Advertisement

Trial Implementation of TiN Surface Coating for a Main Piston Towards Reducing the Opening Time for a Diaphragmless Driver Section

  • S. UdagawaEmail author
  • W. Garen
  • T. Inage
  • M. Ota
  • K. Maeno
Conference paper

Abstract

In this study, we have performed TiN coating for a free piston to decrease the abrasion resistance between the free piston and a housing, consisted of a main piston. The thickness of the TiN layer on the surface is 2 μm. The opening time of the main piston is measured by using the surface-coated free piston. As a consequence, the opening time of the main piston is achieved 500 μs for 2 mm stroke. Additionally, the shock wave has been generated in the glass tubes with 2, 3, and 4 mm diameter to confirm the shock wave propagation. The shock wave measurements are performed at the several points along the axial direction of the tube by using laser differential interferometer. Consequently, the shock wave propagation is confirmed by using the surface-coated free piston. Moreover, the experimental efficiency is drastically improved especially at the initial experimental process. However, TiN coating partly disappeared by repeated use.

Notes

Acknowledgments

The first author would like to express his best gratitude to NDK Inc., Japan, especially for the cooperation in TiN surface coating.

References

  1. 1.
    M. Brouillette, Shock waves at micro scales. Shock Waves 13, 3 (2003)CrossRefGoogle Scholar
  2. 2.
    W. Garen et al., A novel mini-shock tube for generating shock waves at micro scales in turbulent and laminar gas flows, in Proceedings of 25th ISSW, 2005, pp. 746–750Google Scholar
  3. 3.
    S. Udagawa et al., Propagation characteristics of the shock wave in small diameter tubes at atmospheric initial driven pressure. Proc. 28th ISSW 1, 529–534 (2011)Google Scholar
  4. 4.
    S. Udagawa et al., Development of a small diameter shock tube and measurement of basic characteristics. Trans. Jpn. Soc. Mech. Eng. B. 78(785), 36–48 (2005) (in Japanese)Google Scholar
  5. 5.
    H. Oguchi et al., An experiment on interaction of shock wave with multiple-orifice plate by means of snap-action shock tube, in Proceedings of 10th International Shock Tube Symposium, 1975, pp. 386–391Google Scholar
  6. 6.
    K. Maeno et al., Study on shock waves in low temperature gas by means of a nondiaphragm shock tube, in Proceedings of 15th ISSW, 1986, pp. 563–569Google Scholar
  7. 7.
    K. Maeno et al, Experiment of vapor bubble collapse in low temperature R-12 under shock compression, in Proceedings of 16th ISSW, 1988, pp. 273–279Google Scholar
  8. 8.
    S. Udagawa et al., Interferometric measurement of the shock wave propagating in a small diameter circular tube. Kouku Uchu Gijutsu 11, 99–105 (2012) (in Japanese)Google Scholar
  9. 9.
    S. Udagawa et al., Improvement of a diaphragmless driver section for a small diameter shock tube, in Proceedings of 29th ISSW, No.0246-000117, 2013Google Scholar
  10. 10.
    S. Udagawa et al., Behavior of the shock wave propagating in the small diameter tubes, in Proceedings of 30th ISSW, 2015, pp. 423–425Google Scholar
  11. 11.
    A. Abe et al., Performance evaluation of a diaphragmless shock tube with rapid opening valve assisted by magnetic force. Trans. Jpn. Soc. Mech. Eng. B. 79(806), 99–110 (2013) (inJapanese)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • S. Udagawa
    • 1
    Email author
  • W. Garen
    • 2
  • T. Inage
    • 3
  • M. Ota
    • 4
  • K. Maeno
    • 5
  1. 1.Aerospace Engineering CourseTokyo Metropolitan College of Industrial TechnologyTokyoJapan
  2. 2.Department of PhotonicsUniversity of Applied Science Emden/LeerEmdenGermany
  3. 3.Faculty of EngineeringShonan Institute of TechnologyFujisawaJapan
  4. 4.Graduate School and Faculty of EngineeringChiba UniversityChibaJapan
  5. 5.National Institute of TechnologyKisarazu CollegeKisarazuJapan

Personalised recommendations