Advertisement

Introduction

  • Paulo FloresEmail author
  • Hamid M. Lankarani
Chapter
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 226)

Abstract

This chapter presents some key aspects related to the modeling and simulation of contact problems in multibody mechanical systems. First, the fundamental aspects of the classical problem of contact mechanics are briefly visited. Next, the main methodologies commonly utilized to model and simulate contact-impact problems in multibody systems are presented, namely, those based on the penalty approach and the ones based on non-smooth formulation. In the sequel of this process, the pros and cons of each method are discussed. As application, particular emphasis is given to the description of the biomechanical contact problems for modeling and simulating human articulations such as the knee joint, and the description of foot-ground interaction during human gait. The generality of the contact force models in multibody dynamics are then summarized in terms of simplicity and efficiency of numerical computation.

Keywords

Multibody dynamics Contact-impact mechanics Penalty method Non-smooth formulation 

References

  1. Abouhossein A, Weisse B, Ferguson SJ (2011) A multibody modelling approach to determine load sharing between passive elements of the lumbar spine. Comput Meth Biomech Biomed Eng 14(6):527–537CrossRefGoogle Scholar
  2. Acary V, Brogliato B (2008) Numerical methods for nonsmooth dynamical systems: applications in mechanics and electronics. Lecture notes in applied and computational mechanics, vol 35. Springer, BerlinGoogle Scholar
  3. Almeida J, Fraga F, Silva M, Silva-Carvalho L (2009) Feedback control of the head-neck complex for nonimpact scenarios using multibody dynamics. Multibody Sys Dyn 21:395–416CrossRefzbMATHGoogle Scholar
  4. Alves J, Peixinho N, Silva MT, Flores P, Lankarani HM (2015) A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solids. Mech Mach Theory 85:172–188CrossRefGoogle Scholar
  5. Ambrósio J, Veríssimo P (2009) Improved bushing models for general multibody systems and vehicle dynamics. Multibody Sys Dyn 22:341–365CrossRefzbMATHGoogle Scholar
  6. Anitescu M, Potra FA (1997) Formulating dynamic multi-rigid-body contact problems with friction as solvable linear complementarity problems. Nonlinear Dyn 14(3):231–247MathSciNetCrossRefzbMATHGoogle Scholar
  7. Anitescu M, Potra FA, Stewart DE (1999) Time-stepping for three-dimensional rigid body dynamics. Comput Methods Appl Mech Eng 177(3):183–197MathSciNetCrossRefzbMATHGoogle Scholar
  8. Askari E, Flores P, Dabirrahmani D, Appleyard R (2014) Nonlinear vibration and dynamics of ceramic on ceramic artificial hip joints: a spatial multibody modelling. Nonlinear Dyn 76(2):1365–1377MathSciNetCrossRefGoogle Scholar
  9. Askari E, Flores P, Dabirrahmani D, Appleyard R (2015) A computational analysis of squeaking hip prostheses. J Comput Nonlinear Dyn 10(2):024502CrossRefGoogle Scholar
  10. Bei Y, Fregly BJ (2004) Multibody dynamic simulation of knee contact mechanics. Med Eng Phys 26:777–789CrossRefGoogle Scholar
  11. Blankevoort L, Kuiper JH, Huiskes R, Grootenboer HJ (1991) Articular contact in a three-dimensional model of the knee. J Biomech 24(11):1019–1031CrossRefGoogle Scholar
  12. Boos M, McPhee J (2010) Volumetric contact models and experimental validation. In: Proceedings of the 1st joint international conference on multibody dynamics, Lappeenranta, Finland, 25–27 May 2010, 10 pGoogle Scholar
  13. Brogliato B (2003) Some perspectives on the analysis and control of complementarity systems. IEEE Trans Autom Control 48(6):918–935MathSciNetCrossRefGoogle Scholar
  14. Brogliato B, Ten Dam AA, Paoli L, Genot F, Abadie M (2002) Numerical simulations of finite dimensional multibody nonsmooth mechanical systems. Appl Mech 55:107–150CrossRefGoogle Scholar
  15. Castro APG, Completo A, Simões JA, Flores P (2015) Biomechanical behaviour of cancellous bone on patellofemoral arthroplasty with journey prosthesis: a finite element study. Comput Meth Biomech Biomed Eng 18(10):1090–1098CrossRefGoogle Scholar
  16. Choi J, Ryu HS, Kim CW, Choi JH (2010) An efficient and robust contact algorithm for a compliant contact force model between bodies of complex geometry. Multibody Sys Dyn 23:99–120CrossRefzbMATHGoogle Scholar
  17. Dias JMP, Pereira MS (1995) Dynamics of flexible mechanical systems with contact-impact and plastic deformations. Nonlinear Dyn 8:491–512Google Scholar
  18. Dopico D, Luaces A, Gonzalez M, Cuadrado J (2009) Dealing with multiple contacts in a human-in-the-loop application. In: Arczewski K, Frączek J, Wojtyra M (eds) Proceedings of multibody dynamics 2009, ECCOMAS thematic conference, Warsaw, Poland, 29 June–2 July 2009, 17 pGoogle Scholar
  19. Ebrahimi S, Eberhard P (2006) A linear complementarity formulation on position level for frictionless impact of planar deformable bodies. ZAMM Z Angew Math Mech 86(10):807–817MathSciNetCrossRefzbMATHGoogle Scholar
  20. Ebrahimi S, Kövecses J (2010) Unit homogenization for estimation of inertial parameters of multibody mechanical systems. Mech Mach Theory 45(3):438–453CrossRefzbMATHGoogle Scholar
  21. Feeny B, Guran A, Hinrichs N, Popp K (1998) A historical review on dry friction and stick-slip phenomena. Appl Mech Rev 51:321–341CrossRefGoogle Scholar
  22. Ferreira A (2008) Multibody model of the cervical spine and head for the simulation of traumatic and degenerative disorders. MSc thesis, Technical University of Lisbon, Lisbon, PortugalGoogle Scholar
  23. Flickinger DM, Bowling A (2010) Simultaneous oblique impacts and contacts in multibody systems with friction. Multibody Sys Dyn 23:249–261MathSciNetCrossRefzbMATHGoogle Scholar
  24. Flores P (2009) Modeling and simulation of wear in revolute clearance joints in multibody systems. Mech Mach Theory 44(6):1211–1222MathSciNetCrossRefzbMATHGoogle Scholar
  25. Flores P (2015) Concepts and formulations for spatial multibody dynamics. Springer, BerlinGoogle Scholar
  26. Flores P, Ambrósio J (2010) On the contact detection for contact-impact analysis in multibody systems. Multibody Sys Dyn 24(1):103–122MathSciNetCrossRefzbMATHGoogle Scholar
  27. Flores P, Lankarani HM (2012) Dynamic response of multibody systems with multiple clearance joints. J Comput Nonlinear Dyn 7(3):031003CrossRefGoogle Scholar
  28. Flores P, Lankarani HM (2014) An overview of several formulations for dry and lubricated revolute joint clearances in planar rigid-multi-body mechanical systems. In: Proceedings of IDETC/CIE 2014 ASME 2014 international design engineering technical conferences and computers and information in engineering conference, 17–20 Aug 2014, Buffalo, New York, USA, 14 pGoogle Scholar
  29. Flores P, Ambrósio J, Claro JP (2004) Dynamic analysis for planar multibody mechanical systems with lubricated joints. Multibody Sys Dyn 12(1):47–74CrossRefzbMATHGoogle Scholar
  30. Flores P, Ambrósio J, Claro JCP, Lankarani HM (2006) Spatial revolute joints with clearances for dynamic analysis of multi-body systems. In: Proceedings of the Institution of Mechanical Engineers, Part K. J Multi-body Dyn 220(4):257–271Google Scholar
  31. Flores P, Ambrósio J, Claro JCP, Lankarani HM (2007) Dynamic behaviour of planar rigid multi-body systems including revolute joints with clearance. In: Proceedings of the Institution of Mechanical Engineers, Part K. J Multi-body Dyn 221(2):161–174Google Scholar
  32. Flores P, Ambrósio J, Claro JCP, Lankarani HM (2008) Translational joints with clearance in rigid multibody systems. J Comput Nonlinear Dyn 3(1):0110071-10CrossRefGoogle Scholar
  33. Flores P, Leine R, Glocker C (2010) Modeling and analysis of planar rigid multibody systems with translational clearance joints based on the non-smooth dynamics approach. Multibody Sys Dyn 23:165–190MathSciNetCrossRefzbMATHGoogle Scholar
  34. Flores P, Koshy CS, Lankarani HM, Ambrósio J, Claro JCP (2011) Numerical and experimental investigation on multibody systems with revolute clearance joints. Nonlinear Dyn 65(4):383–398CrossRefzbMATHGoogle Scholar
  35. Flores P, Leine R, Glocker C (2012) Application of the nonsmooth dynamics approach to model and analysis of the contact-impact events in cam-follower systems. Nonlinear Dyn 69(4):2117–2133MathSciNetCrossRefGoogle Scholar
  36. Förg M, Pfeiffer F, Ulbrich H (2005) Simulation of unilateral constrained systems with many bodies. Multibody Sys Dyn 14(2):137–154MathSciNetCrossRefzbMATHGoogle Scholar
  37. Gilardi G, Sharf I (2002) Literature survey of contact dynamics modeling. Mech Mach Theory 37:1213–1239MathSciNetCrossRefzbMATHGoogle Scholar
  38. Glocker C, Pfeiffer F (1993) Complementarity problems in multibody systems with planar friction. Arch Appl Mech 63(7):452–463zbMATHGoogle Scholar
  39. Glocker C, Studer C (2005) Formulation and preparation for numerical evaluation of linear complementary systems in dynamics. Multibody Sys Dyn 13:447–463MathSciNetCrossRefzbMATHGoogle Scholar
  40. Goldsmith W (1960) Impact—The theory and physical behaviour of colliding solids. Edward Arnold Ltd, LondonzbMATHGoogle Scholar
  41. Gonthier Y, McPhee J, Lange C, Piedboeuf J-C (2004) A regularized contact model with asymmetric damping and dwell-time dependent friction. Multibody Sys Dyn 11:209–233CrossRefzbMATHGoogle Scholar
  42. Guess TM, Thiagarajan G, Kia M, Mishra M (2010) A subject specific multibody model of the knee with menisci. Med Eng Phys 32(5):505–515CrossRefGoogle Scholar
  43. Güler HC, Berme N, Simon RS (1998) A viscoelastic sphere model for the representation of plantar soft tissue during simulations. J Biomech 31(9):847–853CrossRefGoogle Scholar
  44. Han I, Gilmore BJ (1993) Multi body impact motion with friction analysis, simulation, and validation. J Mech Des 115:412–422CrossRefGoogle Scholar
  45. Haug EJ, Wu SC, Yang SM (1986) Dynamics of mechanical systems with coulomb friction, stiction, impact and constraint addition deletion—I theory. Mech Mach Theory 21:401–406CrossRefGoogle Scholar
  46. Hertz H (1881) Über die Berührung fester elastischer Körper. Journal reine und angewandte Mathematik 92:156–171MathSciNetGoogle Scholar
  47. Hippmann G (2004) An algorithm for compliant contact between complexly shaped bodies. Multibody Sys Dyn 12:345–362MathSciNetCrossRefzbMATHGoogle Scholar
  48. Hirokawa S (1991) Three-dimensional mathematical model analysis of the patellofemoral joint. J Biomech 24(8):659–671CrossRefGoogle Scholar
  49. Hirschkorn M, McPhee J, Birkett S (2006) Dynamic modeling and experimental testing of a piano action mechanism. J Comput Nonlinear Dyn 1(1):47–55CrossRefGoogle Scholar
  50. Hunt KH, Crossley FRE (1975) Coefficient of restitution interpreted as damping in vibroimpact. J Appl Mech 7:440–445CrossRefGoogle Scholar
  51. Khulief YA (2013) Modeling of impact in multibody systems: an overview. J Comput Nonlinear Dyn 8:0210121Google Scholar
  52. Khulief YA, Shabana AA (1987) A continuous force model for the impact analysis of flexible multibody systems. Mech Mach Theory 22:213–224CrossRefGoogle Scholar
  53. Khulief YA, Haug EJ, Shabana AA (1983) Dynamic analysis of large scale mechanical systems with intermittent motion. Technical Report No. CCAD-83-10, University of Iowa, USAGoogle Scholar
  54. Koo S, Andriacchi TP (2007) A comparison of the influence of global functional loads vs. local contact anatomy on articular cartilage thickness at the knee. J Biomech 40(13):2961–2966CrossRefGoogle Scholar
  55. Koshy CS, Flores P, Lankarani HM (2013) Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: computational and experimental approaches. Nonlinear Dyn 73(1–2):325–338CrossRefGoogle Scholar
  56. Kwak BM (1991) Complementarity problem formulation of three-dimensional frictional contact. J Appl Mech 58:134–140CrossRefzbMATHGoogle Scholar
  57. Lankarani HM (2000) A poisson-based formulation for frictional impact analysis of multibody mechanical systems with open or closed kinematic chains. J Mech Des 122(4):489–497CrossRefGoogle Scholar
  58. Lankarani HM, Nikravesh PE (1988) Application of the canonical equations of motion in problems of constrained multibody systems with intermittent motion. In: ASME advances in design automation, DE-vol 14, pp 414–423Google Scholar
  59. Lankarani HM, Nikravesh PE (1990) A contact force model with hysteresis damping for impact analysis of multibody systems. J Mech Des 112:369–376CrossRefGoogle Scholar
  60. Lankarani HM, Nikravesh PE (1992) Canonical impulse-momentum equations for impact analysis of multibody systems. J Mech Des 114(1):180–186CrossRefGoogle Scholar
  61. Lankarani HM, Nikravesh PE (1994) Continuous contact force models for impact analysis in multibody systems. Nonlinear Dyn 5:193–207Google Scholar
  62. Leal A, Pereira R, Pereira R, Flores P, Silva FS, Espregueira-Mendes, J (2015) Design of a new medical device for aiding clinical diagnosis of patellofemoral disorders. New Trends Mech Mach Sci 633–641Google Scholar
  63. Lee TW, Wang AC (1983) On the dynamics of intermittent-motion mechanisms. Part 1—Dynamic model and response. J Mech Transm Autom Des 105:534–540CrossRefGoogle Scholar
  64. Lee J, Flashner H, McNitt-Gray JL (2011) Estimation of multibody kinematics using position measurements. J Comput Nonlinear Dyn 6(3):031001CrossRefGoogle Scholar
  65. Lin YC, Haftka RT, Queipo NV, Fregly BJ (2010) Surrogate articular contact models for computationally efficient multibody dynamic simulations. Med Eng Phys 32(6):584–594CrossRefGoogle Scholar
  66. Liu C-S, Zhang K, Yang R (2007) The FEM analysis and approximate model for cylindrical joints with clearances. Mech Mach Theory 42:183–197CrossRefzbMATHGoogle Scholar
  67. Lopes DS, Silva MT, Ambrósio JA, Flores P (2010) A mathematical framework for rigid contact detection between quadric and superquadric surfaces. Multibody Sys Dyn 24(3):255–280MathSciNetCrossRefzbMATHGoogle Scholar
  68. Machado M, Flores F, Claro JCP, Ambrósio J, Silva M, Completo A, Lankarani HM (2010) Development of a planar multibody model of the human knee joint. Nonlinear Dyn 60(3):459–478CrossRefzbMATHGoogle Scholar
  69. Machado M, Flores P, Ambrósio J, Completo A (2011) Influence of the contact model on the dynamic response of the human knee joint. In: Proceedings of the IMechE, Part K. J Multi-body Dyn 225(4):344–358Google Scholar
  70. Machado M, Moreira P, Flores P, Lankarani HM (2012) Compliant contact force models in multibody dynamics: evolution of the Hertz contact theory. Mech Mach Theory 53:99–121CrossRefGoogle Scholar
  71. Machado M, Flores P, Ambrósio J (2014) A lookup-table-based approach for spatial analysis of contact problems. J Comput Nonlinear Dyn 9(4):041010CrossRefGoogle Scholar
  72. Marques F, Flores P, Lankarani HM (2015) On the frictional contacts in multibody system dynamics. In: Proceedings of the ECCOMAS thematic conference on multibody dynamics 2015, Barcelona, Spain, 29 June–2 July 2015, 12 pGoogle Scholar
  73. Meireles S, Completo A, Simões JA, Flores P (2010) Strain shielding in distal femur after patellofemoral arthroplasty under different activity conditions. J Biomech 43(3):477–484CrossRefGoogle Scholar
  74. Millard M, McPhee J, Kubica E (2008) Multi-step forward dynamic gait simulation. In: Botasso CL (ed) Multibody dynamics—Computational methods in applied sciences, vol 12. Springer, Dordrecht, pp 25–43Google Scholar
  75. Monteiro N, Silva M, Folgado J, Melancia J (2011) Structural analysis of the intervertebral discs adjacent to an interbody fusion using multibody dynamics and finite element cosimulation. Multibody Sys Dyn 25(2):245–270CrossRefGoogle Scholar
  76. Moreau JJ (1979) Application of convex analysis to some problems of dry friction. In: Zorski H (ed) Trends in applications of pure mathematics to mechanics, vol 2. Pitman, London, pp 263–280Google Scholar
  77. Moreau JJ (1999) Numerical aspects of the sweeping process. Comput Meth Appl Mech Eng 177:329–349MathSciNetCrossRefzbMATHGoogle Scholar
  78. Moreira P (2009) Development of a three-dimensional contact model for the foot-ground interaction in gait simulations. MSc thesis, University of Minho, Guimarães, PortugalGoogle Scholar
  79. Moreira P, Silva M, Flores P (2010) A biomechanical multibody foot model for forward dynamic analysis. In: Proceedings of the 1st joint international conference on multibody dynamics, Lappeenranta, Finland, 25–27 May 2010, 10 pGoogle Scholar
  80. Muvengei O, Kihiu J, Ikua B (2012) Dynamic analysis of planar multi-body systems with LuGre friction at differently located revolute clearance joints. Multibody Sys Dyn 28(4):369–393MathSciNetCrossRefGoogle Scholar
  81. Najafabadi SAM, Kövecses J, Angeles J (2008) Impacts in multibody systems: modeling and experiments. Multibody Sys Dyn 20:163–176MathSciNetCrossRefzbMATHGoogle Scholar
  82. Nikravesh PE (1988) Computer-aided analysis of mechanical systems. Prentice Hall, Englewood CliffsGoogle Scholar
  83. Nikravesh PE (2008) Planar multibody dynamics: formulation, programming and applications. C&C PressGoogle Scholar
  84. Oden JT, Martins JAC (1985) Models and computational methods for dynamic friction phenomena. Comput Methods Appl Mech Eng 52:527–634MathSciNetCrossRefzbMATHGoogle Scholar
  85. Panagiotopoulos PD (1985) Inequality problems in mechanics and applications. In: Convex and nonconvex energy functionals. Birkhäuser-Verlag, Basel, Boston, StuttgartGoogle Scholar
  86. Pang J, Trinkle JC (1996) Complementarity formulations and existence of solutions of dynamic multi-rigid-body contact problems with Coulomb friction. Math Program 73(2):199–226MathSciNetCrossRefzbMATHGoogle Scholar
  87. Pang J-S, Stewart DE (2008) Differential variational inequalities. Math Program 113:345–424MathSciNetCrossRefzbMATHGoogle Scholar
  88. Peixoto J, Moura B, Moreira P, Souto AP, Flores P (2015) Development and early results of a new concept of an orthopedic footwear stirrup. In: New trends in mechanism and machine science, pp 699–707Google Scholar
  89. Pérez-González A, Fenollosa-Esteve C, Sancho-Bru JL, Sánchez-Marín FT, Vergara M, Rodríguez-Cervantes PJ (2008) A modified elastic foundation contact model for application in 3D models of the prosthetic knee. Med Eng Phys 30(3):387–398CrossRefGoogle Scholar
  90. Pfeiffer F (2003) The idea of complementarity in multibody dynamics. Arch Appl Mech 72(11–12):807–816zbMATHGoogle Scholar
  91. Pfeiffer F, Glocker C (1996) Multibody dynamics with unilateral constraints. Wiley, New YorkCrossRefzbMATHGoogle Scholar
  92. Rodriguez A, Bowling A (2012) Solution to indeterminate multipoint impact with frictional contact using constraints. Multibody Sys Dyn 28(4):313–330MathSciNetCrossRefGoogle Scholar
  93. Sharf I, Zhang Y (2006) A contact force solution for non-colliding contact dynamics simulation. Multibody Sys Dyn 16:263–290MathSciNetCrossRefzbMATHGoogle Scholar
  94. Signorini A (1933) Sopra alcune questioni di elastostatica. Atti della Societa Italian per il Progresso della ScienzaGoogle Scholar
  95. Silva P, Silva MT, Martins JM (2010) Evaluation of the contact forces developed in the lower limb/orthosis interface for comfort design. Multibody Sys Dyn 24(3):367–388CrossRefzbMATHGoogle Scholar
  96. Studer C, Leine RI, Glocker C (2008) Step size adjustment and extrapolation for time-stepping schemes in non-smooth dynamics. Int J Numer Meth Eng 76(11):1747–1781MathSciNetCrossRefzbMATHGoogle Scholar
  97. Tasora A, Negrut D, Anitescu A (2008) Large-scale parallel multi-body dynamics with frictional contact on the graphical processing unit. In: Proceedings of the Institution of Mechanical Engineers, Part-K. J Multi-body Dyn 222:315–326Google Scholar
  98. Tian Q, Sun Y, Liu C, Hu H, Flores P (2013) Elastohydrodynamic lubricated cylindrical joints for rigid-flexible multibody dynamics. Comput Struct 114:106–120CrossRefGoogle Scholar
  99. Tian Q, Xiao Q, Sun Y, Hu H, Liu H, Flores P (2015) Coupling dynamics of a geared multibody system supported by ElastoHydroDynamic lubricated cylindrical joints. Multibody Sys Dyn 33(3):259–284MathSciNetCrossRefGoogle Scholar
  100. Trinkle JC, Tzitzouris JA, Pang JS (2001) Dynamic multi-rigid-body systems with concurrent distributed contacts. Philos Trans Math Phys Eng Sci 359(1789):2575–2593MathSciNetCrossRefzbMATHGoogle Scholar
  101. Wismans J, Veldpaus F, Janssen JA (1980) A three-dimensional mathematical model of the knee joint. J Biomech 13(8):677–685CrossRefGoogle Scholar
  102. Wojtyra M (2009) Joint reactions in rigid body mechanisms with dependent constraints. Mech Mach Theory 44(12):2265–2278CrossRefzbMATHGoogle Scholar
  103. Wriggers P (2006) Computational contact mechanics, 2nd edn. Springer, BerlinCrossRefzbMATHGoogle Scholar
  104. Wu S-H, Tsai S-J (2009) Contact stress analysis of skew conical involute gear drives in approximate line contact. Mech Mach Theory 44(9):1658–1676CrossRefzbMATHGoogle Scholar
  105. Zhang Y, Sharf I (2009) Validation of nonlinear viscoelastic contact force models for low speed impact. J Appl Mech 76(5):051002CrossRefGoogle Scholar
  106. Zhang Z, Xu L, Flores P, Lankarani HM (2014) A Kriging Model for dynamics of mechanical systems with revolute joint clearances. J Comput Nonlinear Dyn 9(3):031013Google Scholar
  107. Zhu Y, Chen JX, Xiao S, MacMahon E (1999) 3D Knee modeling and biomechanical simulation. Comput Sci Eng 1(4):82–87CrossRefGoogle Scholar

Copyright information

© Springer International Publishing Switzerland 2016

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringUniversity of MinhoGuimaraesPortugal
  2. 2.Department of Mechanical EngineeringWichita State UniversityWichitaUSA

Personalised recommendations