Stress Distribution in Elastic Plane with a Semi-infinite Notch

Chapter
First Online:

Abstract

The second chapter presents analysis of stress fields in elastic plane with a semi-infinite notch under conditions of plane stress state or plane strain state. Well-known boundary value problem solutions for eigenvalues of a wedge in the plane elasticity theory are considered at first. Then the same solutions are constructed for the semi-infinite rounded V-shaped notch. Based on these solutions, the relationship between stress concentration factor and stress intensity factor in elastic bodies with rounded or sharp V-shaped notches had been established.

This is a preview of subscription content, log in to check access.

References

  1. 1.
    Akin, J.E.: The generation of elements with singularities. Int. J. Numer. Methods Eng. 10, 1249–1259 (1976)MathSciNetMATHCrossRefGoogle Scholar
  2. 2.
    Aleksandrov, A.Y., Zinov’ev, B.M., Kurshin, L.M.: One numerical method of solving problems of elasticity with allowance for singularities of the stresses state near corner points and lines. Mech. Solids 15(3), 39–49 (1980)MathSciNetGoogle Scholar
  3. 3.
    Aleksanyan, R.K.: On a class of solutions of the equations of the plane theory of elasticity of an anisotropic body. Rep. Acad. Sci. Armen. SSR 61(4), 219–224 (1975)Google Scholar
  4. 4.
    Aleksanyan, R.K., Gevorkyan, S.H.: On the first fundamental problem of plane theory of elasticity for anisotropic wedge. Proc. Natl. Acad. Sci. Armen. Mech. 53(2), 10–15 (2000)Google Scholar
  5. 5.
    Atkinson, C., Bourne, J.P.: Stress singularities in angular sectors of viscoelastic media. Int. J. Eng. Sci. 28(7), 615–630 (1990)MathSciNetMATHCrossRefGoogle Scholar
  6. 6.
    Atzori, B., Lazzarin, P.: Notch sensitivity and defect sensitivity under fatigue loading: two sides of the same medal. Int. J. Fract. 107, L3–L8 (2000)Google Scholar
  7. 7.
    Ayatollahi, M.R., Nejati, M.: Determination of NSIFs and coefficients of higher order terms for sharp notches using finite element method. Int. J. Mech. Sci. 53(3), 164–177 (2011)CrossRefGoogle Scholar
  8. 8.
    Banks-Sills, L., Sherer, A.: A conservative integral for determining stress intensity factors of a bimaterial notch. Int. J. Fract. 115(1), 1–25 (2002)CrossRefGoogle Scholar
  9. 9.
    Banks-Sills, L., Yang, Y.Y., Munz, D.: An influence function for stress intensity factors of bimaterial notched bodies. Int. J. Fract. 85(4), 333–350 (1997)CrossRefGoogle Scholar
  10. 10.
    Bansal, A., Kumosa, M.: Analysis of double edge-cracked iosipescu specimens under biaxial loads. Eng. Fract. Mech. 59(1), 89–100 (1998)CrossRefGoogle Scholar
  11. 11.
    Barber, J.R.: Elasticity, 2nd edn. Kluwer Academic Publishers, New York (2002)MATHGoogle Scholar
  12. 12.
    Barone, M.R., Robinson, A.R.: Determination of elastic stresses at notches and cornes by integral equations. Int. J. Solids Struct. 8, 1319–1338 (1972)MATHCrossRefGoogle Scholar
  13. 13.
    Belubekyan, V.M., Belubekyan, M.V., Terzyan, S.A.: Stress state in the vicinity of the elastic wedge vertex. Proc. Natl. Acad. Sci. Armen. Mech. 54(2), 8–21 (2001)Google Scholar
  14. 14.
    Benthem, J.: On the stress distribution in anisotropic infinite wedges. Q. Appl. Math. 21(3), 189–198 (1963)MathSciNetMATHGoogle Scholar
  15. 15.
    Benthem, J.P.: Stresses in the region of rounded corners. Int. J. Solids Struct. 23(2), 239–252 (1987)CrossRefGoogle Scholar
  16. 16.
    Berto, F., Lazzarin, P., Matvienko, Y.G.: J-integral evaluation for U- and V-blunt notches under mode I loading and materials obeying a power hardening law. Int. J. Fract. 146(1), 33–51 (2007)MATHCrossRefGoogle Scholar
  17. 17.
    Blanco, C., Martinez-Esnaola, J.M., Atkinson, C.: Analysis of sharp angular notches in anisotropic materials. Int. J. Fract. 93(1–4), 373–386 (1998)CrossRefGoogle Scholar
  18. 18.
    Blinowski, A., Rogaczewski, J.: On the order of singularity at V-shaped notches in anisotropic bodies. Arch. Mech. 52(6), 1001–1010 (2000)MATHGoogle Scholar
  19. 19.
    Blinowski, A., Wieromiej-Ostrowska, A.: On the singularities at the tips of orthotropic wedges in plane elasticity - I. Technol. Sci. 8, 107–124 (2005)Google Scholar
  20. 20.
    Bogy, D.B.: Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. J. Appl. Mech. 35, 460–466 (1968)MATHCrossRefGoogle Scholar
  21. 21.
    Bogy, D.B.: Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions. J. Appl. Mech. 38, 377–386 (1968)CrossRefGoogle Scholar
  22. 22.
    Bogy, D.B.: The plane solution for anisotropic elastic wedges under normal and shear loading. J. Appl. Mech. 39, 1103–1109 (1972)MATHCrossRefGoogle Scholar
  23. 23.
    Bogy, D.B., Wang, K.C.: Stress singularities at interface corners in bonded dissimilar isotropic elastic materials. Int. J. Solids Struct. 7(8), 993–1005 (1971)MATHCrossRefGoogle Scholar
  24. 24.
    Bourne, J.P., Atkinson, C.: Stress singularities in viscoelastic media 2. Plane-strain stress singularities at corners. IMA J. Appl. Math. 44(2), 163–180 (1990)MathSciNetMATHCrossRefGoogle Scholar
  25. 25.
    Brahtz, A.H.A.: Stresses at two-dimensional corners for various force distributions. Ph.D. thesis, California Institute of Technology, Pasadena California (1932)Google Scholar
  26. 26.
    Brahtz, J.H.A.: Stress distribution in a reentrant corner. Trans. ASME 55, 31–37 (1933)Google Scholar
  27. 27.
    Brahtz, J.H.A.: Stress distribution in wedges with arbitrary boundary forces. J. Appl. Phys. 4(2), 56–65 (1933)MATHGoogle Scholar
  28. 28.
    Broberg, K.B.: Cracks and Fracture. Academic Press, San Diego (1999)Google Scholar
  29. 29.
    Carpenter, W.C.: Calculation of fracture parameters for a general corner. Int. J. Fract. 24(1), 45–58 (1984)CrossRefGoogle Scholar
  30. 30.
    Carpenter, W.C.: A collocation procedure for determining fracture mechanics parameters at a corner. Int. J. Fract. 24(4), 255–266 (1984)MathSciNetCrossRefGoogle Scholar
  31. 31.
    Carpenter, W.C.: Mode I and mode II stress intensities for plates with cracks of finite opening. Int. J. Fract. 26(3), 201–214 (1984)MathSciNetCrossRefGoogle Scholar
  32. 32.
    Carpenter, W.C.: The eigenvector solution for a general corner or finite opening crack with further studies on the collocation procedure. Int. J. Fract. 27, 63–73 (1985)CrossRefGoogle Scholar
  33. 33.
    Carpenter, W.C.: Comments on the eigenvalue formulation of problems with cracks, V-notched cracks, and corners. Int. J. Fract. 68(1), 75–87 (1994)MathSciNetCrossRefGoogle Scholar
  34. 34.
    Carpenter, W.C., Byers, C.: Path independent integral for computing stress intensities for V-notched cracks in a bi-material. Int. J. Fract. 35(4), 245–268 (1987)CrossRefGoogle Scholar
  35. 35.
    Carpinteri, A., Paggi, M., Pugno, N.: Numerical evaluation of generalized stress intensity factors in multi-layered composites. Int. J. Solids Struct. 43(3–4), 627–641 (2006)MATHCrossRefGoogle Scholar
  36. 36.
    Cartwright, D.J., Rooke, D.P.: Evaluation of stress intensity factors. J. Strain Anal. 10(4), 217–224 (1975)CrossRefGoogle Scholar
  37. 37.
    Chang, J.H., Wu, W.H.: Calculation of mixed-mode stress filed at a sharp notch tip using \(M_{1\varepsilon }\)-integral. Comput. Mech. 31, 419–427 (2003)MATHCrossRefGoogle Scholar
  38. 38.
    Chao, Y.J., Yang, S.: Singularities at the apex of a sharp V-notch in a linear strain hardening material. Int. J. Fract. 57(1), 47–60 (1992)CrossRefGoogle Scholar
  39. 39.
    Chen, D., Ushijima, K.: Plastic stress singularity near the tip of a V-notch. Int. J. Fract. 106(2), 117–134 (2000)CrossRefGoogle Scholar
  40. 40.
    Chen, D.H., Nisitani, H.: Mode I and II singular stress fields near a corner of jointed dissimilar materials. JSME Int. J. 35, 392–398 (1992)Google Scholar
  41. 41.
    Chen, D.H., Nisitani, H.: Singular stress field near the corner of jointed dissimilar materials. J. Appl. Mech. 60(3), 607–613 (1993)Google Scholar
  42. 42.
    Chen, D.H., Nisitani, H.: Body force method. Int. J. Fract. 86(1), 161–189 (1997)MATHCrossRefGoogle Scholar
  43. 43.
    Chen, Y.H., Lu, T.J.: On the path dependence of the J-integral in notch problems. Int. J. Solids Struct. 41, 607–618 (2004)MATHCrossRefGoogle Scholar
  44. 44.
    Cheng, C., Niu, Z., Zhou, H., Recho, N.: Evaluation of multiple stress singularity orders of a V-notch by the boundary element method. Eng. Anal. Bound. Elem. 33(10), 1145–1151 (2009)MathSciNetMATHCrossRefGoogle Scholar
  45. 45.
    Cherepanov, G.P.: Mekhanika khrupkogo razrusheniya (Mechanics of brittle fracture). Nauka, Moscow (1974)Google Scholar
  46. 46.
    Cherepanov, G.P.: Mechanics of Brittle Fracture. McGraw Hill, New York (1979)MATHGoogle Scholar
  47. 47.
    Chiang, C.R.: Stress field around a rounded crack tip. J. Appl. Mech. 58(3), 834–836 (1991)CrossRefGoogle Scholar
  48. 48.
    Chiang, C.R.: The stress field for a blunt crack in an anisotropic material. Int. J. Fract. 68(2), R41–R46 (1994)CrossRefGoogle Scholar
  49. 49.
    Cho, S.B., Kim, J.K.: A study on stress singularities for V-notched cracks in anisotropic and/or pseudo-isotropic dissimilar materials. Int. J. Korean Soc. Precis. Eng. 3(2), 22–32 (2002)Google Scholar
  50. 50.
    Chuang, W.Y., Sung, J.C., Chung, W.G.: Stress singularities of two special geometries of wedges with free-mixed boundary conditions. Comput. Struct. 81(3), 167–176 (2003)MathSciNetCrossRefGoogle Scholar
  51. 51.
    Chue, C.H., Liu, C.I.: A general solution on stress singularities in an anisotropic wedge. Int. J. Solids Struct. 38(38–39), 6889–6906 (2001)MathSciNetMATHCrossRefGoogle Scholar
  52. 52.
    Chue, C.H., Liu, C.I.: Stress singularities in a bimaterial anisotropic wedge with arbitrary fiber orientation. Compos. Struct. 58(1), 49–56 (2002)CrossRefGoogle Scholar
  53. 53.
    Chue, C.H., Weng, S.M.: Stress singularities in anisotropic three-material wedges and junctions with applications. Compos. Struct. 58(4), 443–456 (2002)CrossRefGoogle Scholar
  54. 54.
    Chue, C.H., Tseng, C.H., Liu, C.I.: On stress singularities in an anisotropic wedge for various boundary conditions. Compos. Struct. 54, 87–102 (2001)CrossRefGoogle Scholar
  55. 55.
    Cormack, D.E., Rosen, D.: Gauge conditions and the analysis of singular fields with boundary integral equations. Eng. Anal. Bound. Elem. 18(1), 1–8 (1996)CrossRefGoogle Scholar
  56. 56.
    Creager, M., Paris, P.C.: Elastic field equations for blunt cracks with reference to stress corrosion cracking. Int. J. Fract. Mech. 3, 247–252 (1967)Google Scholar
  57. 57.
    De Chen, C., Chue, C.H.: Singular stresses near apex of wedge by finite element analysis. J. Chin. Inst. Eng. 26(4), 423–434 (2003)CrossRefGoogle Scholar
  58. 58.
    Della-Ventura, D., Smith, R.N.L.: Some applications of singular fields in the solution of crack problems. Int. J. Numer. Methods Eng. 42, 927–942 (1998)MATHCrossRefGoogle Scholar
  59. 59.
    Dempsey, J., Sinclair, G.: On the stress singularities in the plane elasticity of the composite wedge. J. Elast. 9(4), 373–391 (1979)MathSciNetMATHCrossRefGoogle Scholar
  60. 60.
    Dempsey, J., Sinclair, G.: On the singular behavior at the vertex of a bi-material wedge. J. Elast. 11(3), 317–327 (1981)MathSciNetMATHCrossRefGoogle Scholar
  61. 61.
    Denisyuk, I.T.: Stress singularities of anisotropic plates with angular cuts. Int. Appl. Mech. 32(1), 41–45 (1996)MATHCrossRefGoogle Scholar
  62. 62.
    Ding, S., Meekisho, L., Kumosa, M.: Analysis of stress singular fields at a bimaterial wedge corner. Eng. Fract. Mech. 49(4), 569–585 (1994)CrossRefGoogle Scholar
  63. 63.
    Dini, D., Hills, D.: The effect of a crack-tip radius on the validity of the singular solution. Proc. Inst. Mech. Eng. Part C: Mech. Eng. Sci. 218(7), 693–701 (2004)Google Scholar
  64. 64.
    Dini, D., Hills, D.: When does a notch behave like a crack? Proc. Inst. Mech. Eng. Part C: Mech. Eng. Sci. 220(1), 27–43 (2006)CrossRefGoogle Scholar
  65. 65.
    Dini, D., Hills, D.A.: Asymptotic characterization of nearly-sharp notch root stress fields. Int. J. Fract. 130, 651–666 (2004)MATHCrossRefGoogle Scholar
  66. 66.
    Dundurs, J.: Effect of elastic constants on stress in a composite under plane deformation. J. Compos. Mater. 1(3), 310–322 (1967)Google Scholar
  67. 67.
    Elliott, D., Johnston, P.R.: Error analysis for a sinh transformation used in evaluating nearly singular boundary element integrals. J. Comput. Appl. Math. 203(1), 103–124 (2007)MathSciNetMATHCrossRefGoogle Scholar
  68. 68.
    Elliott, D., Johnston, P.R.: Gauss-Legendre quadrature for the evaluation of integrals involving the Hankel function. J. Comput. Appl. Math. 211(1), 23–35 (2008)MathSciNetMATHCrossRefGoogle Scholar
  69. 69.
    Elschner, J., Stephan, E.P.: A discrete collocation method for Symm’s integral equation on curves with corners. J. Comput. Appl. Math. 75(1), 131–146 (1996)MathSciNetMATHCrossRefGoogle Scholar
  70. 70.
    Fan, Z., Long, Y.: Sub-region mixed finite element analysis of V-notched plates. Int. J. Fract. 56, 333–344 (1992)CrossRefGoogle Scholar
  71. 71.
    Fett, T.: Weight function for cracks ahead of sharp notches. Int. J. Fract. 74(1), 11–16 (1995)CrossRefGoogle Scholar
  72. 72.
    Fett, T.: Weight functions for cracks at sharp notches and notch intensity factors. Int. J. Fract. 77, R27–R33 (1996)CrossRefGoogle Scholar
  73. 73.
    Fett, T., Munz, D.: Stress intensity factors and weight functions. Advances in Fracture Mechanics. Computational Mechanics Publications Inc., Southampton (1997)Google Scholar
  74. 74.
    Filippi, S., Ciavarella, M., Lazzarin, P.: An approximate, analytical approach to the ‘HRR’-solution for sharp V-notches. Int. J. Fract. 117(3), 269–286 (2002)CrossRefGoogle Scholar
  75. 75.
    Filippi, S., Lazzarin, P., Tovo, R.: Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates. Int. J. Solids Struct. 39(17), 4543–4565 (2002)MATHCrossRefGoogle Scholar
  76. 76.
    Fukui, T.: On corner solutions by indirect BIEM. Boundary elements V. In: Proceedings of the 5th International Conference, pp. 929–938. Springer, Berlin (1983)Google Scholar
  77. 77.
    Gecit, M.R.: An integral equation approach for simultaneous solution of rectangular hole and rectangular block problems. Int. J. Eng. Sci. 21(9), 1041–1051 (1983)MathSciNetMATHCrossRefGoogle Scholar
  78. 78.
    Gevorkyan, S.K.: Investigation of singularities in the solutions of some problems of the theory of elasticity for anisotropic solids. Proc. Nat. Acad. Sci. Armen. Mech. 21(4), 30–39 (1968)Google Scholar
  79. 79.
    Givoli, D., Rivkin, L.: The DtN finite element method for elastic domains with cracks and entrant corners. Comput. Struct. 49, 633–642 (1993)MATHCrossRefGoogle Scholar
  80. 80.
    Givoli, D., Rivkin, L., Keller, J.B.: A finite element method for domains with corners. Int. J. Numer. Methods Eng. 35(6), 1329–1345 (1992)MathSciNetMATHCrossRefGoogle Scholar
  81. 81.
    Glinka, G.: Energy density approach to calculation of inelastic strain-stress near notches and cracks. Eng. Fract. Mech. 22(3), 485–508 (1985)CrossRefGoogle Scholar
  82. 82.
    Glinka, G., Ott, W., Nowack, H.: Elastoplastic plane strain analysis of stresses and strains at the notch root. J. Eng. Mater. Technol. 110, 195–204 (1988)CrossRefGoogle Scholar
  83. 83.
    Gómez, F.J., Elices, M.: A fracture criterion for blunted V-notched samples. Int. J. Fract. 127(3), 239–264 (2004)MATHCrossRefGoogle Scholar
  84. 84.
    Gospodinov, G., Drakaliev, P., Kerelezova, I.: A singular boundary element for a general corner case. In: Proceedings of the Anniversary Scientific Conference 50 Faculty of Hydrotechnics of the University of Architecture, Civil Engineering and Geodesy, Sofia, pp. 113–120 (1999)Google Scholar
  85. 85.
    Gross, B., Mendelson, A.: Plane elastostatic analysis of V-notched plates. Int. J. Fract. Mech. 8(3), 267–276 (1972)CrossRefGoogle Scholar
  86. 86.
    Groth, H.: Stress singularities and fracture at interface corners in bonded joints. Int. J. Adhes. Adhes. 8(2), 107–113 (1988)CrossRefGoogle Scholar
  87. 87.
    Gumerov, K.M., Kolesov, A.V., Gnidin, V.A.: Stress-strain state in the vicinity of a concentrator such as dihedral angle. In: Voprosy svarochnogo proizvodstva (Questions of welding production), pp. 3–8. Chelyabinsk (1987)Google Scholar
  88. 88.
    Hasebe, N., Iida, J.: Intensity of corner and stress concentration factor. J. Eng. Mech. 109(1), 346–356 (1983)CrossRefGoogle Scholar
  89. 89.
    Hasebe, N., Kutanda, Y.: Calculation of stress intensity factors from stress concentration factor. Eng. Fract. Mech. 10, 215–221 (1978)CrossRefGoogle Scholar
  90. 90.
    Hasebe, N., Nakamura, T., Iida, J.: Notch mechanics for plane and thin plate bending problems. Eng. Fract. Mech. 37(1), 87–99 (1990)CrossRefGoogle Scholar
  91. 91.
    Hein, V., Erdogan, F.: Stress singularities in a two-material wedge. Int. J. Fract. Mech. 7(3), 317–330 (1971)Google Scholar
  92. 92.
    Helsing, J., Jonsson, A.: On the computation of stress fields on polygonal domains with V-notches. Int. J. Numer. Methods Eng. 53(2), 433–453 (2002)MathSciNetMATHCrossRefGoogle Scholar
  93. 93.
    Helsing, J., Ojala, R.: Corner singularities for elliptic problems: integral equations, graded meshes, quadrature, and compressed inverse preconditioning. J. Comput. Phys. 227(20), 8820–8840 (2008)MathSciNetMATHCrossRefGoogle Scholar
  94. 94.
    Hills, D., Dini, D.: Characteristics of the process zone at sharp notch roots. Int. J. Solids Struct. 48(14), 2177–2183 (2011)CrossRefGoogle Scholar
  95. 95.
    Hufenbach, W., Kroll, L.: Stress analysis of notched anisotropic finite plates under mechanical and hygrothermal loads. Arch. Appl. Mech. 69(3), 145–159 (1999)MATHCrossRefGoogle Scholar
  96. 96.
    Huth, J.H.: The complex-variable approach to stress singularities. J. Appl. Mech. 20, 561–562 (1953)MathSciNetGoogle Scholar
  97. 97.
    Hwu, C., Kuo, T.L.: A unified definition for stress intensity factors of interface corners and cracks. Int. J. Solids Struct. 44(18), 6340–6359 (2007)MATHCrossRefGoogle Scholar
  98. 98.
    Irwin, G.R.: Fracture. In: Flügge, S. (ed.) Encyclopedia of Physics. Elasticity and Plasticity, vol. 6, pp. 551–590. Springer, Berlin (1958)Google Scholar
  99. 99.
    Johnston, P.R., Elliott, D.: A sinh transformation for evaluating nearly singular boundary element integrals. Int. J. Numer. Methods Eng. 62, 564–578 (2005)MathSciNetMATHCrossRefGoogle Scholar
  100. 100.
    Ju, S.: Finite element calculation of stress intensity factors for interface notches. Comput. Meth. Appl. Mech. Eng. 199(33), 2273–2280 (2010)MathSciNetMATHCrossRefGoogle Scholar
  101. 101.
    Ju, S.H.: Calculation of notch H-integrals using image correlation experiments. Exp. Mech. 50(4), 517–525 (2010)CrossRefGoogle Scholar
  102. 102.
    Ju, S.H., Chung, H.Y., Jhao, B.J.: Experimental calculation of mixed-mode notch stress intensity factors for anisotropic materials. Eng. Fract. Mech. 76(14), 2260–2271 (2009)CrossRefGoogle Scholar
  103. 103.
    Ju, S.H., Chiu, C.Y., Jhao, B.J.: Determination of V-notch SIFs in multi-material anisotropic wedges by digital correlation experiments. Int. J. Solids Struct. 47(7), 894–900 (2010)MATHCrossRefGoogle Scholar
  104. 104.
    Ju, S.H., Chung, H.Y., Liu, S.H.: Determining 2D notch SIFs by the image-correlation method. J. Chin. Inst. Eng. 34(4), 503–514 (2011)CrossRefGoogle Scholar
  105. 105.
    Kalandiya, A.I.: Remarks on the singularity of elastic solutions near corners. J. Appl. Math. Mech. 33(1), 127–131 (1969)MATHCrossRefGoogle Scholar
  106. 106.
    Karp, S.N., Karal, F.C.J.: The elastic-field behaviour in the neighbourhood of a crack of arbitrary angle. Commun. Pure Appl. Math. 15(4), 413–421 (1962)MathSciNetMATHCrossRefGoogle Scholar
  107. 107.
    Kazberuk, A.: Stress concentration around an oval hole. Acta Mech. Autom. 1, 25–30 (2007)Google Scholar
  108. 108.
    Kazberuk, A.: Determining parameters of fracture toughness of quasibrittle materials using specimens with notches. Acta Mech. Autom. 3(3), 28–31 (2009)Google Scholar
  109. 109.
    Kazberuk, A.: Stress intensity factors for cracks at the vertex of a rounded V-notch. Mater. Sci. 45(5), 676–687 (2009)CrossRefGoogle Scholar
  110. 110.
    Kazberuk, A.: Dwuwymiarowe zagadnienia mechaniki pȩkania ciał z karbami (Two-dimensional problems of fracture mechanics of bodies with notches). Bialystok University of Technology, Bialystok (2010)Google Scholar
  111. 111.
    Kazberuk, A., Niedźwiedź, M.: Stress distribution on the edge of a rounded v-shaped notch. In: Proceedings of the V International Symposium on Damage Mechanisms in Materials and Structures. Białystok, pp. 56–58 (2009)Google Scholar
  112. 112.
    Kazberuk, A., Niedźwiedź, M.: The influence of the shape of the notch on stress distribution on the boundary. Acta Mech. Autom. 3(1), 38–41 (2009)Google Scholar
  113. 113.
    Kazberuk, A., Savruk, M.P.: Selected problems of fracture mechanics of bodies with V-notches. In: Fatigue and Fracture Mechanics: Proceedings of the XXIII Symposium University Technology and Life Sciences, Bydgoszcz, pp. 67–68 (2010)Google Scholar
  114. 114.
    Kazberuk, A., Savruk, M.P.: Stress concentration in vertexes of notches in complex stress states. In: Proceedings of the XIII Conference on Fracture Mechanics, Opole, pp. 104–106 (2011)Google Scholar
  115. 115.
    Kazberuk, A., Savruk, M.P., Tarasiuk, G.: Concentration of stresses in the rounded corners of the notches and holes under antiplane deformation. In: Fatigue and Fracture Mechanics: Proceedings of the XXIV Symposium on University of Technology and Life Sciences. Bydgoszcz, pp. 69–70 (2012)Google Scholar
  116. 116.
    Keer, L.M., Chantaramungkorn, K.: An elastic half plane weakened by a rectangular trench. J. Appl. Mech. 42(3), 683–687 (1975)CrossRefGoogle Scholar
  117. 117.
    Kim, J.K., Cho, S.B.: An analysis of eigenvalues and eigenvectors for V-notched cracks in pseudo-isotropic dissimilar materials. Int. J. Korean Soc. Precis. Eng. 3(2), 33–44 (2002)Google Scholar
  118. 118.
    Klusák, J., Knésl, Z.: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept. Comput. Mater. Sci. 39(1), 214–218 (2007)CrossRefGoogle Scholar
  119. 119.
    Klusák, J., Knésl, Z.: Reliability assessment of a bi-material notch: strain energy density factor approach. Theor. Appl. Fract. Mech. 53(2), 89–93 (2010)CrossRefGoogle Scholar
  120. 120.
    Klusák, J., Profant, T., Kotoul, M.: A comparison of two direct methods of generalized stress intensity factor calculations of bi-material notches. Key Engineering Materials, vol. 385, pp. 409–412. Trans Tech Publications (2008)Google Scholar
  121. 121.
    Knésl, Z., Klusák, J., Náhlık, L.: Crack initiation criteria for singular stress concentrations, part i: a universal assesment of singular stress concentrations. Eng. Mech. 14(6), 399–408 (2007)Google Scholar
  122. 122.
    Knésl, Z., Klusák, J., Náhlık, L.: Crack initiation criteria for singular stress concentrations, part ii: stability of sharp and bimaterial notches. Eng. Mech. 14(6), 409–422 (2007)Google Scholar
  123. 123.
    Koshelev, V., Ghassemi, A.: Wedge boundary elements for 2D problems with corner points. Eng. Anal. Bound. Elem. 32(2), 168–175 (2008)MATHCrossRefGoogle Scholar
  124. 124.
    Kouzniak, N.V., Rossmanith, H.P., Savruk, M.P.: Plastic strain distribution near a tip of a sharp V-notch in a power hardening material. Mechanism and Mechanics of Damage and Failure, pp. 355–360. EMAS, London (1996)Google Scholar
  125. 125.
    Kouznyak, N.V., Rossmanith, H.P., Savruk, M.P.: Singular stresses at a tip of a sharp notch in power hardening materials under anti-symmetric load. Mater. Sci. 31(6), 693–701 (1995)CrossRefGoogle Scholar
  126. 126.
    Kuang, Z.B., Xu, X.P.: Singular behavior of a sharp V-notsh tip in power hardening material. In: Sih G.C., Nisitani H., Ishihara T. (eds.) Role of Fracture Mechanics in Modern Technology, pp. 477–484. Elsevier, Netherlands (1987)Google Scholar
  127. 127.
    Kuang, Z.B., Xu, X.P.: Stress and strain fields at the tip of a sharp V-notch in a power-hardening material. Int. J. Fract. 35(1), 39–53 (1987)Google Scholar
  128. 128.
    Kullmer, G.: Elastic stress fields in the vicinity of a narrow notch with circular root. In: Proceedings of the European Conference on Reliability and Structural Integrity of Advanced Materials, ECF 9, Varna, Bulgary, vol. 2, pp. 905–910 (1992)Google Scholar
  129. 129.
    Kullmer, G., Richard, H.A.: Influence of the root radius of crack-like notches on the fracture load of brittle components. Arch. Appl. Mech. 76, 711–723 (2006)MATHCrossRefGoogle Scholar
  130. 130.
    Labossiere, P.E.W., Dunn, M.L.: Calculation of stress intensities at sharp notches in anisotropic media. Eng. Fract. Mech. 61(5–6), 635–654 (1998)CrossRefGoogle Scholar
  131. 131.
    Labossiere, P.E.W., Dunn, M.L.: Stress intensities at interface corners in anisotropic bimaterials. Eng. Fract. Mech. 62(6), 555–576 (1999)CrossRefGoogle Scholar
  132. 132.
    Lazzarin, P., Filippi, S.: A generalized stress intensity factor to be applied to rounded V-shaped notches. Int. J. Solids Struct. 43(9), 2461–2478 (2006)MATHCrossRefGoogle Scholar
  133. 133.
    Lazzarin, P., Tovo, R.: A unified approach to the evaluation of linear elastic stress fields in the neibourhood of cracs and notches. Int. J. Fract. 78(1), 3–19 (1996)CrossRefGoogle Scholar
  134. 134.
    Lazzarin, P., Zambardi, R.: The equivalent strain energy density approach re-formulated and applied to sharp V-shaped notches under localized and generalized plasticity. Fatigue Fract. Eng. Mater. Struct. 25(10), 917–928 (2002)CrossRefGoogle Scholar
  135. 135.
    Lazzarin, P., Tovo, R., Filippi, S.: Elastic stress distributions in finite size plates with edge notches. Int. J. Fract. 91(3), 269–282 (1998)CrossRefGoogle Scholar
  136. 136.
    Lazzarin, P., Zappalorto, M., Berto, F.: Generalised stress intensity factors for rounded notches in plates under in-plane shear loading. Int. J. Fract. 170(2), 123–144 (2011)MATHCrossRefGoogle Scholar
  137. 137.
    Lebedev, D.F.: Brittle fracture of the composite elastic plane with a V-shaped notch. Proc. Natl. Acad. Sci. Armen. Mech. 43(2), 12–22 (1990)MATHGoogle Scholar
  138. 138.
    Li, J., Zhang, X.B., Recho, N.: Stress singularities near the tip of a two-dimensional notch formed from several elastic anisotropic materials. Int. J. Fract. 107(4), 379–395 (2001)CrossRefGoogle Scholar
  139. 139.
    Li, Y., Song, M.: Method to calculate stress intensity factor of V-notch in bi-materials. Acta Mech. Solida Sinica 21(4), 337–346 (2008)CrossRefGoogle Scholar
  140. 140.
    Lin, K.Y., Tong, P.: Singular finite elements for the fracture analysis of V-notched plate. Int. J. Numer. Methods Eng. 15(9), 1343–1354 (1980)MATHCrossRefGoogle Scholar
  141. 141.
    Lin, S., Hills, D.A.: Stress intensity factors for cracks emanating from a semicircular notch in a half-plate. J. Strain Anal. 31(6), 433–439 (1996)CrossRefGoogle Scholar
  142. 142.
    Livieri, P.: A new path independent integral applied to notched components under mode I loading. Int. J. Fract. 123(3–4), 107–125 (2003)CrossRefGoogle Scholar
  143. 143.
    Livieri, P., Segala, F.: Analytical evaluation of J-integral for elliptical and parabolic notches under mode I and mode II loading. Int. J. Fract. 148(1), 57–71 (2007)MATHCrossRefGoogle Scholar
  144. 144.
    Livieri, P., Segala, F.: Evaluation of stress intensity factors from elliptical notches under mixed mode loadings. Eng. Fract. Mech. 81, 110–119 (2012)CrossRefGoogle Scholar
  145. 145.
    Loghin, A., Joseph, P.F.: Asymptotic solutions for mixed mode loading of cracks and wedges in power law hardening materials. Eng. Fract. Mech. 68(14), 1511–1534 (2001)CrossRefGoogle Scholar
  146. 146.
    Lum, C., Foschi, R.O.: Arbitrary V-notches in orthotropic plates. J. Eng. Mech. 114(4), 638–655 (1988)CrossRefGoogle Scholar
  147. 147.
    Maz’ya, V.G., Soloviev, A.A.: Boundary integral equations on contours with peaks. Birkhäuser, Boston (2010)Google Scholar
  148. 148.
    Mikhailov, S.E.: On a plane problem for the two connected anisotropic wedges. Mech. Solids 13(4), 155–160 (1978)Google Scholar
  149. 149.
    Mikhailov, S.E.: The asymptotic behavior of solutions of some integral equations and plane elasticity problems near the corners under given stresses on the boundary. Mech. Solids 24(3), 33–43 (1989)Google Scholar
  150. 150.
    Mitra, A.K., Ingber, M.S.: A multiple-node method to resolve the difficulties in the boundary integral equation method caused by corners and discontinuous boundary conditions. Int. J. Numer. Methods Eng. 36(10), 1735–1746 (1993)MathSciNetMATHCrossRefGoogle Scholar
  151. 151.
    Mohammed, I., Liechti, K.M.: The effect of corner angles in bimaterial structures. Int. J. Solids Struct. 38(24), 4375–4394 (2001)MATHCrossRefGoogle Scholar
  152. 152.
    Munz, D., Yang, Y.Y.: Stresses near the edge of bonded dissimilar materials described by two stress intensity factors. Int. J. Fract. 60(2), 169–177 (1993)CrossRefGoogle Scholar
  153. 153.
    Muskhelishvili, N.I.: Some Basic Problems of the Mathematical Theory of Elasticity, 2nd edn. Noordhoff International Publishing, Leyden (1977)CrossRefGoogle Scholar
  154. 154.
    Nachname, M., Hohe, J., Becker, W., et al.: A closed-form analysis of material and geometry effects on stress singularities at unsymmetric bimaterial notches. Proc. Appl. Math. Mech. 2(1), 210–211 (2003)MATHCrossRefGoogle Scholar
  155. 155.
    Neskorodev, N.M., Neskorodev, R.N.: Stress singularities in the neighborhood of corners of orthotropic plates. J. Math. Sci. 101(1), 2785–2788 (2000)MATHCrossRefGoogle Scholar
  156. 156.
    Neuber, H.: Die halbeelliptische Kerbe mit Riß als Beispiel zur Korrelation von Mikro- und Makrospannungskonzentrationen. Ing.-Arch. 46, 389–399 (1977)CrossRefGoogle Scholar
  157. 157.
    Nisitani, H.: The two-dimensional stress problem solved using an electric digital computer. Bull. JSME 11(43), 14–23 (1968)CrossRefGoogle Scholar
  158. 158.
    Nisitani, H.: Solutions of notch problems by body force method. In: Sih, G.C. (ed.) Stress Analysis of Notch Problems. Mechanics of Fracture, vol. 5, pp. 1–68. Noordhoff International Publishing, Alphen aan den Rijn (1978)Google Scholar
  159. 159.
    Niu, Z., Ge, D., Cheng, C., Ye, J., Recho, N.: Evaluation of the stress singularities of plane V-notches in bonded dissimilar materials. Appl. Math. Model. 33, 1776–1792 (2009)MathSciNetMATHCrossRefGoogle Scholar
  160. 160.
    Niu, Z.R., Recho, N., Yang, Z.Y., Cheng, C.Z.: Elastic-plastic stress singularities of plane V-notches in power-hardening materials. Key Eng. Mater. 465, 105–110 (2011)CrossRefGoogle Scholar
  161. 161.
    Noda, N.A., Oda, K., Inoue, T.: Analysis of newly-defined stress intensity factors for angular corners using singular integral equations of the body force method. Int. J. Fract. 76(3), 243–261 (1996)CrossRefGoogle Scholar
  162. 162.
    Nui, L.S., Chehimi, C., Pluvinage, G.: Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials. Eng. Fract. Mech. 49(3), 325–335 (1994)CrossRefGoogle Scholar
  163. 163.
    Ovcharenko, Y.N.: Teoriya i praktika V-obraznykh vyrezov v mekhanike razrusheniya (Theory and practice of V-shaped notches in fracture mechanics). TSU, Tula (2003)Google Scholar
  164. 164.
    Ovcharenko, Y.N.: The elastic stress-strain state and strain energy density at the vertex of extremely narrow U-notches. Proc. Tula State Univ. Nat. Sci. 2, 97–108 (2010)Google Scholar
  165. 165.
    Panasyuk, V.V., Savruk, M.P., Datsyshin, A.P.: Raspredeleniye napryazhenii okolo treshchin v plastinakh i obolochkakh (Stress distribution around cracks in plates and shells). Naukova dumka, Kyiv (1976)Google Scholar
  166. 166.
    Panasyuk, V.V., Savruk, M.P., Kazberuk, A.: Stress concentration near sharp and rounded V-notches. Mater. Sci. 49(6), 711–722 (2014)CrossRefGoogle Scholar
  167. 167.
    Parton, V.Z., Morozov, E.M.: Elastic-Plastic Fracture Mechanics. Mir, Moscow (1978)MATHGoogle Scholar
  168. 168.
    Petkov, Z.B., Gospodinov, G.K.: Evaluation of fracture mechanics parameters for a general corner using a weight function method. Acta Mech. 93, 145–155 (1992)MATHCrossRefGoogle Scholar
  169. 169.
    Ping, X.C., Chen, M.C., Xie, J.L.: Singular stress analyses of V-notched anisotropic plates based on a novel finite element method. Eng. Fract. Mech. 75, 3819–3838 (2008)CrossRefGoogle Scholar
  170. 170.
    Pluvinage, G.: Mekhanika uprugoplasticheskogo razrysheniya (Mechanics of elastic-plastic fracture). Mir, Moscow (1993)Google Scholar
  171. 171.
    Portela, A., Aliabadi, M.H., Rooke, D.P.: Efficient boundary element analysis of sharp notched plates. Int. J. Numer. Methods Eng. 32, 445–470 (1991)MATHCrossRefGoogle Scholar
  172. 172.
    Prößdorf, S., Rathsfeld, A.: Quadrature and collocation methods for singular integral equations on curves with corners. Z. Anal. Anwendungen 8(3), 197–220 (1989)MathSciNetMATHGoogle Scholar
  173. 173.
    Providakis, C.P.: Boundary element analysis of creeping V-notched metallic plates in bending. Eng. Fract. Mech. 64(2), 129–140 (1999)CrossRefGoogle Scholar
  174. 174.
    Providakis, C.P.: Creep analysis of V-notched metallic plates: boundary element method. Theor. Appl. Fract. Mech. 32(1), 1–7 (1999)CrossRefGoogle Scholar
  175. 175.
    Qian, Z.Q.: On the evaluation of the free-edge stress intensity factors for a joint subjected to a uniform change in temperature. J. Therm. Stress. 23(5), 463–481 (2000)CrossRefGoogle Scholar
  176. 176.
    Qian, Z.Q.: On the evaluation of wedge corner stress intensity factors of bi-material joints with surface tractions. Comput. Struct. 79(1), 53–64 (2001)CrossRefGoogle Scholar
  177. 177.
    Qian, Z.Q., Akisanya, A.R.: Wedge corner stress behaviour of bonded dissimilar materials. Theor. Appl. Fract. Mech. 32(3), 209–222 (1999)CrossRefGoogle Scholar
  178. 178.
    Radaj, D., Zhang, S.: On the relations between notch stress and crack stress intensity in plane shear and mixed mode loading. Eng. Fract. Mech. 44(5), 691–704 (1993)CrossRefGoogle Scholar
  179. 179.
    Rao, A.K.: Stress concentrations and singularities at interface corners. ZAMM J. Appl. Math. Mech. 51(5), 395–406 (1971)MATHCrossRefGoogle Scholar
  180. 180.
    Rice, J.R.: A path independent integral and the approximate analysis of strain concentrations by notches and cracks. J. Appl. Mech. 35(2), 379–386 (1968)CrossRefGoogle Scholar
  181. 181.
    Rooke, D.P., Baratta, F.I., Cartwright, D.J.: Simple methods of determining stress intensity factors. Eng. Fract. Mech. 14(2), 397–426 (1981)CrossRefGoogle Scholar
  182. 182.
    Rösel, R.: On the wedge/notch eigenvalue. Int. J. Fract. 33(1), 61–71 (1987)CrossRefGoogle Scholar
  183. 183.
    Rudge, M.R.H.: Interfacial stress singularities in a bimaterial wedge. Int. J. Fract. 63(1), 21–26 (1993)CrossRefGoogle Scholar
  184. 184.
    Rudge, M.R.H., Tiernan, D.M.: Interfacial stress singularities in a bimaterial wedge. Int. J. Fract. 74(1), 63–75 (1995)CrossRefGoogle Scholar
  185. 185.
    Rudge, M.R.H., Tiernan, D.M.: Stress singularities in composite wedge-shaped materials. Fatigue Fract. Eng. Mater. Struct. 22(1), 11–15 (1999)CrossRefGoogle Scholar
  186. 186.
    Rzasnicki, W., Mendelson, A.: Application of boundary integral method to elastoplastic analysis of V-notched beams. Int. J. Fract. 11(2), 329–342 (1975)CrossRefGoogle Scholar
  187. 187.
    Sargsyan, A.M.: On stress singularity in one problem of elasticity theory for the wedge. Proc. Natl. Acad. Sci. Armen. Mech. 61(1), 48–53 (2008)Google Scholar
  188. 188.
    Savruk, M.P.: Dvumernyye zadachi uprugosti dla tel s treshchinami (Two-dimensional problems of elasticity for bodies with cracks). Naukova dumka, Kyiv (1981)Google Scholar
  189. 189.
    Savruk, M.P.: Koeficienty intensivnosti napryazhenii v telakh s treshchinami (Stress intensity factors in bodies with cracks). Naukova dumka, Kyiv (1988)Google Scholar
  190. 190.
    Savruk, M.P.: Solving planer problems of crack theory for regions with angular points. Mater. Sci. 24(1), 39–49 (1988)CrossRefGoogle Scholar
  191. 191.
    Savruk, M.P., Datsyshin, A.P.: Interaction between a system of cracks and the boundaries of an elastic body. Int. Appl. Mech. 10(7), 755–761 (1974)MATHGoogle Scholar
  192. 192.
    Savruk, M.P., Kazberuk, A.: Relationship between the stress intensity and stress concentration factors for sharp and rounded notches. Mater. Sci. 42(6), 725–738 (2006)CrossRefGoogle Scholar
  193. 193.
    Savruk, M.P., Kazberuk, A.: Stress concentration around a rounded notch for arbitrary vertex curvature. Acta Mech. Autom. 1(1), 90–102 (2007)MATHGoogle Scholar
  194. 194.
    Savruk, M.P., Kazberuk, A.: Stress intensity factors at the apex of the diamond hole in the stretched plane. In: Proceedings of the IV International Symposium on Damage Mechanisms in Materials and Structures, pp. 233–236. Bialystok (2007)Google Scholar
  195. 195.
    Savruk, M.P., Kazberuk, A.: Stress intensity factors at the apex of the diamond hole in the stretched plane. Acta Mech. Autom. 1(2), 37–40 (2007)MathSciNetGoogle Scholar
  196. 196.
    Savruk, M.P., Kazberuk, A.: A unified approach to problems of stress concentration near V-shaped notches with sharp and rounded tip. Int. Appl. Mech. 43(2), 182–197 (2007)MathSciNetMATHCrossRefGoogle Scholar
  197. 197.
    Savruk, M.P., Kazberuk, A.: A unified approach to the problem of the distribution of stresses near sharp and rounded V-shaped notches. In: Mhitarian, S.M. (ed.) Aktual’nye problemy mekhaniki sploshnoy sredy, pp. 359–363. Erevanskiy gos. un-t arhitektury i stroitel’stva, Erevan (2007)Google Scholar
  198. 198.
    Savruk, M.P., Kazberuk, A.: Plane periodic boundary-value problem of elasticity theory for a half-plane with curvilinear edge. Mater. Sci. 44(4), 461–470 (2008)CrossRefGoogle Scholar
  199. 199.
    Savruk, M.P., Kazberuk, A.: Problems of fracture mechanics of solid bodies with V-shaped notches. Mater. Sci. 45(2), 162–180 (2009)CrossRefGoogle Scholar
  200. 200.
    Savruk, M.P., Kazberuk, A.: Stress concentration problems for elastic domains with V-shaped notches. In: Panasyuk, V.V. (ed.) Mekhanika ruinuvannya materialiv i mitsnist’ konstruktsii (Fracture mechanics of materials and strength of structures), pp. 75–86. Lviv (2009)Google Scholar
  201. 201.
    Savruk, M.P., Kazberuk, A.: Stresses in an elastic plane with a periodic system of closely located holes. Mater. Sci. 45(6), 831–844 (2009)CrossRefGoogle Scholar
  202. 202.
    Savruk, M.P., Kazberuk, A.: On some problems of fracture mechanics in bodies with sharp and rounded V-notches. Acta Mech. Autom. 4(2), 113–123 (2010)MATHGoogle Scholar
  203. 203.
    Savruk, M.P., Kazberuk, A.: Two-dimensional fracture mechanics problems for solids with sharp and rounded V-notches. Int. J. Fract. 161, 79–95 (2010)MATHCrossRefGoogle Scholar
  204. 204.
    Savruk, M.P., Kazberuk, A.: Antisymmetric stress distribution in an elastic body with a sharp or a rounded V-shaped notch. Mater. Sci. 46(6), 711–722 (2011)CrossRefGoogle Scholar
  205. 205.
    Savruk, M.P., Kazberuk, A.: Distribution of stresses near V-shaped notches in the complex stressed state. Mater. Sci. 47(4), 476–487 (2012)CrossRefGoogle Scholar
  206. 206.
    Savruk, M.P., Osiv, P.M.: Numerical solution of the singular integral equations for plain problems of the theory of cracks with angular points on the boundary contours. Mater. Sci. 25(3), 294–301 (1989)CrossRefGoogle Scholar
  207. 207.
    Savruk, M.P., Zelenyak, V.M.: Dvovymirni zadachi termopruzhnosti dla kuskovo-odnoridnykh til z trishchynamy (Two-dimensional problem of thermoelasticity for piecewise homogeneous bodies with cracks). Rastr-7, Lviv (2009)Google Scholar
  208. 208.
    Savruk, M.P., Osiv, P.M., Prokopchuk, I.V.: Chislennyy analiz v ploskikh zadachakh teorii treshchin (Numerical analysis in plane problems of theory of cracks). Naukova dumka, Kyiv (1989)Google Scholar
  209. 209.
    Savruk, M.P., Shkarayev, S.V., Madenci, E.: Stress near apex of dissimilar material with bilinear behavior. Theor. Appl. Fract. Mech. 31(3), 203–212 (1999)CrossRefGoogle Scholar
  210. 210.
    Savruk, M.P., Kazberuk, A., Niedźwiedź, M.: Stress distribution around sharp and rounded corners notches for complex stress state. Matematychni problemy mekhaniky neodnoridnykh struktur (Mathematical problems of mechanics of nonhomogeneous structures), pp. 81–83. Lviv (2010)Google Scholar
  211. 211.
    Savruk, M.P., Kazberuk, A., Tarasiuk, G.: Distribution of stresses over the contour of rounded V-shaped notch under antiplane deformation. Mater. Sci. 47(6), 717–725 (2012)CrossRefGoogle Scholar
  212. 212.
    Savruk, M.P., Kazberuk, A., Tarasiuk, G.: Stress concentration near holes in the elastic plane subjected to antiplane deformation. Mater. Sci. 48(4), 415–426 (2013)CrossRefGoogle Scholar
  213. 213.
    Seweryn, A.: Asymptotic methods of determining stress intensity factors for V-notches in plane problems in the theory of elasticity. Rozprawy Inżynierskie (Eng. Trans.) 38, 467–486 (1990)Google Scholar
  214. 214.
    Seweryn, A.: Modeling distributions of stresses and displacements in the vicinity of the V-notch apex in plane problems in the theory of elasticity - I. Rozprawy Inżynierskie (Eng. Trans.) 38, 351–376 (1990)Google Scholar
  215. 215.
    Seweryn, A.: Modeling distributions of stresses and displacements in the vicinity of the V-notch apex in plane problems in the theory of elasticity - II. Rozprawy Inżynierskie (Eng. Trans.) 38, 377–396 (1990)Google Scholar
  216. 216.
    Seweryn, A.: Kumulacja uszkodzeń i pȩkanie elementów konstrukcyjnych w złożonych stanach obcia̧żeń (Accumulation of damage and fracture of structural elements in complex states of loading). Bialystok University of Technology, Bialystok (1997)Google Scholar
  217. 217.
    Seweryn, A.: Modeling of singular stress fields using finite element method. Int. J. Solids Struct. 39(18), 4787–4804 (2002)MATHCrossRefGoogle Scholar
  218. 218.
    Seweryn, A.: Metody numeryczne w mechanice pekania (Numerical methods in fracture mechanics). Institute of Fundamental Technological Research. Polish Academy of Sciences, Warsaw (2003)Google Scholar
  219. 219.
    Seweryn, A., Adamowicz, A.: Modelling of stress fields in the elements with cracks and sharp notches. Przeglad Mechaniczny (Mech. Rev.) 1, 36–41 (2002)Google Scholar
  220. 220.
    Seweryn, A., Adamowicz, A.: On analytic constraints and elements methods in modeling stresses near the tips of cracks and V-notches. Mater. Sci. 41(4), 462–478 (2005)CrossRefGoogle Scholar
  221. 221.
    Seweryn, A., Łukaszewicz, A.: Numerical modeling methods of problems of linear fracture mechanics. Przeglad Mechaniczny (Mech. Rev.) 5–6, 36–42 (2000)Google Scholar
  222. 222.
    Seweryn, A., Molski, K.: Elastic stress singularities and corresponding generalized stress intensity factors for angular corners under various boundary conditions. Eng. Fract. Mech. 55(4), 529–556 (1996)CrossRefGoogle Scholar
  223. 223.
    Shin, K.C., Kim, W.S., Lee, J.J.: Application of stress intensity to design of anisotropic/isotropic bi-materials with a wedge. Int. J. Solids Struct. 44(24), 7748–7766 (2007)MATHCrossRefGoogle Scholar
  224. 224.
    Sih, G.C.: Strain-energy-density factor applied to mixed mode crack problems. Int. J. Fract. 10(3), 305–321 (1974)CrossRefGoogle Scholar
  225. 225.
    Sih, G.C., Liebowitz, H.: Mathematical theories of brittle fracture. In: Liebowitz, H. (ed.) Fracture, vol. 2, pp. 67–190. Academic Press, New York (1968)Google Scholar
  226. 226.
    Sinclair, G.B.: A remark on the determtnation of mode I and mode II stress intensity factors for sharp re-entrant corners. Int. J. Fract. 27(3), 81–85 (1985)MathSciNetCrossRefGoogle Scholar
  227. 227.
    Sinclair, G.B., Okajima, M., Griffin, J.M.: Path independent integrals for computing stress intensity factors at sharp notches in elastic plates. Int. J. Numer. Methods Eng. 20, 999–1008 (1984)MATHCrossRefGoogle Scholar
  228. 228.
    Song, C., Tin-Loi, F., Gao, W.: A definition and evaluation procedure of generalized stress intensity factors at cracks and multi-material wedges. Eng. Fract. Mech. 77(12), 2316–2336 (2010)CrossRefGoogle Scholar
  229. 229.
    Strandberg, M.: A numerical study of the elastic stress field arising from sharp and blunt V-notches in SENT-specimen. Int. J. Fract. 100(4), 329–342 (1999)CrossRefGoogle Scholar
  230. 230.
    Szabó, B.A., Yosibash, Z.: Numerical analysis of singularities in two dimensions. Part 2: computation of generalized flux/stress intensity factors. Int. J. Numer. Methods Eng. 39(3), 409–434 (1996)MATHCrossRefGoogle Scholar
  231. 231.
    Teh, L.S., Brennan, F.P.: Evaluation of mode I stress intensity factors for edge cracks from 2-D V-notches using composition of constituent SIF weight functions. Int. J. Fatigue 29(7), 1253–1268 (2007)CrossRefGoogle Scholar
  232. 232.
    Teh, L.S., Love, A.J., Brennan, F.P.: Mode I stress intensity factors for edge cracks emanating from 2-D U-notches using composition of SIF weight functions. Int. J. Fatigue 28(4), 355–365 (2006)CrossRefGoogle Scholar
  233. 233.
    Theocaris, P.S.: The order of singularity at a multi-wedge corner of a composite plate. Int. J. Eng. Sci. 12(2), 107–120 (1974)MATHCrossRefGoogle Scholar
  234. 234.
    Theocaris, P.S., Ioakimidis, N.I.: The V-notched elastic half-plane problem. Acta Mech. 32(1–3), 125–140 (1979)MathSciNetMATHCrossRefGoogle Scholar
  235. 235.
    Tur, M., Fuenmayor, J., Mugadu, A., Hills, D.A.: On the analysis of singular stress fields. Part 1: finite element formulation and application to notches. J. Strain Anal. 37(5), 437–444 (2002)CrossRefGoogle Scholar
  236. 236.
    Ufland, Y.S.: Integral’nye preobrazovaniya v zadachakh teorii uprogosti (Integral transforms in problems of the theory of elasticity). Nauka, Moscow (1967)Google Scholar
  237. 237.
    Ushijima, K., Chen, D.H., Kitte, N.: Intensity of a plastic singular stress field at the notch tip. JSME Int. J. A Solid Mech. Mater. Eng. 45(2), 170–176 (2002)Google Scholar
  238. 238.
    Vable, M., Maddi, J.R.: Boundary element analysis of inclusions with corners. Eng. Anal. Bound. Elem. 31(9), 762–770 (2007)MATHCrossRefGoogle Scholar
  239. 239.
    Vorovich, I.I.: On some problems of stress concentration. Kontsentratsiya napryazheniy (Stress concentration), vol. 2, pp. 45–53. Naukova dumka, Kyiv (1968)Google Scholar
  240. 240.
    Vorovich, I.I.: Formulation of boundary-value problems in the theory of elasticity for an infinite energy integral and basic properties of homogeneous solutions. Mekhanika deformiruyemykh tel i konstruktsii (Mechanics of solids and structures), pp. 112–128. Mashinostroyeniye, Moskow (1975)Google Scholar
  241. 241.
    Wang, W., Kuang, Z.: Higher order asymptotic fields at the tip of a sharp V-notch in a power-hardening material. Acta. Mech. Solida Sinica 15(2), 102–110 (2002)MathSciNetGoogle Scholar
  242. 242.
    Wieghardt, K.: über das spalten und zerreißen elastischer körper. Z. Math. Phys. 55(2), 60–103 (1907)MATHGoogle Scholar
  243. 243.
    Williams, M.L.: Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J. Appl. Mech. 19(4), 526–530 (1952)Google Scholar
  244. 244.
    Williams, M.L.: The complex variable approach to stress singularities. J. Appl. Mech. 23, 477–478 (1956)Google Scholar
  245. 245.
    Wu, K.C., Chang, F.T.: Near-tip fields in a notched body with dislocations and body forces. J. Appl. Mech. 60(4), 936–941 (1993)MATHCrossRefGoogle Scholar
  246. 246.
    Wu, K.C., Chen, C.T.: Stress analysis of anisotropic elastic V-notched bodies. Int. J. Solids Struct. 33(17), 2403–2416 (1996)MATHCrossRefGoogle Scholar
  247. 247.
    Wu, Z., Liu, Y.: Analytical solution for the singular stress distribution due to V-notch in an orthotropic plate material. Eng. Fract. Mech. 75(8), 2367–2384 (2008)CrossRefGoogle Scholar
  248. 248.
    Wu, Z., Liu, Y.: Asymptotic fields near an interface corner in orthotropic bi-materials. Int. J. Fract. 156(1), 37–51 (2009)MATHCrossRefGoogle Scholar
  249. 249.
    Wu, Z., Liu, Y.: Singular stress field near interface edge in orthotropic/isotropic bi-materials. Int. J. Solids Struct. 47(17), 2328–2335 (2010)MATHCrossRefGoogle Scholar
  250. 250.
    Xia, L., Wang, T.C.: Singular behaviour near the tip of a sharp V-notch in a power law hardening material. Int. J. Fract. 59(1), 83–93 (1993)MathSciNetGoogle Scholar
  251. 251.
    Xu, J.Q., Liu, Y.H., Wang, X.G.: Numerical methods for the determination of multiple stress singularities and related stress intensity coefficients. Eng. Fract. Mech. 63(6), 775–790 (1999)CrossRefGoogle Scholar
  252. 252.
    Xu, X.X., Cai, Q.G., Su, Y., Ma, W.D.: Notch root strain and stress distributions in power hardening materials. Int. J. Fract. 41(4), 275–282 (1989)CrossRefGoogle Scholar
  253. 253.
    Yang, S., Chao, Y.J.: Asymptotic deformation and stress fields at the tip of a sharp notch in an elastic-plastic material. Int. J. Fract. 54(3), 211–224 (1992)Google Scholar
  254. 254.
    Yosibash, Z., Schiff, B.: A superelement for two-dimensional singular boundary value problems in linear elasticity. Int. J. Fract. 62(4), 325–340 (1993)Google Scholar
  255. 255.
    Yosibash, Z., Schiff, B.: Superelements for the finite element solution of two-dimensional elliptic problems with boundary singularities. Finite Elem. Anal. Des. 26(4), 315–335 (1997)MathSciNetMATHCrossRefGoogle Scholar
  256. 256.
    Yosibash, Z., Szabó, B.: Numerical analysis of singularities in two-dimensions part 1: computation of eigenpairs. Int. J. Numer. Methods Eng. 38(12), 2055–2082 (1995)MATHCrossRefGoogle Scholar
  257. 257.
    Yosibash, Z., Szabó, B.A.: Generalized stress intensity factors in linear elastostatics. Int. J. Fract. 72(3), 223–240 (1995)CrossRefGoogle Scholar
  258. 258.
    Yosibash, Z., Szabó, B.A.: A note on numerically computed eigenfunctions and generalized stress intensity factors associated with singular points. Eng. Fract. Mech. 54(4), 593–595 (1996)CrossRefGoogle Scholar
  259. 259.
    Yu, T., Shi, L.: Determination of sharp V-notch stress intensity factors using the extended finite element method. J. Strain Anal. 47(2), 95–103 (2012)CrossRefGoogle Scholar
  260. 260.
    Yuan, H.: Singular stress fields at V-notch tips in elastoplastic pressure-sensitive materials. Acta Mech. 118(1–4), 151–170 (1996)MATHCrossRefGoogle Scholar
  261. 261.
    Yuan, H., Lin, G.: Analysis of elastoplastic sharp notches. Int. J. Fract. 67(3), 187–216 (1994)CrossRefGoogle Scholar
  262. 262.
    Zargaryan, S.S.: Plane elasticity problem for simply connected domains with corners for given external forces on the boundary. Rep. Acad. Sci. Armen. SSR 60(1), 43–50 (1975)Google Scholar
  263. 263.
    Zargaryan, S.S.: Singularities of solutions of a system of singular integral equations in plane elasticity theory for given stresses on the boundary. Rep. Acad. Sci. Armen. SSR 77(4), 167–172 (1983)MathSciNetMATHGoogle Scholar
  264. 264.
    Zargaryan, S.S., Maz’ya, V.G.: The asymptotic form of the solutions of the integral equations of potential theory in the neighbourhood of the corner points of a contour. J. Appl. Math. Mech. 48(1), 120–124 (1984)MathSciNetMATHCrossRefGoogle Scholar
  265. 265.
    Zhang, N., Joseph, P.F.: A nonlinear finite element eigenanalysis of singular plane stress fields in bimaterial wedges including complex eigenvalues. Int. J. Fract. 90(3), 175–207 (1998)CrossRefGoogle Scholar
  266. 266.
    Zhang, S.W., Chen, Y.Z., Lin, W.Z.: Investigation of shear stress distribution in notch problem under sliding mode case. Int. J. Fract. 56(1), 85–92 (1992)CrossRefGoogle Scholar
  267. 267.
    Zhu, H., Xu, J., Feng, M.: Singular fields near a sharp V-notch for power law creep material. Int. J. Fract. 168(2), 159–166 (2011)MATHCrossRefGoogle Scholar

Copyright information

© Springer International Publishing Switzerland 2017

Authors and Affiliations

  1. 1.Bialystok University of TechnologyBialystokPoland
  2. 2.Karpenko Physico-Mechanical Institute of the National Academy of Sciences of UkraineLvivUkraine

Personalised recommendations