Advertisement

Optimal Control for Viscoelastic Robots and Its Generalization in Real-Time

  • Sami Haddadin
  • Roman Weitschat
  • Felix Huber
  • Mehmet Can Özparpucu
  • Nico Mansfeld
  • Alin Albu-Schäffer
Chapter
Part of the Springer Tracts in Advanced Robotics book series (STAR, volume 114)

Abstract

Inspired by the elasticity contained in human muscles and tendons, viscoelastic joints are designed with the aim of imitating human motions by exploiting their ability to mechanically store and release potential energy. This distinct feature makes elastic robots especially interesting to the application of optimal control principles, as generating such motions is not possible by data-driven paradigms. In particular, reaching peak velocities by using the stored energy in the springs is of great interest, as such capabilities might open up entirely new application domains. In this paper, we review our results on solving various optimal control problems for elastic joints and full scale robot arms, as well as the experimental validation. Clearly, solving optimal control problems for highly nonlinear full robot dynamics is feasible nowadays only numerically, i.e. offline. In turn, optimal solutions would only contribute a clear benefit for real tasks, if they would be accessible/generalizable in real-time. For this, we developed a framework for executing near-optimal motions of elastic robot arms in real-time. In contrast to existing approaches, we use dynamically optimal motions (i.e. offline solutions of optimal control problems) as given learning input and then apply generalization via Dynamic Movement Primitives (DMPs). With this approach, we intend to overcome the well-known problems of optimal control and data-driven learning with associated generalization: being offline and being suboptimal (In fact, data-driven approaches can only be applied if the solution is already quite obvious for the human teacher. In case of highly nonlinear problems these “intuitive” initial solutions are typically not available.), respectively.

Keywords

Optimal Control Problem Optimal Trajectory Joint Torque Switching Curve Joint Elasticity 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Notes

Acknowledgments

This work has been partially funded by the European Commission’s Sixth Framework Programme as part of the project SAPHARI under grant no. 287513.

References

  1. 1.
    Albu-Schäffer, A., Eiberger, O., Grebenstein, M., Haddadin, S., Ott, C., Wimböck, T., Wolf, S., Hirzinger, G.: Soft robotics: From torque feedback controlled lightweight robots to intrinsically compliant systems. IEEE Robot. Autom. Mag.: Spec. Issue Adapt Compliance/Var. Stiffness Robot. Appl. 15(3):20–30 (2008)Google Scholar
  2. 2.
    Biagiotti, L., Melchiorri, C.: Trajectory Planning for Automatic Machines and Robots. Springer, Berlin (2008)Google Scholar
  3. 3.
    Bicchi, A., Tonietti, G.: Fast and soft arm tactics: Dealing with the safety-performance trade-off in robot arms design and control. IEEE Robot. Autom. Mag. 11, 22–33 (2004)CrossRefGoogle Scholar
  4. 4.
    Billard, A., Calinon, S., Dillmann, R., Schaal, S.: Robot programming by demonstration. Handbook of Robotics, Chap 59 (2008)Google Scholar
  5. 5.
    Bobrow, J.E., Dubowsky, S., Gibson, J.S.: Time-optimal control of robotic manipulators along specified paths. Int. J. Robot. Res. 4(3), 3–17 (1985)Google Scholar
  6. 6.
    Braun, D., Howard, M., Vijayakumar, S.: Exploiting variable stiffness in explosive movement tasks. In: Robotics: Science and Systems (2011)Google Scholar
  7. 7.
    Choset, H., Lynch, K.M., Hutchinson, S., Kantor, G., Burgard, W., Thrun, S., Kavraki, L.E.: Principles of Robot Motion: Theory, Algroithms, and Implementation. MIT Press, Cambridge (2005)MATHGoogle Scholar
  8. 8.
    Eiberger, O., Haddadin, S., Weis, M., Albu-Schäffer, A., Hirzinger, G.: On joint design with intrinsic variable compliance: Derivation of the DLR QA-joint. IEEE International Conference on Robotics and Automation, pp. 1687–1694 (2010)Google Scholar
  9. 9.
    Gams, A., Petric, T., Zlajpah, L., Ude, A.: Optimizing parameters of trajectory representation for movement generalization: robotic throwing. In: Proceedings of IEEE 19th International Workshop on Robotics in Alpe-Adria-Danube Region, pp. 161–166 (2010)Google Scholar
  10. 10.
    Garabini, M., Passaglia, A., Belo, F.A.W., Salaris, P., Bicchi, A.: Optimality principles in variable stiffness control: the vsa hammer. In: Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3770–3775 (2011)Google Scholar
  11. 11.
    Haddadin, S., Huber, F., Albu-Schäffer, A.: Optimal control for exploiting the natural dynamics of variable stiffness robots. In IEEE International Conference on Robotics and Automation, pp. 3347–3354 (2012)Google Scholar
  12. 12.
    Haddadin, S., Krieger, K., Mansfeld, N., Albu-Schäffer, A.: On impact decoupling properties of elastic robots and time optimal velocity maximization on joint level. In IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 5089–5096 (2012)Google Scholar
  13. 13.
    Haddadin, S., Weis, M., Wolf, S., Albu-Schäffer, A.: Optimal control for maximizing link velocity of robotic variable stiffness joints. In: Proceedings of IFAC World Congress, pp. 6863–6871 (2011)Google Scholar
  14. 14.
    Haddadin, S., Laue, T., Frese, U., Wolf, S., Albu-Schäffer, A., Hirzinger, G.: Kick it with elasticity: requirements for 2050. Robot. Auton. Syst. 57, 761–775 (2009)Google Scholar
  15. 15.
    Haddadin, S., Özparpucu, M.C., Albu-Schäffer, A.: Optimal control for maximizing potential energy in a variable stiffness joint. In IEEE Conference on Decision and Control, pp. 1199–1206 (2012)Google Scholar
  16. 16.
    Ijspeert, J.A., Nakanishi, J., Schaal. S.: Learning rhythmic movements by demonstration using nonlinear oscillators. In IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 958–963 (2002)Google Scholar
  17. 17.
    Jetchev, N., Toussaint, M.: Trajectory prediction: learning to map situations to robot trajectories. In International Conference on Machine Learning, pp. 449–456 (2009)Google Scholar
  18. 18.
    Kavraki, L.E., Svestka, P., Latombe, J.C., Overmars, M.H.: Probabilistic roadmaps for path planning in high-dimensional configuration spaces. IEEE Trans. Robot. Autom. 12(4), 566–580 (1996)CrossRefGoogle Scholar
  19. 19.
    Lampariello, R., Nguyen-Tuong, D., Castellini, C., Hirzinger, G., Peters, J.: Trajectory planning for optimal robot catching in real-time. In IEEE International Conference on Robotics and Automation, pp. 3719–3726 (2011)Google Scholar
  20. 20.
    LaValle, S.M., Kuffner, J.J Jr.: Randomized kinodynamic planning. In IEEE Internatuinal Conference on Robotics and Automation, pp. 473–479 (1999)Google Scholar
  21. 21.
    Mettin, U., Shiriaev, A.: Ball-pitching challenge with an underactuated two-link robot arm. In: Proceedings of IFAC World Congress, pp. 1–6 (2011)Google Scholar
  22. 22.
    Özparpucu, M.C., Haddadin, S.: Optimal control for maximizing link velocity of a visco-elastic joint. In IEEE/RSJ Int. Conference on Intelligent Robots and Systems, pp. 3035–3042 (2013)Google Scholar
  23. 23.
    Park, D-H., Hoffmann, H., Pastor, P., Schaal, S.: Movement reproduction and obstacle avoidance with dynamic movement primitives and potential fields. IEEE-RAS International Conference on Humanoid Robots, pp. 91–98 (2008)Google Scholar
  24. 24.
    Rao, A.V., Benson, D.A., Darby, C.L., Patternson, M.A., Francolin, C., Sanders, I., Huntington, G.T.: Algorithm 902: Gpops, a matlab software for solving multiple-phase optimal control problems using the gauss pseudospectral method. ACM Trans. Math. Softw. 22–60(2), 39 (2010)Google Scholar
  25. 25.
    Shin, K.G., McKay, N.D.: Minimum-time control of robotics manipulators with geometric path constraints. IEEE Trans. Autom. Control 30(6), 531–541 (1985)CrossRefMATHGoogle Scholar
  26. 26.
    Stark, A.: A Study of Business Decisions under Uncertainty: The Probability of the Improbable. Ph.D thesis, Boca Racon, USA Florida (2010)Google Scholar
  27. 27.
    Stulp, F., Oztop, E., Pastor, P., Beetz, M., Schaal, S.: Compact models of motor primitive variations for predictible reaching and obstacle avoidance. In IEEE-RAS International Conference on Humanoid Robots, pp. 589–595 (2009)Google Scholar
  28. 28.
    Todorov., Li, W.: A generalized iterative LQG method for locally-optimal feedback control of constrained nonlinear stochastic systems. In: Proceedings of the 2005 American Control Conference, pp. 300–306 (2005)Google Scholar
  29. 29.
    Stryk, O.V., Schlemmer, M.: Optimal control of the industrial robot manutec r3. Computational Optimal Control. International Series of Numerical Mathematics 115Google Scholar
  30. 30.
    van Ham, R., Sugar, T., Vanderborgth, B., Hollander, K., Lefeber, D.: Compliant actuator designs: Review of actuators with passive adjustable compliance/controllable stiffness for robotic applications. IEEE Robot. Autom. Mag. 16(3), 81–94 (2009)CrossRefGoogle Scholar
  31. 31.
    Weitschat, R., Haddadin, S., Huber, F., Albu-Schäffer, A.: Dynamic optimality in real-time: A learning framework for near-optimal robot motions. In IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 5636–5643 (2013)Google Scholar

Copyright information

© Springer International Publishing Switzerland 2016

Authors and Affiliations

  • Sami Haddadin
    • 1
  • Roman Weitschat
    • 2
  • Felix Huber
    • 2
  • Mehmet Can Özparpucu
    • 2
  • Nico Mansfeld
    • 2
  • Alin Albu-Schäffer
    • 2
  1. 1.Institute of Automatic ControlLeibniz Universität HannoverHanoverGermany
  2. 2.RMCWesslingGermany

Personalised recommendations