Abstract
Detectors of presence indicate position of an object at a selected position or within a predefined system of coordinates. By definition, the presence detector is a static, time invariant device.
Keywords
Magnetic Flux Fiber Bragg Grating Eddy Current Displacement Sensor Liquid Level
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
- 1.Wilkinson, P., et al. (2008). Nanomechanical properties of piezoresistive cantilevers: Theory and experiment. Journal of Applied Physics, 104, 103527.CrossRefGoogle Scholar
- 2.Cullinan, M., et al. (2010). Carbon nanotubes as piezoresistive microelectromechanical sensors: Theory and experiment. Physical Review, B82, 115428.CrossRefGoogle Scholar
- 3.Young, D., et al. (1996, June). A micromachined variable capacitor for monolithic low-noise VCOs. Solid-State Sensor and Actuator Workshop. Hilton Head, SC.Google Scholar
- 4.Barker, M. J., et al. (1997). A two-dimensional capacitive position transducer with rotation output. Review of Scientific Instruments, 68(8), 3238–3240.CrossRefGoogle Scholar
- 5.Peters, R. D. (1994, November 3). Symmetric differential capacitance transducer employing cross coupled conductive plates to form equipotential pairs. U.S. Patent No. 5461319.Google Scholar
- 6.De Silva, C. W. (1989). Control sensors and actuators. Englewood Cliffs, NJ: Prentice Hall.Google Scholar
- 7.Bruce, R. (1984, February 7). Loop detector for traffic signal control. U.S. Patent No. 4430636.Google Scholar
- 8.Lees, R. H. (2002, January 8). Inductive loop sensor for traffic detection. U.S. Patent No. 6337640.Google Scholar
- 9.Hall effect sensing and application. Honeywell, Inc. www.honeywell.com/sensing
- 10.Popovic, R. S., et al. (2002). Hall ASICs with integrated magnetic concentrators. Proceedings of the Sensors Expo & Conference, Boston, USA.Google Scholar
- 11.Palumbo, V., et al. (2013). Hall current sensor IC with integrated Co-based alloy thin film magnetic concentrator. EPJ Web of Conferences 40, 16002.Google Scholar
- 12.Born, M., et al. (1984). Principles of optics (6th ed.). London: Pergamon.Google Scholar
- 13.Lee, C. E., et al. (1991). Fiber-optic Fabry-Perot temperature sensor using a low-coherence light source. Journal of Lightwave Technology, 9, 129–134.CrossRefGoogle Scholar
- 14.Wolthuis, R. A., et al. (1991). Development of medical pressure and temperature sensors employing optical spectrum modulation. IEEE Transactions on Biomedical Engineering, 38, 974–980.CrossRefGoogle Scholar
- 15.Hill, K. O., et al. (1978). Photosensitivity in optical fiber waveguides: Application to reflection fiber fabrication. Applied Physics Letters, 32(10), 647.CrossRefGoogle Scholar
- 16.Spillman, W. B., Jr. (1981). Multimode fiber-optic hydrophone based on a schlieren technique. Applied Optics, 20, 465.CrossRefGoogle Scholar
- 17.In-Depth Ablative Plug Transducers (1992). Series #S-2835, Hycal Engineering, 9650 Telstar Avenue, P. O. Box 5488, El Monte, California.Google Scholar
- 18.Noffz, G. K., et al. (1996). Design and laboratory validation of a capacitive sensor for measuring the recession of a thin-layered ablator. NASA Technical Memorandum 4777.Google Scholar
- 19.Brown, R. C., et al. (1978). The use of wire probes for the measurement of liquid film thickness in annular gas-liquid flows. The Canadian Journal of Chemical Engineering, 56, 754–757.CrossRefGoogle Scholar
- 20.Graham, J., et al. (2000). Capacitance based scanner for thickness mapping of thin dielectric films. Review of Scientific Instruments, 71(5), 2219–2223.CrossRefGoogle Scholar
- 21.Brusch, L., et al. (1999). Level meter for dielectric liquids. Review of Scientific Instruments, 70 (2), 1514.CrossRefGoogle Scholar
Copyright information
© Springer International Publishing Switzerland 2016