Transmissions and Network Management of Multiple 100 GB/s Based on Stacking Technology

  • Xin Huang
  • Kaixiong Zhou
  • Chaoxiang Shi
  • Jianxin Chang
  • Meng Gao
Conference paper
Part of the Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST, volume 237)

Abstract

We have previously proposed and implemented a small form factor and low cost 100G optical transmission system using inverse-multiplexing technology and MLD (Multiplex-Lane Distribution) mechanism [1]. Based on this 100G system, we will further implement a transmission and network management system for multiple 100G application via stacking technology. This technology can incrementally realize the standard 100G OTN or 100G Ethernet capacity expansion with a centralized network element management at one node. The stacking system contains both network management port stacking and optical wavelength stacking. Our test results show that we can stack at least four devices with stable performance, which means a maximum transmission capacity of 400G, but with one IP address or one NE (network element) network management. This technology has a significant advantage comparing with a large rack equipment in term of device cost and flexible 100G bandwidth addition, as well as simple management function.

Keywords

100G Multiple 100G Stacking Capacity expansion Network element management 

References

  1. 1.
    Yang, O., Dong, C., Liu, Q.C., Shi, C.X.: A small form factor and low cost 100 GB/s optical transmission system based on inverse-multiplexing technology. In: International Conference on Communications and Networking in China, pp. 85–89. IEEE Press, Shanghai (2015)Google Scholar
  2. 2.
    Borowiec, A.: High Capacity Transport-100G and Beyond. Invited talk, Photonics North (2015)Google Scholar
  3. 3.
    Doverspike, R.D., Yates, J.: Optical network management and control. J. Proc. IEEE 100(5), 1092–1104 (2012)CrossRefGoogle Scholar
  4. 4.
    Jia, Z., He, W., Shi, C., Chang, J., Gao, M.: Design and implementation of link loss forwarding in 100G optical transmission system. In: Chen, Q., Meng, W., Zhao, L. (eds.) ChinaCom 2016. LNICST, vol. 209, pp. 403–411. Springer, Cham (2018).  https://doi.org/10.1007/978-3-319-66625-9_39CrossRefGoogle Scholar
  5. 5.
    Liu, T.B., Liu, Y., Zhao, S.B.: Technical principle and application of H3C IRF. J. Adv. Mater. Res. 1044–1045, 1375–1379 (2014)Google Scholar
  6. 6.
    Fu, K., Ma, Z.Q., Li, X.S.: Standard research of IEEE P802.3ba in 40 GB/s, 100 GB/s ethernet. Opt. Commun. Technol., 33(11) (2009)Google Scholar
  7. 7.
    ITU-T Recommendation G.692, Interfaces for the Optical Transport Networks (2009)Google Scholar

Copyright information

© ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering 2018

Authors and Affiliations

  • Xin Huang
    • 1
  • Kaixiong Zhou
    • 1
  • Chaoxiang Shi
    • 1
  • Jianxin Chang
    • 2
  • Meng Gao
    • 2
  1. 1.School of Communication and Information EngineeringChongqing University of Posts and TelecommunicationsChongqingChina
  2. 2.CNMP Networks, Inc.BeijingChina

Personalised recommendations