Investigation of the Precipitation Processes in NiTi Filaments

  • Ondřej Tyc
  • Jan Pilch
  • Petr Šittner
  • Petr Haušild
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Precipitation in Ni-rich NiTi alloy is an influential process affecting material properties such as fatigue life, tensile strength or thermomechanical response. In this work, a nonconventional method of pulse heating by electric current was employed to recover cold-worked NiTi filaments (50 µm in diameter) and set the initial microstructure without precipitation. The impact of recovery processes and Ni-rich precipitates on mechanical properties can be separated to some extent, owing to the ultrafast electric current annealing. Afterwards, the NiTi filaments were subjected to an aging at 350–520 °C for 2–120 min. The aging at appropriate temperature allows a fluent and predictable adjustment of superelastic response together with an increase in tensile strength of approx. 20%. Small angle neutron scattering experiments were also performed to determine the mean size of Ni-rich precipitates. Less than 10 nm precipitates are created at 350 °C and 2 h aging, which yields a stable superelastic response and higher tensile strength. On the other hand, the filaments annealed at 520 °C show significant instability during superelastic cycling, a decrease in tensile strength and a precipitate mean size that significantly increases up to 500 nm.

Keywords

NiTi alloy Pulse heating Precipitation hardening Superelasticity 

Notes

Acknowledgements

We kindly acknowledge the financial support from the student grant SGS ČVUT no. SGS16/249/OHK4/3T/14 and the Czech science foundation through project no. 16-20264S.

References

  1. 1.
    Mahtabi MJ, Shamsaei N, Mitchell MR (2015) Fatigue of Nitinol: the state-of-the-art and ongoing challenges. J Mech Behav Biomed Mater 50:228–254CrossRefGoogle Scholar
  2. 2.
    Hartl DJ, Lagoudas DC (2007) Aerospace applications of shape memory alloys. J Aerospace Engineering 221:535–552.  https://doi.org/10.1243/09544100JAERO211CrossRefGoogle Scholar
  3. 3.
    Rahim M, Frenzel J, Frotscher M, Pfetzing-Micklich J, Steegmüller R, Wohlschlögel M, Mughrabi H, Eggeler G (2013) Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys. Acta Mater 61:3667–3686CrossRefGoogle Scholar
  4. 4.
    Otsuka K, Wayman CM (1998) Shape memory materials. University Press, CambridgeGoogle Scholar
  5. 5.
    Sedmák P, Sittner P, Pilch J, Curfs C (2015) Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction. Acta Mater 94:257–270CrossRefGoogle Scholar
  6. 6.
    Wang X, Kustov S, Li K, Schryvers D, Verlinden B, Van Humbeeck J (2015) Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti–50.8 at.% Ni alloy with micron-sized grains. Acta Mater 82:224–233CrossRefGoogle Scholar
  7. 7.
    Bojda O, Eggeler G, Dlouhý A (2005) Precipitation of Ni4Ti3-variants in a polycrystalline Ni-rich NiTi shape memory alloy. Scripta Mater 53:99–104CrossRefGoogle Scholar
  8. 8.
    Tirry W, Schryvers D (2005) Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi. Acta Mater 53:1041–1049CrossRefGoogle Scholar
  9. 9.
    Pelton AR, Dicello J, Miyazaki (2000) Optimisation of processing and properties of medical grade Nitinol wire. Min Invas Ther Allied Technol 9:107–118CrossRefGoogle Scholar
  10. 10.
    Otsuka K, Ren X (2005) Physical metallurgy of Ti–Ni-based shape memory alloys. Prog Mater Sci 50:511–678CrossRefGoogle Scholar
  11. 11.
    Delville R, Malard J, Pilch J, Sittner P, Schryvers D (2010) Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy. Acta Mater 58:4503–4515CrossRefGoogle Scholar
  12. 12.
    Pilch J, Heller L, Sittner P (2009) Final thermomechanical treatment of thin NiTi filaments for textile applications by electric current. Esomat 2009. EDP Sciences.  https://doi.org/10.1051/esomat/20090524

Copyright information

© The Minerals, Metals & Materials Society 2018

Authors and Affiliations

  • Ondřej Tyc
    • 1
    • 2
  • Jan Pilch
    • 2
  • Petr Šittner
    • 2
  • Petr Haušild
    • 1
  1. 1.Faculty of Nuclear Sciences and Physical Engineering of the CTU, Department of MaterialsPraha 2Czech Republic
  2. 2.Institute of Physics of the Czech Academy of SciencesPraha 8Czech Republic

Personalised recommendations