Advertisement

Dynamic Crack Branching in Soda-Lime Glass: An Optical Investigation Using Digital Gradient Sensing

  • Balamurugan M. SundaramEmail author
  • Hareesh V. Tippur
Conference paper
Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)

Abstract

Transparent brittle materials such as soda-lime glass (SLG) with relatively low fracture toughness and high stiffness pose unique challenges for performing full-field optical measurement of deformations and stresses to characterize their fracture behavior. The current work builds on authors’ previous report wherein the feasibility of Digital Gradient Sensing (DGS) was demonstrated for measuring stress wave induced crack-tip deformations in SLG. In this study, ultrahigh-speed photography (>1 million frames per sec) was used in conjunction with DGS and a Hopkinson pressure bar to load V-notched SLG plates to investigate the crack branching phenomenon. The experimental parameters were controlled such that a single mode-I crack that initiated at the V-notch tip propagated through the glass plate before branching into two prominent mixed-mode daughter cracks. The optical measurements of angular deflection fields that represent stress gradients in two orthogonal in-plane directions were obtained. Using higher order finite-difference based least-squares integration (HFLI) scheme, stress invariant fields (σxx + σyy) were evaluated near dynamically propagating crack-tip throughout the branching process.

Keywords

Digital gradient sensing Crack branching Soda-lime glass Dynamic fracture Hopkinson bar 

Notes

Acknowledgement

The authors would like to thank the U.S. Army Research Office for supporting this research through grants W911NF-16-1-0093 and W911NF-15-1-0357 (DURIP).

References

  1. 1.
    Yoffe, E.H.: The moving Griffith crack. Lond. Edinb. Dublin Philos. Mag. J. Sci. 42(330), 739–750 (1951)MathSciNetCrossRefGoogle Scholar
  2. 2.
    Shand, E.B.: Experimental study of fracture of glass: I, the fracture process. J. Am. Ceram. Soc. 37(2), 52–60 (1954)CrossRefGoogle Scholar
  3. 3.
    Kobayashi, A.S., Mall, S.: Dynamic fracture toughness of Homalite-100. Exp. Mech. 11, 11–18 (1978)CrossRefGoogle Scholar
  4. 4.
    Dally, J.W.: Dynamic photoelastic studies of fracture. Exp. Mech. 19, 349–381 (1979)CrossRefGoogle Scholar
  5. 5.
    Marder, G., Gross, S.: Origin of crack tip instabilities. J. Mech. Phys. Solids. 43(1), 1–48 (1995)MathSciNetCrossRefGoogle Scholar
  6. 6.
    Bobaru, F., Zhang, G.: Why do cracks branch? A peridynamic investigation of dynamic brittle fracture. Int. J. Fract. 196(1), 59–98 (2015)CrossRefGoogle Scholar
  7. 7.
    Zavattieri, P.D.: Study of dynamic crack branching using intrinsic cohesive surface with variable initial elastic stifness. GM Research & Development Centre. R&D-9650 (2003)Google Scholar
  8. 8.
    Periasamy, C., Tippur, H.V.: Measurement of orthogonal stress gradients due to impact load on a transparent sheet using digital gradient sensing method. Exp. Mech. 53(1), 97–111 (2013)CrossRefGoogle Scholar
  9. 9.
    Sundaram, B.M., Tippur, H.V.: Full-field measurement of contact-point and crack-tip deformations in soda-lime glass. Part-I: quasi-static loading. Int. J. Appl. Glas. Sci. 9(1), 114–122 (2018)CrossRefGoogle Scholar
  10. 10.
    Sundaram, B.M., Tippur, H.V.: Full-field measurement of contact-point and crack-tip deformations in soda-lime glass. Part-II: stress wave loading. Int. J. Appl. Glas. Sci. 9(1), 123–136 (2018)CrossRefGoogle Scholar
  11. 11.
    Sundaram, B.M., Tippur, H.V.: Dynamic mixed-mode fracture behaviours of PMMA and polycarbonate. Eng. Fract. Mech. 176, 186–212 (2017)CrossRefGoogle Scholar
  12. 12.
    Sundaram, B.M., Tippur, H.V.: Dynamic crack growth normal to an interface in bi-layered materials: an experimental study using digital gradient sensing technique. Exp. Mech. 56, 37–57 (2016)CrossRefGoogle Scholar
  13. 13.
    Sundaram, B.M., Tippur, H.V.: Dynamics of crack penetration vs. branching at a weak interface: an experimental study. J. Mech. Phys. Solids. 96, 312–332 (2016)MathSciNetCrossRefGoogle Scholar
  14. 14.
    Miao, C., Sundaram, B.M., Huang, L., Tippur, H.V.: Surface profile and stress field evaluation using digital gradient sensing method. Meas. Sci. Technol. 27(9), 095203 (16pp) (2016)CrossRefGoogle Scholar
  15. 15.
    Sundaram, B.M., Tippur, H.V.: Dynamic fracture of soda-lime glass: A full-field optical investigation of crack initiation, propagation and branching. 120, 132–153 (2018)CrossRefGoogle Scholar

Copyright information

© The Society for Experimental Mechanics, Inc. 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringAuburn UniversityAuburnUSA
  2. 2.Department of Mechanical EngineeringAuburn UniversityAuburnUSA

Personalised recommendations