Advertisement

History Note: Machining, Strain Gages, and a Pulse-Heated Kolsky Bar

  • R. Rhorer
  • S. Mates
  • E. Whitenton
  • T. Burns
Conference paper
Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)

Abstract

A special Kolsky bar apparatus with the capability to pulse heat the sample was built at the National Institute of Standards and Technology (NIST). This Kolsky bar laboratory’s initial purpose was to measure dynamic material properties in support of machining analysis research. Machining is a high-strain, high-strain-rate, high-temperature, high-heating-rate process. Developing mathematical models to analyze machining processes presents unique challenges, including appropriate material stress-strain relationships. The NIST system can heat a sample to over 1000 C in less than a second immediately prior to a Kolsky bar impact test. Although there are many traditional Kolsky bars in operation, the ability to achieve a very rapid temperature increase by electrical resistive heating is unique. The development and construction of this laboratory involved cooperative effort of several researchers from different NIST divisions. The work benefitted from a rich history of strain measuring research at the National Bureau of Standards (NBS), now named NIST, as well as drawing on a long history of interaction with the Society for Experimental Mechanics (SEM). .

Keywords

Experimental mechanics history Kolsky bar High-temperature dynamic testing Machining analysis Strain gages 

References

  1. 1.
    Pursell, Carroll W., Jr., Early Stationary Steam Engines in America: A Study in the Migration of a Technology, Smithsonian Institution Press, City of Washington, 1969, pg. 55Google Scholar
  2. 2.
    Taylor, F.W.: On the art of cutting metals. Trans ASME. 28, 31–248 (1907)Google Scholar
  3. 3.
    Merchant, M.E.: Mechanics of the Cutting Process. J. Appl. Phys. 216, 267–318 (1945)CrossRefGoogle Scholar
  4. 4.
    Komanduri, R., Merchant, M.E., Shaw, M.C.: U.S. Machining and Grinding Research in the 20th Century. Special Issue, Appl. Mech. Rev. 46(3), 72–132 (1993)CrossRefGoogle Scholar
  5. 5.
    Komanduri, R.: U.S. Machining and Grinding Research in the 20th Century. Special Issue, Appl. Mech. Rev. 46(3), 129–132 (1993)CrossRefGoogle Scholar
  6. 6.
    Hetenyi, M.: Handbook of Experimental Stress Analysis. Wiley, NY (1950)zbMATHGoogle Scholar
  7. 7.
    Cochrane, R.C.: Measures for Progress: a History of the National Bureau of Standards. National Bureau of Standards, U.S. Department of Commerce (1966)Google Scholar
  8. 8.
    Astin, A.V., Director, National Bureau of Standards, Characteristics and Applications of Resistance Strain Gages: Proceedings of the NBS Semicentennial Symposium of Resistance Strain Gages, Held at the NBS on November 8 and 9, 1951, National Bureau of Standards Circular 528 (1954)Google Scholar
  9. 9.
    Campbell, W.R.: Determination of dynamic stress-strain curves from strain waves in long bars. Proc. Soc. Exper. Stress Anal. X(1), 113–124 (1952)Google Scholar
  10. 10.
    Kolsky, H.: Stress Waves in Solids, Dover Publications, NY, 1963, p. 154. (The Dover edition, first published in 1963, is an unabridged and corrected republication of the work first published by the Clarendon Press, Oxford, in 1953)Google Scholar
  11. 11.
    Ramesh, K.T.: High rates and impact experiments. In: Sharpe Jr., W.N. (ed.) Springer Handbook of Experimental Solid Mechanics, pp. 929–959. Springer, NY (2008)CrossRefGoogle Scholar
  12. 12.
    Davies, M.: Internal NIST Memo: ATP Proposal 2000Google Scholar
  13. 13.
    Basak, D., Yoon, H.W., Rhorer, R., Burns, T.J., Matsumoto, T.: Temperature control of pulse heated specimens in a Kolsky bar apparatus using microsecond time-resolved Pyrometry. Int. J. Thermophys. 25(2), 561–574 (2004)CrossRefGoogle Scholar
  14. 14.
    Burns, T.J., Mates, S.P., Rhorer, R.L., Whitenton, E.P., Basak, D.: Recent Results from the NIST Pulse-Heated Kolsky Bar. Proceedings of the Society for Experimental Mechanics Annual Conference (2007)Google Scholar
  15. 15.
    Whitenton, E.: The NIST Kolsky Bar Data Processing System. Proceedings of the Society for Experimental Mechanics Annual Conference, Portland, Oregon (2005)Google Scholar

Copyright information

© The Society for Experimental Mechanics, Inc. 2019

Authors and Affiliations

  • R. Rhorer
    • 1
  • S. Mates
    • 2
  • E. Whitenton
    • 1
  • T. Burns
    • 3
  1. 1.Engineering LaboratoryNational Institute of Standards and TechnologyGaithersburgUSA
  2. 2.Materials Measurement LaboratoryNational Institute of Standards and TechnologyGaithersburgUSA
  3. 3.Information Technology LaboratoryNational Institute of Standards and TechnologyGaithersburgUSA

Personalised recommendations