Intensification of Technical Grinding Modes by Managing Physical Processes of Chip Formation

  • O. G. KulikEmail author
  • E. D. Illarionova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The article describes the control mechanism of interaction between the abrasive grain and the processed metal, the interaction being based on the hypothesis of the shift in the phase transition points under the Clausius–Clapeyron’s law, when the temperature and pressure rise at a high speed in the contact arc between the inclined blunting site of the abrasive grain and the metal. The metal separated from the bulk and consolidated like this, shortly remaining extra hard at the melting temperature, is itself capable to make an edge micro cut of the chips when it moves together with the grain at a speed of 10−5–10−6 s and higher.


Grinding Chip formation Chip types Dispersing products 


  1. 1.
    Poluhin PI et al (1983) Resistance to plastic de-formation of metals and alloys. Mechanical Engineering, Moscow, 276 pGoogle Scholar
  2. 2.
    Filimonov LN (1979) High-speed grinding. Mashinostroyenie, Leningrad, p 248Google Scholar
  3. 3.
    Shumyacher VM, Slavin AV (2008) The mechanical and chemical principles of abrasive processing management with the help of LCTM. In: Digest of the All-Russia scient.-tech. conf.: New chemical technologies: production and application. Technology of mechanical engineering, pp 29–32Google Scholar
  4. 4.
    Lahtin YM (1976) Metallurgy and heat treatment of metals. Metallurgy, Moscow, p 231Google Scholar
  5. 5.
    Kaplonek W et al (2016) Morphology of near- and semispherical melted chips after the grinding processes using sol-gel abrasives based on SEM-imaging and analysis. Adv Mater Sci Eng. Scholar
  6. 6.
    Nadolny K, Kaplonek W (2016) The effect of wear phenomena of grinding wheels with sol-gel alumina on chip formation during internal cylindrical plunge grinding of 100Cr6 steel. Int J Adv Manuf Technol 87(1):501–517. Scholar
  7. 7.
    Wong YC, Doyle ED (1999) Implications of high strain de-formation in grinding. Wear 233:395–401. Scholar
  8. 8.
    Doyle ED, Dean SK (1980) An insight into grinding from materials viewpoint. CIRP Ann Manuf Technol 29(2):571–575. Scholar
  9. 9.
    Malkin S (1979) Negative rake cutting to simulate chip formation in grinding. CIRP Ann Manuf Technol 28(1):209–212Google Scholar
  10. 10.
    Setti D et al (2014) An investigation into the application of Al2O3nanofluid-based minimum quantity lubrication technique for grinding of Ti-6Al-4V. Int J Precis Technol 4(3/4):268–279. Scholar
  11. 11.
    Bykadorova OG (2008) More efficient deep grinding. Russ Eng Res 28:836–837. Scholar
  12. 12.
    Kulik OG, Demenkov VA (2017) Kinematics and dynamics of chip formation during grinding. Proc Eng 206:210–215. Scholar
  13. 13.
    Kulik OG, Demenkov VA (2017) The management of kinematic factors for the improvement of performance of deep grinding. Proc Eng 206:2016–2221. Scholar
  14. 14.
    Jacobson MO (1956) Roughness, work hardening and residual stresses during machining. Mashgiz, MoscowGoogle Scholar
  15. 15.
    Carslaw G, Jager D (1964) Thermal conductivity of solids. Nauka, MoscowGoogle Scholar
  16. 16.
    Bykadorova OG, Shumyacher VM (2003) The mechanism of metal dispersion of abrasive grain, In: Proceedings of International scientific and engineering conference “Shlifabraziv-2003”. Volzhsky, pp 38–39Google Scholar
  17. 17.
    Bykadorova OG, Shumyacher VM (2004) Relationship management of abrasive grain and metal to be treated in order to increase the efficiency of the grinding. In: Proceedings of XXIV conference of the Russian school on the problems of science and technology, dedicated to the 80th anniversary of Acad. V.P. Serbin vol 2, pp 118–125Google Scholar
  18. 18.
    Bykadorova OG, Shumyacher VM (2004) The mechanism of contact interaction of the abrasive grain and the treated surface during grinding. In: Proceedings of VIII All-Russian scientific-practical conference: modern technologies in mechanical engineering, Penza, pp 54–58Google Scholar
  19. 19.
    Bykadorova OG, Shumyacher VM (2005) The role of the wear plat-form of tops of abrasive grains in the metal dispersed during grinding. In: Proceedings of III-rd international scientific and engineering conference: materials and technologies of the XXI century, Penza, pp 82–85Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Volzhsky Polytechnic Institute (Branch), Volgograd State Technical UniversityVolzhskyRussia

Personalised recommendations