Advertisement

Building Envelope–Systems Integrated Models: Topic 4

  • Fabio Conato
Conference paper

Abstract

The need to design building envelopes as machines able to offer flexible behaviors due to the variability of the boundary conditions has led to study and develop a methodology for evaluating the correct relationship between casings’ energy performances and production systems connected to technical implants. The result was the definition of an application model, able to indicate the most appropriate mix of renewable energies in synergy with the casing. The objective is to maximize the use of renewable energies in compliance with general and functional needs related to the balance of the system.

The study started from the identification and classification of types and families of building envelope, defining materials and operating principles. The simulations used in the assessment models were performed by integrating empirical data with predictive modeling.

The matrix produced was implemented starting from the scenario of the typical needs of each building typology and of every function of it, making possible to evaluate in a forecasting way the variation of primary energy use depending on the performances of each solutions of envelopes.

At the end of this consideration, the model produced was applied to two pilot projects, that constitute the most meaningful product of this research.

Keywords

Building envelope Renewable energies Technological systems 

Copyright information

© Springer International Publishing Switzerland 2017

<SimplePara><Emphasis Type="Bold">Open Access</Emphasis> This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. </SimplePara> <SimplePara>The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.</SimplePara>

Authors and Affiliations

  1. 1.Department of ArchitectureUniversity of FerraraFerraraItaly

Personalised recommendations