Advertisement

Review on Film Cooling in High-Speed Flows

  • K. FujiwaraEmail author
  • R. Sriram
  • K. Kontis
  • T. Ideta
Conference paper

Abstract

This review presents the state of the art in film cooling applied to high-speed flows. Film cooling is a promising technique to reduce heat transfer and shield a surface that is exposed to high-temperature core stream. The technique applies cold pneumatic injection into a hot core stream, and while the film cooling in gas turbines is generally subsonic, it has also been a success in high-speed environment such as an extension nozzle of liquid rocket engines. The present paper aims to bring together the main results from experiments and numerical simulation on film cooling in high-speed flow. Parameters from not only fluid dynamical conditions but also gas properties and geometric features of injection affect the cooling performance.

References

  1. 1.
    R.J. Goldstein, Film cooling. Adv. Heat Tran. 7, 321–379 (1971)CrossRefGoogle Scholar
  2. 2.
    R.S. Bunker, A review of shaped hole turbine film cooling technology. J. Heat Transf. 127, 441–453 (2005)CrossRefGoogle Scholar
  3. 3.
    R. Sriram, G. Jagadeesh, Film cooling at hypersonic Mach numbers using forward facing array of micro-jets. Int. J. Heat Mass Transf. 52, 3654–3664 (2009)CrossRefGoogle Scholar
  4. 4.
    B.A. Haven, M. Kurosaka, Kidney and anti-kidney vortices in crossflow jets. J. Fluid Mech. 352, 27–64 (1997)CrossRefGoogle Scholar
  5. 5.
    J.L. Stollery, A.A.M. El-Ehwany, A note on the use of a boundary-layer model for correlating film-cooling data. Int. J. Heat Mass Transf. 8, 55–65Google Scholar
  6. 6.
    R.A. Seban, L.H. Back, Velocity and temperature profiles in turbulent boundary layers with tangential injection. J. Heat Transf. 84, 45–54 (1962)CrossRefGoogle Scholar
  7. 7.
    R.J. Goldstein et al., Film cooling with air and helium injection through a rearward-facing slot into a supersonic air flow. AIAA J. 4(6), 981–985 (1966)CrossRefGoogle Scholar
  8. 8.
    X. Yang et al., A numerical study of hypersonic laminar film cooling. Aeronaut. J., 479–486 (2003)Google Scholar
  9. 9.
    K. Pathasarathy, V. Zakkay, An experimental investigation of turbulent slot injection at Mach 6. AIAA J. 8(7), 1302–1307 (1969)CrossRefGoogle Scholar
  10. 10.
    R.W. Bass et al., Supersonic Film Cooling, AIAA second. Int. Aero. Planes Conf., 1–16 (1990)Google Scholar
  11. 11.
    M. Hombsch, H. Oliver, Film cooling in laminar and turbulent supersonic flows. J. Spacecr. Rocket. 50(4), 742–753 (2013)CrossRefGoogle Scholar
  12. 12.
    J.P. O’Connor, A. Haji-Sheikh, A Numerical Study of Film Cooling in Supersonic Flow, AIAA Paper (1991), AIAA-91-4010Google Scholar
  13. 13.
    M. Keller, M.J. Kloker, Direct numerical simulations of film cooling in a supersonic boundary-layer flow on massively-parallel supercomputers, Sustained Simulation Performance (2013), pp. 107–128Google Scholar
  14. 14.
    J. Linn, M.J. Kloker, Direct numerical simulation of film cooling in hypersonic boundary-layer flow, High Performance Computing in Science and Engineering, (2008), pp. 171–189Google Scholar
  15. 15.
    M.A. Keller et al., Influence of cooling-gas properties on film-cooling effectiveness in supersonic flow. J. Spacecr. Rocket. 52(5), 1443–1455 (2015)CrossRefGoogle Scholar
  16. 16.
    K. Mahesh, The interaction of jets with crossflow. Annu. Rev. Fluid Mech. 45, 379–407 (2013)MathSciNetCrossRefGoogle Scholar
  17. 17.
    T.F. Fric, A. Roshko, Vortical structure in the wake of a transverse jet. J. Fluid Mech. 279, 1–47 (1994)CrossRefGoogle Scholar
  18. 18.
    A.R. Karagozian, Transverse jets and their control. Prog. Energy Combust. Sci. 36, 531–553 (2010)CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of EngineeringUniversity of GlasgowGlasgowUK
  2. 2.IHI CorporationYokohamaJapan

Personalised recommendations