Advertisement

Strengthening of Low-Alloyed Steels by Carbides During Carbon-Black-Gas Carburizer Cementation

  • N. Kanatnikov
  • O. Ivanova
  • G. Harlamov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The technology of thermochemical strengthening of widely using low-alloyed steels 50HG, 50HF, and 50 HGF by carbides is proposed. The technology provides the self-sharpening of cutting tools during the organic material processing and consists in its saturation by the cementite followed by heat treating as the hardening with medium-temperature tempering. The influence of cementite particles on wear resistance of the cemented layers was investigated. It is shown that alloyed cementite can be applied to surface hardening of the details of tillage machines and tools for organic materials cutting.

Keywords

Hardened steel Cementation Carbonization Low-alloy steel 

Notes

Acknowledgements

This work was carried out during the execution of the Russian President’s grant for state support of young Russian scientists PhD “Theoretical and experimental research of thermal processes occurring in the processing of the bevel gears” No. 14.Z56.17.107-MK.

References

  1. 1.
    Beer P, Rudnicki J, Ciupinski L, Djouadi MA, Nouveau C (2003) Modification by composite coatings of knives made of low alloy steel for wood machining purposes. Surf Coat Technol 174:434–439CrossRefGoogle Scholar
  2. 2.
    Facello A, Cavallo E, Magagnotti N, Paletto G, Spinelli R (2013) The effect of knife wear on chip quality and processing cost of chestnut and locust fuel wood. Biomass Bioenerg 59:468–476CrossRefGoogle Scholar
  3. 3.
    Karltun J, Vogel K, Bergstrand M, Eklund J (2016) Maintaining knife sharpness in industrial meat cutting: a matter of knife or meat cutter ability. Appl Ergon 56:92–100CrossRefGoogle Scholar
  4. 4.
    Spinelli R, Glushkov S, Markov I (2014) Managing chipper knife wear to increase chip quality and reduce chipping cost. Biomass Bioenerg 62:117–122CrossRefGoogle Scholar
  5. 5.
    Verhoeven JD, Pendray AH, Clark HF (2008) Wear tests of steel knife blades. Wear 265(7):1093–1099CrossRefGoogle Scholar
  6. 6.
    Vuorinen E, Ojala N, Heino V, Rau C, Gahm C (2016) Erosive and abrasive wear performance of carbide free bainitic steels–comparison of field and laboratory experiments. Tribol Int 98:108–115CrossRefGoogle Scholar
  7. 7.
    Rozanov AN (1954) Tverdost’ cementita (The hardness of cementite). Metalloved term obrab met 1:149–155 (in Russ.)Google Scholar
  8. 8.
    Bogachev IN, Rozhkova SB (1960) O tverdosti cementite (On the hardness of cementite). Litejnoe proizvod 5:34–36 (in Russ.)Google Scholar
  9. 9.
    Taran JuN, Novik VI (1967) Stroenie cementita belogo chuguna (Structure of cementite of white cast iron). Litejnoe proizvod 1:34–38 (in Russ.)Google Scholar
  10. 10.
    Komanduri R, Hou ZB (2000) Thermal modeling of the metal cutting process: part I—temperature rise distribution due to shear plane heat source. Int J Mech Sci 42(9):1715–1752CrossRefGoogle Scholar
  11. 11.
    Huang Y, Liang SY (2003) Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning. Int J Mach Tools Manuf 43(3):307–315MathSciNetCrossRefGoogle Scholar
  12. 12.
    Karpat Y, Özel T (2006) Predictive analytical and thermal modeling of orthogonal cutting process—part I: predictions of tool forces, stresses, and temperature distributions. J Manuf Sci Eng 128(2):435–444CrossRefGoogle Scholar
  13. 13.
    M’Saoubi R, Chandrasekaran H (2011) Experimental study and modelling of tool temperature distribution in orthogonal cutting of AISI 316L and AISI 3115 steels. Int J Adv Manuf Technol 56(9):865–877CrossRefGoogle Scholar
  14. 14.
    Barsukov G, Zhuravleva T, Kozhus O (2017) Increasing of efficiency of environmentally friendly technology of AWJ of a glass fiber plastic. IOP Conf Ser Earth Environ Sci 50(1):012001CrossRefGoogle Scholar
  15. 15.
    Karpat Y, Özel T (2008) Analytical and thermal modeling of high-speed machining with chamfered tools. J Manuf Sci Eng 130(1):011001CrossRefGoogle Scholar
  16. 16.
    Outeiro JC, Pina JC, M’saoubi R, Pusavec F, Jawahir IS (2008) Analysis of residual stresses induced by dry turning of difficult-to-machine materials. CIRP Ann Manuf Technol 57(1):77–80CrossRefGoogle Scholar
  17. 17.
    Özel T, Sima M, Srivastava AK, Kaftanoglu B (2010) Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations. CIRP Ann Manuf Technol 59(1):77–82CrossRefGoogle Scholar
  18. 18.
    Davies MA, Cao Q, Cooks AL, Ivester R (2003) On the measurement and prediction of temperature fields in machining AISI 1045 steel. CIRP Ann Manuf Technol 52(1):77–80CrossRefGoogle Scholar
  19. 19.
    Arrazola PJ, Arriola I, Davies MA, Cooke AL, Dutterer BS (2008) The effect of machinability on thermal fields in orthogonal cutting of AISI 4140 steel. CIRP Ann Manuf Technol 57(1):65–68CrossRefGoogle Scholar
  20. 20.
    Pereverzev VM (1977) Diffuzionnaja karbidizacija stali (Diffusion carbidization of steel). Izdatel’stvo Voronezhskogo universiteta, Voronezh (in Russ.)Google Scholar
  21. 21.
    Pereverzev VM, Kolmykov VI, Vorotnikov VA (1990) Vlijanie karbidov na stojkost’ cementovannyh stalej k iznashivaniju v kvarcevom abrazive (Effect of carbides on the resistance of cemented steels to wear in quartz abrasives). Metalloved term obrab met 4:45–47 (in Russ.)Google Scholar
  22. 22.
    McLellan RB, Dunn WW (1970) The thermodynamics of austenite. Scr Metall 4(5):321–326CrossRefGoogle Scholar
  23. 23.
    Chipman J, Brush EF (1968) The activity of carbon in alloyed austenite at 1000 °C. Trans Met Soc AIME 242(1):35–41Google Scholar
  24. 24.
    Benz R, Elliott JF, Chipman J (1974) Thermodynamics of the carbides in the system Fe–Cr–C. Metall Mater Trans B 5(10):2235–2240CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Orel State UniversityOrelRussia

Personalised recommendations