Advertisement

Influence of Thermoplastics Advanced Ultrasonic Treatment on Treated Surface Roughness After Turning

  • O. Yu. Erenkov
  • S. N. Khimukhin
  • A. I. Erukov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The results of experimental studies of a new method for turning billets from thermoplastic polymers such as caprolon and fluoroplastic are presented. The technical essence of the method is in the workpiece advanced processing by ultrasonic vibrations using preliminary machining. Experimental studies were carried out on a lathe which is equipped with an ultrasonic oscillatory system. Roughness level profilograms of the caprolon and fluoroplastic-treated surfaces are used for visual and operational control of the turning process. The results of the experimental verification of the developed method confirmed the expediency of its implementation since the use of advanced ultrasonic treatment during turning of thermoplastics leads to a decrease in the roughness level of the treated surface of the part as evidenced by the values of roughness parameters and the type of chips obtained.

Keywords

Thermoplastics Turning Ultrasonic vibrations Roughness Chip formation 

References

  1. 1.
    Poduraev VN (1974) Cutting of hard materials. Mashinostroenie, Moscow (in Russ)Google Scholar
  2. 2.
    Ahmad J (2009) Machining of polymer composites. Springer Science & Business Media, New YorkCrossRefGoogle Scholar
  3. 3.
    Klocke F (2011) Manufacturing processes: cutting. Springer-Verlag, BerlinCrossRefGoogle Scholar
  4. 4.
    Dornfeld DA, Lee D (2008) Precision manufacturing. Springer, New YorkCrossRefGoogle Scholar
  5. 5.
    Hong H (2012) Machining technology for composite materials: principles and practice. Elsevier, AmsterdamGoogle Scholar
  6. 6.
    Davim JP (2013) Nontraditional machining processes: research advances. Springer Science & Business Media, New YorkCrossRefGoogle Scholar
  7. 7.
    Erenkov OYu, Ivakhnenko AG, Protasev VB (2017) Research the quality of the caprolon turning with ceramic cutting tools. MATEC Web Conf 129:1–4.  https://doi.org/10.1051/matecconf/201712901015CrossRefGoogle Scholar
  8. 8.
    Erenkov OYu, Sigitova MA (2016) New concept for high-throughput turning of polymers. Chem Pet Eng 51:636–639.  https://doi.org/10.1007/s10556-016-0099-3CrossRefGoogle Scholar
  9. 9.
    Erenkov OYu, Vereshchagina AS, Kravchenko EG (2016) Machining polymer workpieces on a lathe after preliminary surface deformation. Russ Eng Res 36:376–378.  https://doi.org/10.3103/S1068798X1605004XCrossRefGoogle Scholar
  10. 10.
    Erenkov OYu, Bogachev AP (2016) Turning of polymers with pulsed electromagnetic irradiation of the workpiece. Russ Eng Res 36:466–468.  https://doi.org/10.3103/S1068798X16060095CrossRefGoogle Scholar
  11. 11.
    Erenkov OYu, Kovalchuk SA, Gavrilova AV (2007) Combined method of plastic work piece machining based on a pretreatment mechanical down. Rare Met 26:20–24Google Scholar
  12. 12.
    Erenkov OYu (2016) The method of turning of billets from caprolon. Russian Federation patent 2574764, 20 Oct 2016Google Scholar
  13. 13.
    Erenkov OYu (2016) Device for processing billets from caprolon. Russian Federation patent 2584207, 20 Oct 2016Google Scholar
  14. 14.
    Ivakhnenko AG, Erenkov OYu (2013) Oscillatory process of production systems during turning of caprolon blanks manufacturing technology. Chem Pet Eng 49:411–417.  https://doi.org/10.1007/s10556-013-9766-9/CrossRefGoogle Scholar
  15. 15.
    Erenkov OYu (2014) Innovative technologies of mechanical cutting of polymeric materials. Komsomolsk-on-Amur Gos Tekh Univ, Komsomolsk-on-Amur (in Russ)Google Scholar
  16. 16.
    Hong H, Tsa H (2012) Advanced analysis of nontraditional machining. Springer, New YorkGoogle Scholar
  17. 17.
    Erenkov OYu, Ivakhnenko EO (2014) Study of the effect of cutting regimes on chip formation. Chem Pet Eng 50:273–276.  https://doi.org/10.1007/s10556-014-9894-xCrossRefGoogle Scholar
  18. 18.
    Kartashov EM, Tsoy B, Shevelev VV (2002) Structural—statistical kinetics of polymer destruction. Chemistry, Moscow, p 736Google Scholar
  19. 19.
    Askadskii AA (1973) Deformation of polymers. Khimiya, Moscow (in Russ)Google Scholar
  20. 20.
    Bartenev GM, Zelenev YuV (1974) Course in polymer physics. Khimiya, Leningrad (in Russ)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • O. Yu. Erenkov
    • 1
  • S. N. Khimukhin
    • 2
  • A. I. Erukov
    • 3
  1. 1.Pacific National UniversityKhabarovskRussia
  2. 2.Institute of Materials Science of Far Eastern Branch of the Russian Academy of SciencesKhabarovskRussia
  3. 3.Komsomolsk-na-Amure State UniversityKomsomolsk-na-AmureRussia

Personalised recommendations