Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Al–Cu–Li Model Alloys

  • Katrin Mester
  • Baptiste Rouxel
  • Timothy Langan
  • Justin Lamb
  • Matthew Barnett
  • Thomas Dorin
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The addition of scandium (Sc) is known to be beneficial to the properties of aluminium alloys. Sc has a significant impact on the strength, especially when combined with zirconium (Zr) where nano-size Al3(Sc, Zr) dispersoids are formed. However, to date the extraction of Sc from its oxide has been too expensive to promote its use on the industrial scale. New extraction methods have made the process more cost-effective. So far, there has been only limited research done concerning the effect of Sc in Al–Cu–Li alloys. Interaction between the Al3(Sc, Zr) dispersoids and other precipitate phases containing copper (Cu) and/or lithium (Li) have been rarely studied. In this study, the impact of Sc and Zr on precipitation and further the properties of Al–Cu–Li alloys is investigated. Mechanical properties were examined by quasi-static tensile tests. Using TEM, the morphology and size of dispersoids and precipitates were examined.

Keywords

Scandium Texture Precipitation Aluminium alloy 

Notes

Acknowledgements

The authors would like to acknowledge Clean TeQ for providing in-kind Al-Sc master alloys. Dave Gray is warmly thanked for casting the alloys used in this project. Deakin University’s Advanced Characterization Facility is acknowledged for use of the Jeol 2100F transmission electron microscope.

References

  1. 1.
    Dursun, T. and C. Soutis, Recent developments in advanced aircraft aluminium alloys. Materials & Design, 2014. 56: p. 862–871.CrossRefGoogle Scholar
  2. 2.
    Boyer, R., et al., Materials considerations for aerospace applications. MRS Bulletin, 2015. 40(12): p. 1055–1066.CrossRefGoogle Scholar
  3. 3.
    Warner, T. Recently-developed aluminium solutions for aerospace applications. in Materials Science Forum. 2006. Trans Tech Publ.CrossRefGoogle Scholar
  4. 4.
    Braun, R. Investigation on microstructure and corrosion behaviour of 6XXX series aluminium alloys. in Materials science forum. 2006. Trans Tech Publ.Google Scholar
  5. 5.
    Gupta, R.K., et al., Development and characterization of Al–Li alloys. Materials Science and Engineering: A, 2006. 420(1–2): p. 228–234.CrossRefGoogle Scholar
  6. 6.
    Immarigeon, J.P., et al., Microstructural Characterization of Lightweight Structural Materials TransportationLightweight materials for aircraft applications. Materials Characterization, 1995. 35(1): p. 41–67.CrossRefGoogle Scholar
  7. 7.
    Rioja, R.J. and J. Liu, The Evolution of Al-Li Base Products for Aerospace and Space Applications. Metallurgical and Materials Transactions A, 2012. 43(9): p. 3325–3337.CrossRefGoogle Scholar
  8. 8.
    Schmitz, C., Handbook of Aluminium Recycling. 2006: Vulkan-Verlag.Google Scholar
  9. 9.
    Haasen, P. and B.L. Mordike, Physical Metallurgy. 1996: Cambridge University Press.Google Scholar
  10. 10.
    Dorin, T., et al., Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys. Materials Science and Engineering: A, 2017.CrossRefGoogle Scholar
  11. 11.
    Radmilovic, V., et al., Monodisperse Al 3 (LiScZr) core/shell precipitates in Al alloys. Scripta Materialia, 2008. 58(7): p. 529–532.CrossRefGoogle Scholar
  12. 12.
    Gottstein, G., Physikalische Grundlagen der Materialkunde. 2007: Springer Berlin Heidelberg.Google Scholar
  13. 13.
    K. E. Knipling, D. N. Seidman and D. C. Dunand. Ambient-and high-temperature mechanical properties of isochronally aged Al–0.06 Sc, Al–0.06 Zr and Al–0.06 Sc–0.06 Zr (at.%) alloys. Acta Mater., vol. 59, no. 3, pp. 943–954, 2011.Google Scholar
  14. 14.
    S.-L. Lee, C.-T. Wu, and Y.-D. Chen, Effects of Minor Sc and Zr on the Microstructure and Mechanical Properties of Al-4.6Cu-0.3 Mg-0.6Ag Alloys, J. Mater. Eng. Perform., vol. 24, no. 3, pp. 1165–1172, 2015.Google Scholar
  15. 15.
    Häusler, Ines, et al. Precipitation of T1 and θ′ Phase in Al-4Cu-1Li-0.25 Mn During Age Hardening: Microstructural Investigation and Phase-Field Simulation. Materials 10.2 (2017): 117.CrossRefGoogle Scholar
  16. 16.
    Ringer, S. P., B. C. Muddle, and I. J. Polmear. Effects of cold work on precipitation in Al-Cu-Mg-(Ag) and Al-Cu-Li-(Mg-Ag) alloys. Metallurgical and Materials Transactions A 26.7 (1995): 1659–1671.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2018

Authors and Affiliations

  • Katrin Mester
    • 1
  • Baptiste Rouxel
    • 1
  • Timothy Langan
    • 1
  • Justin Lamb
    • 1
  • Matthew Barnett
    • 1
  • Thomas Dorin
    • 1
  1. 1.Institute for Frontier MaterialsDeakin UniversityWaurn PondsAustralia

Personalised recommendations