Advertisement

3D Printing in Neurosurgery

  • Vicknes WaranEmail author
  • Vairavan Narayanan
  • Ravindran Karrupiah
  • Chun Yoong Cham
Chapter

Abstract

3D printing is generating interest in many fields, for example, design, engineering, and medicine. The surgical fields in medicine have taken the lead in progress, especially in orthopedics, maxillofacial reconstruction, and neurosurgery (Eltorai et al. 2015; Yang et al. 2015; Mavili et al. 2007; Müller et al. 2003; McGurk et al. 1997). In particular, 3D printing has contributed greatly to the development of personalized medicine. 3D printing has emerged to play a unique role in the fabrication of personalized implants as well as in surgical planning and simulation, assisting in the consent process, and providing an educational tool for medical students and residents (Mavili et al. 2007; Müller et al. 2003; McGurk et al. 1997; Liew et al. 2015; Jones et al. 2016; Naftulin et al. 2015; Rengier et al. 2010; Webb 2000). This is based on the fact that reasonably complex 3D-printed models can be created in a short period of time with a good cost efficiency.

Supplementary material

Video 1

Navigated craniotomy for cerebral glioma (WMV 38,037 kb)

Video 2

Navigated endoscopic third ventriculostomy and pineal biopsy (MP4 34,179 kb)

Video 3

Anterior and posterior decompression of cervical spine with instrumentation (MP4 121,781 kb)

References

  1. Caro-Osorio E, De la Garza-Ramos R, Martínez-Sánchez SR, Olazarán-Salinas F. Cranioplasty with polymethylmethacrylate prostheses fabricated by hand using original bone flaps: technical note and surgical outcomes. Surg Neurol Int. 2013;4:136.CrossRefPubMedPubMedCentralGoogle Scholar
  2. Christensen A, Rybicki FJ. Maintaining safety and efficacy for 3D printing in medicine. 3D Print Med. 2017;3:1.CrossRefGoogle Scholar
  3. D’Urso PS, Earwaker WJ, Barker TM, Redmond MJ, Thompson RG, Effeney DJ, Tomlinson FH. Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg. 2000;53(3):200–4.CrossRefPubMedGoogle Scholar
  4. Dean D, Min KJ, Bond A. Computer aided design of large-format prefabricated cranial plates. J Craniofac Surg. 2003;14(6):819–32.CrossRefPubMedGoogle Scholar
  5. Eltorai AE, Nguyen E, Daniels AH. Three-dimensional printing in orthopedic surgery. Orthopedics. 2015;38(11):684–7.CrossRefPubMedGoogle Scholar
  6. Fathi AR, Marbacher S, Lukes A. Cost-effective patient-specific intraoperative molded cranioplasty. J Craniofac Surg. 2008;19(3):777–81.CrossRefPubMedGoogle Scholar
  7. Gateno J, Teichgraeber JF, Xia JJ. Three-dimensional surgical planning for maxillary and midface distraction osteogenesis. J Craniofac Surg. 2003;14(6):833–9.CrossRefPubMedGoogle Scholar
  8. Gooch MR, Gin GE, Kenning TJ, German JW. Complications of cranioplasty following decompressive craniectomy: analysis of 62 cases. Neurosurg Focus. 2009;26(6):e9.CrossRefPubMedGoogle Scholar
  9. Grossman N, Shemesh-Jan HS, Merkin V, Gideon M, Cohen A. Deep-freeze preservation of cranial bones for future cranioplasty: nine years of experience in Soroka University Medical Center. Cell Tissue Bank. 2007;8(3):243–6.CrossRefPubMedGoogle Scholar
  10. Ionita CN, Mokin M, Varble N, Bednarek DR, Xiang J, Snyder KV, Siddiqui AH, Levy EI, Meng H, Rudin S. Challenges and limitations of patient-specific vascular phantom fabrication using 3D Polyjet printing. Proc SPIE Int Soc Opt Eng. 2014;9038:90380M.PubMedPubMedCentralGoogle Scholar
  11. Iwama T, Yamada J, Imai S, Shinoda J, Funakoshi T, Sakai N. The use of frozen autogenous bone flaps in delayed cranioplasty revisited. Neurosurgery. 2003;52(3):591–6. discussion 595–6.CrossRefPubMedGoogle Scholar
  12. Jones DB, Sung R, Weinberg C, Korelitz T, Andrews R. Three-dimensional modeling may improve surgical education and clinical practice. Surg Innov. 2016;23(2):189–95.CrossRefPubMedGoogle Scholar
  13. Klammert U, Gbureck U, Vorndran E, Rödiger J, Meyer-Marcotty P. Kübler AC.3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects. J Craniomaxillofac Surg. 2010;38(8):565–70.CrossRefPubMedGoogle Scholar
  14. Kondo K, Harada N, Masuda H, Sugo N, Terazono S, Okonogi S, Sakaeyama Y, Fuchinoue Y, Ando S, Fukushima D, Nomoto J, Nemoto M. A neurosurgical simulation of skull base tumors using a 3D printed rapid prototyping model containing mesh structures. Acta Neurochir. 2016;158:1213.CrossRefPubMedGoogle Scholar
  15. Kozakiewicz M, Elgalal M, Loba P, Komuński P, Arkuszewski P, Broniarczyk-Loba A, Stefańczyk L. Clinical application of 3D pre-bent titanium implants for orbital floor fractures. J Craniomaxillofac Surg. 2009;37(4):229–34.CrossRefPubMedGoogle Scholar
  16. Li J, Li P, Lu H, Shen L, Tian W, Long J, Tang W. Digital design and individually fabricated titanium implants for the reconstruction of traumatic zygomatico-orbital defects. J Craniofac Surg. 2013;24(2):363–8.CrossRefPubMedGoogle Scholar
  17. Liew Y, Beveridge E, Demetriades AK, Hughes MA. 3D printing of patient-specific anatomy: a tool to improve patient consent and enhance imaging interpretation by trainees. Br J Neurosurg. 2015;29(5):712–4. doi: 10.3109/02688697.2015.1026799.CrossRefPubMedGoogle Scholar
  18. Marbacher S, Andereggen L, Erhardt S, Fathi AR, Fandino J, Raabe A, Beck J. Intraoperative template-molded bone flap reconstruction for patient-specific cranioplasty. Neurosurg Rev. 2012;35(4):527–35.CrossRefPubMedGoogle Scholar
  19. Martelli N, Serrano C, van den Brink H, Pineau J, Prognon P, Borget I, El Batti S. Advantages and disadvantages of 3-dimensional printing in surgery: a systematic review. Surgery. 2016;159:1485.CrossRefPubMedGoogle Scholar
  20. Mavili ME, Canter HI, Saglam-Aydinatay B, Kamaci S, Kocadereli I. Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery. J Craniofac Surg. 2007;18(4):740–7.CrossRefPubMedGoogle Scholar
  21. McGurk M, Amis AA, Potamianos P, Goodger NM. Rapid prototyping techniques for anatomical modelling in medicine. Ann R Coll Surg Engl. 1997;79(3):169–74.PubMedPubMedCentralGoogle Scholar
  22. Müller A, Krishnan KG, Uhl E, Mast G. The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery. J Craniofac Surg. 2003;14(6):899–914.CrossRefPubMedGoogle Scholar
  23. Naftulin JS, Kimchi EY, Cash SS. Streamlined, inexpensive 3D printing of the brain and skull. PLoS One. 2015;10(8):e0136198.CrossRefPubMedPubMedCentralGoogle Scholar
  24. Narayanan V, Narayanan P, Rajagopalan R, Karuppiah R, Rahman ZA, Wormald PJ, Van Hasselt CA, Waran V. Endoscopic skull base training using 3D printed models with pre-existing pathology. Eur Arch Otorhinolaryngol. 2015;272(3):753–7.CrossRefPubMedGoogle Scholar
  25. Oyama K, Ditzel Filho LF, Muto J, de Souza DG, Gun R, Otto BA, Carrau RL, Prevedello DM. Endoscopic endonasal cranial base surgery simulation using an artificial cranial base model created by selective laser sintering. Neurosurg Rev. 2015;38(1):171–178. discussion 178. doi: 10.1007/s10143-014-0580-4.CrossRefPubMedGoogle Scholar
  26. Pacione D, Tanweer O, Berman P, Harter DH. The utility of a multimaterial 3D printed model for surgical planning of complex deformity of the skull base and craniovertebral junction. J Neurosurg. 2016;125:1194.CrossRefPubMedGoogle Scholar
  27. Ploch CC, Mansi CS, Jayamohan J, Kuhl E. Using 3D printing to create personalized brain models for neurosurgical training and preoperative planning. World Neurosurg. 2016;90:668. doi: 10.1016/j.wneu.2016.02.081. pii: S1878-8750(16)00326-0.CrossRefPubMedGoogle Scholar
  28. Poukens J, Haex J, Riediger D. The use of rapid prototyping in the preoperative planning of distraction osteogenesis of the cranio-maxillofacial skeleton. Comput Aided Surg. 2003;8(3):146–54.CrossRefPubMedGoogle Scholar
  29. Rengier F, Mehndiratta A, von Tengg-Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor HU, Giesel FL. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 2010;5(4):335–41.CrossRefPubMedGoogle Scholar
  30. Rosenthal G, Ng I, Moscovici S, Lee KK, Lay T, Martin C, Manley GT. Polyetheretherketone implants for the repair of large cranial defects: a 3-center experience. Neurosurgery. 2014;75(5):523–9.CrossRefPubMedGoogle Scholar
  31. Rotaru H, Stan H, Florian IS, Schumacher R, Park YT, Kim SG, Chezan H, Balc N, Baciut M. Cranioplasty with custom-made implants: analyzing the cases of 10 patients. J Oral Maxillofac Surg. 2012;70(2):e169–76.CrossRefPubMedGoogle Scholar
  32. Ryan JR, Almefty K, Nakaji P, Frakes DH. Cerebral aneurysm clipping surgery simulation using patient-specific 3D printing and silicone casting. World Neurosurg. 2016;88:175. doi: 10.1016/j.wneu.2015.12.102. pii: S1878-8750(16)00112-1.CrossRefPubMedGoogle Scholar
  33. Shah AM, Jung H, Skirboll S. Materials used in cranioplasty: a history and analysis. Neurosurg Focus. 2014;36(4):E19.CrossRefPubMedGoogle Scholar
  34. Shoakazemi A, Flannery T, McConnell RS. Long-term outcome of subcutaneously preserved autologous cranioplasty. Neurosurgery. 2009;65(3):505–10.CrossRefPubMedGoogle Scholar
  35. Solaro P, Pierangeli E, Pizzoni C, Boffi P, Scalese G. From computerized tomography data processing to rapid manufacturing of custom-made prostheses for cranioplasty. Case report. J Neurosurg Sci. 2008;52(4):113–6. discussion 116.PubMedGoogle Scholar
  36. Tai BL, Rooney D, Stephenson F, Liao PS, Sagher O, Shih AJ, Savastano LE. Development of a 3D-printed external ventricular drain placement simulator: technical note. J Neurosurg. 2015;123(4):1070–6.CrossRefPubMedGoogle Scholar
  37. Thawani JP, Pisapia JM, Singh N, Petrov D, Schuster JM, Hurst RW, Zager EL, Pukenas BA. 3D-printed modeling of an arteriovenous malformation including blood flow. World Neurosurg. 2016;90:675. pii: S1878-8750(16)30022-5.CrossRefPubMedGoogle Scholar
  38. Waran V, Menon R, Pancharatnam D, Rathinam AK, Balakrishnan YK, Tung TS, Raman R, Prepageran N, Chandran H, Rahman ZA. The creation and verification of cranial models using three-dimensional rapid prototyping technology in field of transnasal sphenoid endoscopy. Am J Rhinol Allergy. 2012;26(5):e132.CrossRefPubMedGoogle Scholar
  39. Waran V, Narayanan V, Karuppiah R, Owen SL, Aziz T. Utility of multimaterial 3D printers in creating models with pathological entities to enhance the training experience of neurosurgeons. J Neurosurg. 2014a;120(2):489–92.CrossRefPubMedGoogle Scholar
  40. Waran V, Narayanan V, Karuppiah R, Pancharatnam D, Chandran H, Raman R, Rahman ZA, Owen SL, Aziz TZ. Injecting realism in surgical training-initial simulation experience with custom 3D models. J Surg Educ. 2014b;71(2):193–7.CrossRefPubMedGoogle Scholar
  41. Waran V, Narayanan V, Karuppiah R, Thambynayagam HC, Muthusamy KA, Rahman ZA, Kirollos RW. Neurosurgical endoscopic training via a realistic 3-dimensional model with pathology. Simul Healthc. 2015;10(1):43–8.CrossRefPubMedGoogle Scholar
  42. Webb PA. A review of rapid prototyping (RP) techniques in the medical and biomedical sector. J Med Eng Technol. 2000;24(4):149–53.CrossRefPubMedGoogle Scholar
  43. Winder J, Cooke RS, Gray J, Fannin T, Fegan T. Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. J Med Eng Technol. 1999;23(1):26–8.CrossRefPubMedGoogle Scholar
  44. Wurm G, Lehner M, Tomancok B, Kleiser R, Nussbaumer K. Cerebrovascular biomodeling for aneurysm surgery: simulation-based training by means of rapid prototyping technologies. Surg Innov. 2011;18(3):294–306.CrossRefPubMedGoogle Scholar
  45. Yang M, Li C, Li Y, Zhao Y, Wei X, Zhang G, Fan J, Ni H, Chen Z, Bai Y, Li M. Application of 3D rapid prototyping technology in posterior corrective surgery for Lenke 1 adolescent idiopathic scoliosis patients. Medicine (Baltimore). 2015;94(8):e582.CrossRefGoogle Scholar
  46. Zhang Z, Zhang R, Song Z. Skull defect reconstruction based on a new hybrid level set. Biomed Mater Eng. 2014;24(6):3343–51.PubMedGoogle Scholar
  47. Zheng YX, Yu DF, Zhao JG, Wu YL, Zheng B. 3D printout models vs. 3D-rendered images: which is better for preoperative planning? J Surg Educ. 2016;73(3):518–23.CrossRefPubMedGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  • Vicknes Waran
    • 1
    • 2
    • 3
    Email author
  • Vairavan Narayanan
    • 3
  • Ravindran Karrupiah
    • 3
  • Chun Yoong Cham
    • 3
  1. 1.Department of SurgeryUniversity of MalayaKuala LumpurMalaysia
  2. 2.University of Malaya Specialist CentreKuala LumpurMalaysia
  3. 3.Centre for Biomedical and Technology Integration (CBMTI)Kuala LumpurMalaysia

Personalised recommendations