.2017).

References

  1. 1.
    Scherbanin YA (2009) Regarding the assessment of possibilities of the Russian transportation system in serving the interests of Russia. Sci Works RAS Inst Natl Econ Forecast 7:249–267Google Scholar
  2. 2.
    Shoter PI (2015) Development and approval of national standard “Trunk oil and oil product pipeline transport”. Welded steel pipes. Tech Specif Oil Oil Pipeline Transp Sci Technol 4:113–119Google Scholar
  3. 3.
    № 07-2011, Midstream operations, ANSI/ASME B31G manual for determining the remaining strength of corroded pipelinesGoogle Scholar
  4. 4.
    Skuridin NN (2012) Methods of statistical data processing to evaluate corrosion of main oil pipelines. Sci Works RAS Inst Natl Econ Forecast 2:91–95Google Scholar
  5. 5.
    Skuridin NN (2012) Practical testing of system used to monitor corrosion protection at facilities of ak Transneft’s main pipelines. Sci Works RAS Inst Natl Econ Forecast 3:84–88Google Scholar
  6. 6.
    Lisin YV (2017) Research of changes of pipeline metal properties during operation: summary of results and prospective developments of Ufa scolarly tradition. Sci Works RAS Inst Natl Econ Forecast 2:22–30Google Scholar
  7. 7.
    RD-23.040.00-KTN-386-09. OJC “JC” Transneft. Technology of repair of main oil pipelines and oil product pipelines with pressure up to 6.3 MPaGoogle Scholar
  8. 8.
    BS 7910:2013+A1:2015. BSI Standards Publication, Guide to methods for assessing the acceptability of flaws in metallic structuresGoogle Scholar
  9. 9.
    DNV-RP-F101. Recommended practice. Corroded pipelinesGoogle Scholar
  10. 10.
    Gumerov AK (2007) Mechanisms of destruction of main pipelines with welded elements. Oil Gas Eng 4:7–10MathSciNetGoogle Scholar
  11. 11.
    Seleznev VE (2009) Basics of main pipelines numerical modelling, MoscowGoogle Scholar
  12. 12.
    Klimov PV (2006) Analysis of the normative and technical base in the field of industrial safety of the gas pipeline of the republic of Kazakhstan. Oil Gas Bus 2:1–14Google Scholar
  13. 13.
    Neganov DA (2017) Computer simulation of the formation process for a large-diameter pipe stock. Sci Works RAS Inst Natl Econ Forecast 2:48–55Google Scholar
  14. 14.
    Pokrovskiy VV, Dragunov YuG, Karzov GP, Rogov MF (1995) Method of increasing the structures resistance to cracks occurrence. RF Patent 2041418, Bull 22Google Scholar
  15. 15.
    Golovin SV, Goncharov NG, Lopatin EB, Mazel AG, Romanova IA, Khomenko VI, Gobarev LA (1997) Method of preventing the pipelines walls defects development. RF Patent 2097646. Bull 33Google Scholar
  16. 16.
    Kuzbozhev AS, Aginey RV, Popov VA (2007) Method of preventing the pipelines walls defects development. RF Patent 2295088. Bull 7Google Scholar
  17. 17.
    Kuzeev IR, Gafarova VA, Mingazhev AD (2016) Method of pipeline corrective maintenance and the device for performing it. RF Patent 2601782. Bull 31Google Scholar
  18. 18.
    Gafarova VA (2014) Analysis of methods and review of composite materials for cracks in structures, Actual problems of science and technologyGoogle Scholar
  19. 19.
    Nevzorov VN (2016) Modeling of the process of penetration of composite material into the cavity of a crack. Weld ControlGoogle Scholar
  20. 20.
    Gafarova VA (2017) Filling of cracks and cracks-like defects in oil and gas equipment with a composite material. Sci Technol ProdGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • V. A. Gafarova
    • 1
  • N. K. Krioni
    • 2
  • A. D. Mingazhev
    • 2
  1. 1.Ufa State Petroleum Technological UniversityUfaRussia
  2. 2.Ufa State Aviation Technical UniversityUfaRussia

Personalised recommendations