Abstract
The pressure concept was primarily based on the pioneering work of Evangelista Torricelli who for a short time was a student of Galileo. During his experiments with mercury-filled dishes, in 1643, he realized that the atmosphere exerts pressure on earth [1]. A great French experimenter Blaise Pascal, in 1647, conducted an experiment with the help of his brother-in-law, Perier, on the top of the mountain Puy-de-Dôme and at its base. He observed that pressure exerted on the column of mercury depends on elevation. He named a mercury-in-vacuum instrument they used in the experiment the . In 1660, Robert Boyle stated his famous relationship:
Keywords
Pressure Sensor Temperature Compensation Heated Plate Capacitive Sensor Capacitive Pressure Sensor
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
- 1.Benedict, R. P. (1984). Fundamentals of temperature, pressure, and flow measurements (3rd ed.). New York, NY: John Wiley & Sons.CrossRefGoogle Scholar
- 2.Clark, S. K., et al. (1979). Pressure sensitivity in anisotropically etched thin-diaphragm pressure sensor. IEEE Transactions on Electron Devices, ED-26, 1887–1896.CrossRefGoogle Scholar
- 3.Kurtz, A. D., et al. (1967). Semiconductor transducers using transverse and shear piezoresistance. Proceedings of the 22nd ISA Conference, No. P4-1 PHYMMID-67, September 1967.Google Scholar
- 4.Tanigawa, H., et al. (1985). MOS integrated silicon pressure sensor. IEEE Transactions on Electron Devices, ED-32(7), 1191–1195.CrossRefGoogle Scholar
- 5.Petersen, K., et al. (1998). Silicon fusion bonding for pressure sensors. Rec. of the IEEE Solid-state sensor and actuator workshop (pp. 144–147).Google Scholar
- 6.Peng, K. H., et al. (2004). The temperature compensation of the silicon piezo-resistive pressure sensor using the half-bridge technique. In Tanner DM, Ramesham R (Eds.) Reliability, testing, and characterization of MEMS/MOEMS III, Proc. SPIE. Vol. 5343.Google Scholar
- 7.Wolthuis, R., et al. (1991). Development of medical pressure and temperature sensors employing optical spectral modulation. IEEE Transactions on Bio-medical Engineering, 38(10), 974–981.CrossRefGoogle Scholar
- 8.Hälg, B. (1991). A silicon pressure sensor with an interferometric optical readout. In: Transducers'91. International conference on solid-state sensors and actuators. Digest of technical papers (pp. 682–684). IEEE.Google Scholar
- 9.Vaughan, J. M. (1989). The Fabry-Perot interferometers. Bristol: Adam Hilger.Google Scholar
- 10.Saaski, E.W., et al. (1989). A fiber optic sensing system based on spectral modulation. Paper #86-2803, ©ISA.Google Scholar
- 11.Fraden, J. (2009). Detector of low levels of gas pressure and flow. U.S. Patent No. 7,490,512. February 17, 2009.Google Scholar
- 12.von Pirani, M. (1906). Selbszeigendes vakuum-mefsinstrument. Verhandlungen der Deutschen Physikalischen Gesellschaft, 1906, 686–694.Google Scholar
- 13.Von Smoluchovski, M. (1911). Zur theorie der warmteleitung in verdunnten gasen und der dabei auftretenden druckkrafte. Annalen der Physik, 35, 983–1004.CrossRefGoogle Scholar
- 14.Leck, J. H. (1964). Pressure measurement in vacuum systems (2nd ed.). London: Chapman & Hall.Google Scholar
- 15.Bayard, R. T., et al. (1950). Extension of the low pressure range of the ionization gauge. Review of Scientific Instruments, 21, 571. American Institute of Physics.CrossRefGoogle Scholar
- 16.Fremery, J. K. (1946). Vacuum, 32, 685.CrossRefGoogle Scholar
- 17.Looney, J. P., et al. (1994). PC-based spinning rotor gage controller. Review of Scientific Instruments, 65(9), 3012.CrossRefGoogle Scholar
- 18.Zhang Y., et al. (2001). An ultra-sensitive high-vacuum absolute capacitive pressure sensor. In: 14th IEEE international conference on micro electro mechanical systems. (Cat. No. 01CH37090). Technical Digest, pp: 166–169.Google Scholar
Copyright information
© Springer International Publishing Switzerland 2016