Advertisement

Cutting Teeth of Non-involute Gears of the Cylinder–Conical Internal Transmission of Internal Gearing

  • B. A. Lopatin
  • R. I. Zaynetdinov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The paper deals with a cylinder–conical internal gearing consisting of an involute cylindrical wheel with internal teeth and a cone-shaped (according to the form of the workpiece) non-involute gear, the axis of which is at the angle to the wheel axis. With the use of these gearings, it is possible to create eccentric planetary transmissions with two inclined satellites which implement large gear ratios (in the power drives 90–500) and having high load capacity with relatively simple design. In their characteristics, they are comparable with harmonic gear, but more reliable. However, non-involute gear teeth have a complex barrel-shaped, getting them theoretically accurate surface difficult. Cutting teeth of the considered gear can be carried out with a sufficient practical accuracy in the machine gearing of the workpiece and the tooth-carving hob as it moves along a certain curvilinear trajectory. The dependencies for determining the trajectory of the axis of the milling cutter when cutting teeth of a non-involute gear of the cylinder–conical transmission of internal gearing are obtained. The movement of the milling cutter along a curved path can be realized in CNC tooth milling machines. In the paper, the example of calculation of a trajectory of motion of the axis of the cutters for cutting the teeth of a crown pinion planetary reducer with internal, helical-bevel gearing is shown. The research results were used in the design and manufacture of planetary gearboxes for various purposes.

Keywords

Cylindrical–conical transmission Non-involute gear Eccentricity planetary transfer Trajectory 

Notes

Acknowledgements

The work was supported by Act 211 Government of the Russian Federation, contract No. 02.A03.21.0011.

References

  1. 1.
    Lopatin BA, Poluektov EA, Lopatin DB, Zaynetdinov RI, Rublev VM (2009) Method for cutting teeth of a non-involute gear of a cylinder-conic transmission of internal gearing. RF patent 2,364,480, 20 Aug 2009Google Scholar
  2. 2.
    Lopatin BA, Poluektov EA, Khaustov SA (2011) Formation of an internal approximate gearing of the cylinder-conical gears. Bull SUSU Ser Mech Eng 11(228):62–69Google Scholar
  3. 3.
    Poluektov EA (2011) Internal synthesis of approximate gearing helical-bevel gear. Dissertation, Kalashnikov ISTUGoogle Scholar
  4. 4.
    Lopatin BA, Poluektov EA (2012) Approximate profiling lateral surface of teeth conical gears helical bevel gear internal gear. Bull Kharkiv NTU 35:74–78Google Scholar
  5. 5.
    Poluektov EA, Khaziev TR (2017) Hobbing the bevel non-involute pinion of helical-bevel gear of internal meshing. Bull Kalashnikov ISTU 20(2):12–15CrossRefGoogle Scholar
  6. 6.
    Bezrukov VI, Goncharov YuA, Zaynetdinov RI (1983) Planetary transmission. Copyright evidence USSR 105,592, 23 Nov 1983Google Scholar
  7. 7.
    Lopatin BA, Kazartsev DN, Lopatin DB, Bezrukov VI, Rublev VM (1998) A non-gaping planetary gear. RF patent 2,101,588, 10 Jan 1998Google Scholar
  8. 8.
    Plekhanov FI, Lopatin BA (2015) Planetary gear. RF patent 2,550,598, 10 Apr 2015Google Scholar
  9. 9.
    Lopatin BA, Tsukanov ON (2005) Cylinder-conical gears: monograph. SUSU, ChelyabinskGoogle Scholar
  10. 10.
    Lopatin BA, Tsukanov ON (2012) Cylinder-conical gearing. Int J Exp Educ 11:34–36Google Scholar
  11. 11.
    Tsukanov ON (2011) Ground rules of design of helical-bevel gearing in homogeneous coordinates. SUSU, ChelyabinskGoogle Scholar
  12. 12.
    Zaynetdinov RI (1985) Research and development of eccentric planetary transmission with inclined satellites. Dissertation, Novosibirsk Electrotechnical InstituteGoogle Scholar
  13. 13.
    Lopatin BA (1998) Development of theoretical bases of design, manufacture and testing of helical bevel gears with small interaxle corners. Dissertation, Kalashnikov ISTUGoogle Scholar
  14. 14.
    Lopatin BA, Tsukanov ON (2002) Theoretical aspects of the synthesis of helical-bevel gearing in general settings. Proceedings of higher educational establishments. Engineering 2:37–40Google Scholar
  15. 15.
    Lopatin BA, Zaynetdinov RI, Plotnikova SV (2014) The control of the teeth of the non-involute gear of the cylinder-conical transmission. Bull SUSU Ser Mech Eng 14(1):52–58Google Scholar
  16. 16.
    Lopatin BA, Plotnikova SV, Khaustov SA (2015) Computer simulation of cogs profiling helical conical transmission. Bull Kurgan State Univ Ser Eng Sci 2:15–19Google Scholar
  17. 17.
    Lopatin BA, Tsukanov ON, Plotnikova SV (2003) Cylinder-conical toothed gears in car drives. Bull Mach Build 8:7–9Google Scholar
  18. 18.
    Tsukanov ON, Lopatin BA, Poluektov EA (2009) Electromechanical drive for mechanisms of the angular turn of objects of space technology. Bull Mach Build 2:14–16Google Scholar
  19. 19.
    Bruzhas VV, Lopatin BA (2015) Development of solid-state models for the gears of different geometry. Procedia Eng 129:369–373CrossRefGoogle Scholar
  20. 20.
    Lopatin BA, Plotnikova SV (2015) Cilingrical gear formed by helical-bevel gearing. Sci Educ Mod Soc 8:120–121Google Scholar
  21. 21.
    Eremin VP, Eremin NV, Kirillin AN et al (2015) Creation of a new generation of electromechanical drives of transformed spacecraft systems. FSUE “GNPRKC” TsSKB-Progress, SamaraGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.South Ural State University, Branch in ZlatoustZlatoustRussia

Personalised recommendations