Advertisement

Experimental-Numerical Validation Framework for Micromechanical Simulations

  • Ante Buljac
  • Modesar Shakoor
  • Jan Neggers
  • Marc Bernacki
  • Pierre-Olivier Bouchard
  • Lukas Helfen
  • Thilo F. Morgeneyer
  • François Hild
Chapter
Part of the Lecture Notes in Applied and Computational Mechanics book series (LNACM, volume 86)

Abstract

A combined experimental-numerical framework is presented in order to validate computations at the microscale. It is illustrated for a flat specimen with two holes, which is made of cast iron and imaged via in situ synchrotron laminography at micrometer resolution during a tensile test. The region in the reconstructed volume between the two holes is analyzed via Digital Volume Correlation (DVC) to measure displacement fields. Finite Element (FE) simulations, whose mesh is made consistent with the studied material microstructure, are driven by measured Dirichlet boundary conditions. Damage levels and gray level residuals for DVC measurements and FE simulations are assessed for validation purposes.

Notes

Acknowledgements

This work was performed within the COMINSIDE project funded by the French Agence Nationale de la Recherche (ANR-14-CE07-0034-02 grant). We also acknowledge the European Synchrotron Radiation Facility for provision of beamtime at beamline ID15, experiment ME 1366. It is also a pleasure to acknowledge the support of BPI France (“DICCIT” project), and of the Carnot M.I.N.E.S institute (“CORTEX” project). M. Kuna and L. Zybell from IMFD, TU Freiberg, are thanked for materials supply and machining as well as for scientific discussions.

References

  1. 1.
    Kachanov, L.: Bull. SSR Acad. Sci. Division of Technical Sciences (in Russian) 8, 26 (1958)Google Scholar
  2. 2.
    Rabotnov, Y.: On the Equations of State for Creep, pp. 307–315. McMillan, New York, USA (1963)Google Scholar
  3. 3.
    Lemaitre, J.: A Course on Damage Mechanics. Springer-Verlag, Berlin (1992)Google Scholar
  4. 4.
    Cao, T.S., Maire, E., Verdu, C., Bobadilla, C., Lasne, P., Montmitonnet, P., Bouchard, P.O.: Comput. Mat. Sci. 84, 175 (2014)Google Scholar
  5. 5.
    Cao, T.S., Bobadilla, C., Montmitonnet, P., Bouchard, P.O.: J. Mat. Proc. Technol. 216, 385 (2015)Google Scholar
  6. 6.
    Gurson, A.: ASME J. Eng. Mat. Technol. 99, 2 (1977)Google Scholar
  7. 7.
    Needleman, A., Tvergaard, V.: J. Mech. Phys. Solids 32(6), 461 (1984)Google Scholar
  8. 8.
    Geers, M., De Borst, R., Peijs, T.: Compos. Sci. Tech. 59, 1569 (1999)Google Scholar
  9. 9.
    Claire, D., Hild, F., Roux, S.: C. R. Mécanique 330, 729 (2002)Google Scholar
  10. 10.
    Roux, S., Hild, F.: Exp. Mech. 48(4), 495 (2008)Google Scholar
  11. 11.
    Babout, L., Bréchet, Y., Maire, E., Fougères, R.: Acta Mat. 52(15), 4517 (2004)Google Scholar
  12. 12.
    Bouchard, P.O., Bourgeon, L., Lachapèle, H., Maire, E., Verdu, C., Forestier, R., Logé, R.: Mat. Sci. Eng. A 496(1–2), 223 (2008)Google Scholar
  13. 13.
    Ueda, T., Helfen, L., Morgeneyer, T.F.: Acta Mat. 78, 254 (2014)Google Scholar
  14. 14.
    Hannard, F., Pardoen, T., Maire, E., Le Bourlot, C., Mokso, R., Simar, A.: Acta Mat. 103, 558 (2016)Google Scholar
  15. 15.
    Morgeneyer, T., Taillandier-Thomas, T., Buljac, A., Helfen, L., Hild, F.: J. Mech. Phys. Solids 96, 550 (2016)Google Scholar
  16. 16.
    Morgeneyer, T., Besson, J., Proudhon, H., Starink, M., Sinclair, I.: Acta Mat. 57(13), 3902 (2009)Google Scholar
  17. 17.
    Tang, S., Kopacz, A.M., Chan O’Keeffe, S., Olson, G.B., Liu, W.K.: J. Mech. Phys. Solids 61(11), 2108 (2013)Google Scholar
  18. 18.
    Dong, M.J., Prioul, C., François, D.: Metall. Mat. Trans. A 28(11), 2245 (1997)Google Scholar
  19. 19.
    Hütter, G., Zybell, L., Kuna, M.: Eng. Fract. Mech. 144, 118 (2015)Google Scholar
  20. 20.
    Tomičević, Z., Kodvanj, J., Hild, F.: Eur. J. Mech. A/Solids 59, 140 (2016)Google Scholar
  21. 21.
    Zhang, K., Bai, J., François, D.: Int. J. Solids Struct. 36(23), 3407 (1999)Google Scholar
  22. 22.
    Bonora, N., Ruggiero, A.: Int. J. Solids Struct. 42(5–6), 1401 (2005)Google Scholar
  23. 23.
    Hütter, G., Zybell, L., Mühlich, U., Kuna, M.: Comput. Mat. Sci. 80, 61 (2013)Google Scholar
  24. 24.
    Hütter, G., Zybell, L., Kuna, M.: Int. J. Solids Struct. 51(3–4), 839 (2014)Google Scholar
  25. 25.
    Buljac, A., Shakoor, M., Neggers, J., Helfen, L., Bernacki, M., Bouchard, P.O., Morgeneyer, T.F., Hild, F.: Comput. Mech. 59(3), 419 (2017)Google Scholar
  26. 26.
    Helfen, L., Myagotin, A., Pernot, P., DiMichiel, M., Mikulík, P., Berthold, A., Baumbach, T.: Nucl. Inst. Meth. Phys. Res. B 563, 163 (2006)Google Scholar
  27. 27.
    Helfen, L., Morgeneyer, T., Xu, F., Mavrogordato, M., Sinclair, I., Schillinger, B., Baumbach, T.: Int. J. Mat. Res. 2012(2), 170 (2012)Google Scholar
  28. 28.
    Maurel, V., Helfen, L., N’Guyen, F., Köster, A., Di Michiel, M., Baumbach, T., Morgeneyer, T.: Scripta Mat. 66, 471 (2012)Google Scholar
  29. 29.
    Bull, D., Spearing, S., Sinclair, I., Helfen, L.: Compos. Part A 52, 62 (2013)Google Scholar
  30. 30.
    Reischig, P., Helfen, L., Wallert, A., Baumbach, T., Dik, J.: Appl. Phys. A 111, 983 (2013)Google Scholar
  31. 31.
    Bay, B., Smith, T., Fyhrie, D., Saad, M.: Exp. Mech. 39, 217 (1999)Google Scholar
  32. 32.
    Smith, T., Bay, B., Rashid, M.: Exp. Mech. 42(3), 272 (2002)Google Scholar
  33. 33.
    Bornert, M., Chaix, J., Doumalin, P., Dupré, J., Fournel, T., Jeulin, D., Maire, E., Moreaud, M., Moulinec, H.: Inst. Mes. Métrol. 4, 43 (2004)Google Scholar
  34. 34.
    Verhulp, E., van Rietbergen, B., Huiskes, R.: J. Biomech. 37(9), 1313 (2004)Google Scholar
  35. 35.
    Roux, S., Hild, F., Viot, P., Bernard, D.: Comp. Part A 39(8), 1253 (2008)Google Scholar
  36. 36.
    Rannou, J., Limodin, N., Réthoré, J., Gravouil, A., Ludwig, W., Baïetto, M., Buffière, J., Combescure, A., Hild, F., Roux, S.: Comp. Meth. Appl. Mech. Eng. 199, 1307 (2010)Google Scholar
  37. 37.
    Bouterf, A., Roux, S., Hild, F., Adrien, J., Maire, E.: Strain 50(5), 444 (2014)Google Scholar
  38. 38.
    Hild, F., Bouterf, A., Chamoin, L., Mathieu, F., Neggers, J., Pled, F., Tomičević, Z., Roux, S.: Adv. Mech. Simul. Eng. Sci. 3(1), 1 (2016)Google Scholar
  39. 39.
    Zhang, Y., Bajaj, C., Sohn, B.S.: Comput. Meth. Appl. Mech. Eng. 194(48–49), 5083 (2005)Google Scholar
  40. 40.
    Young, P.G., Beresford-West, T.B.H., Coward, S.R.L., Notarberardino, B., Walker, B., Abdul-Aziz, A.: Phil. Trans. A 366(1878), 3155 (2008)Google Scholar
  41. 41.
    Osher, S., Sethian, J.A.: J. Comput. Phys. 79(1), 12 (1988)Google Scholar
  42. 42.
    Kimmel, R., Shaked, D., Kiryati, N., Bruckstein, A.M.: Comput. Vis. Image Underst. 62(3), 382 (1995)Google Scholar
  43. 43.
    Sukumar, N., Chopp, D., Moës, N., Belytschko, T.: Comput. Meth. Appl. Mech. Eng. 190(46–47), 6183 (2001)Google Scholar
  44. 44.
    Roux, E., Bernacki, M., Bouchard, P.O.: Comput. Mat. Sci. 68, 32 (2013)Google Scholar
  45. 45.
    Quan, D.L., Toulorge, T., Marchandise, E., Remacle, J.F., Bricteux, G.: Comp. Meth. Appl. Mech. Eng. 268, 65 (2014)Google Scholar
  46. 46.
    Shakoor, M., Scholtes, B., Bouchard, P.O., Bernacki, M.: Appl. Math. Model. 39(23–24), 7291 (2015)Google Scholar
  47. 47.
    Shakoor, M., Bouchard, P.O., Bernacki, M.: Int. J. Num. Meth. Eng. 109(4), 555 (2017)Google Scholar
  48. 48.
    Weck, A., Wilkinson, D.: Acta Materialia 56(8), 1774 (2008)Google Scholar
  49. 49.
    Myagotin, A., Voropaev, A., Helfen, L., Hänschke, D., Baumbach, T., Trans, I.E.E.E.: Image Process. 22(12), 5348 (2013)Google Scholar
  50. 50.
    Vogelgesang, M., Farago, T., Morgeneyer, T.F., Helfen, L., dos Santos Rolo, T., Myagotin, A., Baumbach, T.: J. Synchrotron Rad. 23, 1254 (2016)Google Scholar
  51. 51.
    Besnard, G., Hild, F., Roux, S.: Exp. Mech. 46, 789 (2006)Google Scholar
  52. 52.
    Hild, F., Roux, S.: Exp. Mech. 52(9), 1503 (2012)Google Scholar
  53. 53.
    Xu, F., Helfen, L., Baumbach, T., Suhonen, H.: Optics Exp. 20, 794 (2012)Google Scholar
  54. 54.
    Morgeneyer, T., Helfen, L., Mubarak, H., Hild, F.: Exp. Mech. 53(4), 543 (2013)Google Scholar
  55. 55.
    Limodin, N., Rthor, J., Adrien, J., Buffire, J., Hild, F., Roux, S.: Exp. Mech. 51(6), 959 (2011)Google Scholar
  56. 56.
    Leclerc, H., Périé, J., Hild, F., Roux, S.: Mech. Indust. 13, 361 (2012)Google Scholar
  57. 57.
    Roux, E., Shakoor, M., Bernacki, M., Bouchard, P.O.: Model. Simul. Mat. Sci. Eng. 22(7), 075001 (2014)Google Scholar
  58. 58.
    Shakoor, M., Bernacki, M., Bouchard, P.O.: Eng. Fract. Mech. 147, 398 (2015)Google Scholar
  59. 59.
    Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., Tinevez, J.Y., White, D.J., Hartenstein, V., Eliceiri, K., Tomancak, P., Cardona, A.: Nature Meth. 9(7), 676 (2012)Google Scholar
  60. 60.
    Schneider, C.A., Rasband, W.S., Eliceiri, K.W.: Nature Meth. 9(7), 671 (2012)Google Scholar
  61. 61.
    Boffi, D., Brezzi, F., Demkowicz, L.F., Durán, R.G., Falk, R.S., Fortin, M.: Mixed Finite Elements, Compatibility Conditions, and Applications. Lecture Notes in Mathematics, vol. 1939. Springer, Berlin (2008)Google Scholar
  62. 62.
    Wagoner, R.H., Chenot, J.L.: Metal Forming Analysis. Cambridge University Press (2001)Google Scholar
  63. 63.
    Leclerc, H., Neggers, J., Mathieu, F., Roux, S., Hild, F.: Correli 3.0. IDDN.FR.001.520008.000.S.P.2015.000.31500, Agence pour la Protection des Programmes, Paris, France (2015)Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.LMT, ENS Paris-Saclay/CNRS/Université Paris-SaclayCachan cedexFrance
  2. 2.MINES ParisTechPSL Research University, Centre des Matériaux, CNRS UMR 7633EvryFrance
  3. 3.MINES ParisTechPSL - Research University, CEMEF - Centre de mise en forme des matériaux, CNRS UMR 7635Sophia Antipolis CedexFrance
  4. 4.ANKA/Institute for Photon Science and Synchrotron Radiation Karlsruhe Institute of Technology (KIT)KarlsruheGermany
  5. 5.European Synchrotron Radiation Facility (ESRF)GrenobleFrance

Personalised recommendations