Advertisement

Optimization of Electrical Discharge Machining of Titanium Alloy (Ti6Al4V) by Grey Relational Analysis Based Firefly Algorithm

  • Anshuman Kumar Sahu
  • Siba Sankar Mahapatra
Chapter

Abstract

The electrical discharge machining (EDM) is a non-conventional machining process widely used in recent days in the field of aerospace, biomedical, automobile, tool and die industries. Other conventional and non-conventional machining process does the production of EDM electrode, therefore, the cost of production of EDM electrodes account for more than 50% of the cost of the final product. Therefore, additive manufacturing (AM) technology provide the direct fabrication of the EDM electrode. Selective laser sintering (SLS) is the most suitable AM process used for the preparation of EDM tool electrode, that reduce the tool production time and total production cost of the final product. The main difficulty of the production of EDM electrode by the SLS process is the selection of the appropriate material for tool. So that, it can be easily prepared by the SLS process as well as contain the properties of EDM tool electrode. In this work, a newly developed non-conventional metal matrix composite of Al, Si and Mg is prepare directly by SLS process and used as the EDM electrode. To study the EDM performance of the newly prepared AlSiMg electrode, Titanium-alloy (Ti6Al4V) is use as work piece material and commercial grade EDM 30 oil as dielectric fluid. The performance of the newly prepared AlSiMg SLS electrode is compare with conventional copper and graphite electrodes. The EDM is performed by varying different process parameters like open circuit voltage (V), discharge current (Ip), duty cycle (τ) and pulse-on-time (Ton). Three responses like material removal rate (MRR), tool wear rate (TWR) and average surface roughness (Ra) are used to analyze study the EDM process. To reduce the number of experiments, design of experiment (DOE) approach like Taguchi’s L27 orthogonal array is used. The three output responses of the EDM specimens are optimized by GRA method combined with Firefly algorithm and the best parametric setting is reported for the EDM process.

Keywords

Electrical discharge machining Selective laser sintering Titanium alloy Grey relational analysis Firefly algorithm 

References

  1. 1.
    Arthur, A., Dickens, P.M., Cobb, R.C.: Using rapid prototyping to produce electrical discharge machining electrodes. Rapid Prototyping Journal, 2, 1, 4–12(1996)CrossRefGoogle Scholar
  2. 2.
    Czelusniak, T., Amorim, F.L., Lohrengel, A., Higa, C.F.: Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering. Int J Adv Manuf Technol, 72, 905–917 (2014)CrossRefGoogle Scholar
  3. 3.
    Sahu, A.K., Mohanty, P.P., Sahoo S.K.: Electro discharge machining of Ti-alloy (Ti6Al4V) and 316L Stainless Steel and Optimization of process parameters by Grey relational analysis (GRA) method, In: Wimpenny D.I.et al (eds.) Advances in 3D Printing & Additive Manufacturing Technologies, pp. 65–78. Springer Science+Business Media Singapore (2017)CrossRefGoogle Scholar
  4. 4.
    Nourbakhsh, F., Rajurkar, K.P., Malshe, A.P., Cao, J.: Wire electro-discharge machining of titanium alloy, Procedia CIRP 5,13–18 (2013)CrossRefGoogle Scholar
  5. 5.
    Rahul, Datta, S., Biswal, B.B., and Mahapatra, S.S.: A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization During Electro-Discharge Machining on Super Alloy Inconel 718, Arabian Journal for Science and Engineering, 42, 1999–2020 (2017)CrossRefGoogle Scholar
  6. 6.
    Mohanty, C.P., Mahapatra, S.S., and Singh, M.R.: An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm, Engineering Science and Technology an International Journal, 20, 552–562 (2017)CrossRefGoogle Scholar
  7. 7.
    Sahu, A.K., Mahapatra, S.S., Chatterjee, S.: Optimization of electro-discharge coating process using harmony search. Materials today: Proceedings, 5, 12673–12680 (2018)Google Scholar
  8. 8.
    Dewangan, S., Gangopadhyay, S., Biswas, C.K.: Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis, Measurement, 63 364–376 (2015)CrossRefGoogle Scholar
  9. 9.
    Czelusniak, T., Amorim, F.L., Higa, C.F., Lohrengel, A.: Development and application of new composite materials as EDM electrodes manufactured via selective laser sintering, Int J Adv Manuf Technol 72, 1503–1512 (2014)CrossRefGoogle Scholar
  10. 10.
    Durr, H., Pilz, R., Eleser, N. S.: Rapid tooling of EDM electrodes by means of selective laser sintering. Computers in Industry, 39, 35–45 (1999)CrossRefGoogle Scholar
  11. 11.
    Zhao, J., Li, Y., Zhang, J., Yu, C., Zhang, Y.: Analysis of the wear characteristics of an EDM electrode made by selective laser sintering, Journal of Materials Processing Technology, 138, 475–478 (2003)CrossRefGoogle Scholar
  12. 12.
    Tang, Y., Hong, J., Zhou, H., Lu, B.: A new technique for the fabrication of graphite EDM electrodes, Journal of Materials Processing Technology, 166, 199–204 (2005)CrossRefGoogle Scholar
  13. 13.
    Ding, Y., Lan, H., Hong, J., Wu, D.: An integrated manufacturing system for rapid tooling based on rapid prototyping, Robotics and Computer-Integrated Manufacturing, 20, 281–288 (2004)CrossRefGoogle Scholar
  14. 14.
    Datta, S., Mahapatra, S.S.: Modeling , simulation and parametric optimization of wire EDM process using response surface methodology coupled with grey-Taguchi technique, International Journal of Engineering, Science and Technology, 2, 5, 162–183 (2010)CrossRefGoogle Scholar
  15. 15.
    Raja, S.B., Pramod, C.V.S., Krishna, K.V., Ragunathan, A., Vinesh, S.: Optimization of electrical discharge machining parameters on hardened die steel using Firefly Algorithm, Engineering with Computers, 31, 1–9 (2015)CrossRefGoogle Scholar
  16. 16.
    Shukla, R., Singh, D.: Selection of parameters for advanced machining processes using firefly algorithm, , Engineering Science and Technology an International Journal, 20, 212–221 (2017)CrossRefGoogle Scholar
  17. 17.
    Mishra, S.B., Malik, R., Mahapatra, S.S.: Effect of external perimeter on flexural strength of FDM build parts, Arabian Journal of Science and Engineering, 42, 4587–4595 (2017)Google Scholar
  18. 18.
    Julong, D.: Control problems of grey systems, Systems & control letters, 1, 5, 288–294 (1982)MathSciNetCrossRefGoogle Scholar
  19. 19.
    Julong, D.: Introduction to Grey System Theory, The Journal of Grey Systems, 1, 1–24 (1988)MathSciNetzbMATHGoogle Scholar
  20. 20.
    Yang, X. S.: Firefly Algorithms for Multimodal Optimization, In: Watanabe, O., Zeugmann, T. (eds.): SAGA 2009, LNCS 5792, pp. 169–178, Springer-Verlag Berlin Heidelberg (2009)Google Scholar
  21. 21.
    Yang, X. S.: Multiobjective firefly algorithm for continuous optimization, Engineering with Computers, 29, 175–184 (2013)CrossRefGoogle Scholar
  22. 22.
    Yang, X. S.: Nature-inspired metaheuristic algorithms, Luniver press, United Kingdom (2010)Google Scholar
  23. 23.
    Sahu, A.K., Mahapatra, S.S., Chatterjee, S.: Optimization of electrical discharge coating process using MOORA based firefly algorithm, Proceeding of the ASME Gas Turbine Conference GTINDIA2017, December 7–8, Bangalore, India (2017)Google Scholar
  24. 24.

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • Anshuman Kumar Sahu
    • 1
  • Siba Sankar Mahapatra
    • 1
  1. 1.Department of Mechanical EngineeringNational Institute of TechnologyRourkelaIndia

Personalised recommendations