Advertisement

Simulation Analysis of Self-balancing Chassis Based on ADMAS Software

  • Liu YangEmail author
  • Shunan Liu
  • Li Liu
Conference paper
  • 12 Downloads
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 1146)

Abstract

Research and analysis a self-balancing obstacle-crossing vehicle to walk on unstructured and complex ground. In this paper, the overall design scheme is analyzed, and the innovative points of the design research are put forward. The mechanical structure of self-balancing obstacle-crossing chassis was designed, modeled and assembled by using CATIA three-dimensional drawing software. The results of the final datas show that the strength and stiffness of the model design system meet the requirements of static design. The simulation results of ADAMS show that the maximum obstacle-crossing height is 210 mm and the maximum swing angle of swing arm is 37.2°, which verifies that the data designed in this paper meets the original design requirements.

Keywords

Self-balancing Obstacle surmounting Finite element analysis ADAMS Simulation analysis 

Notes

Acknowledgements

This work was supported by Changchun University of science and Technology Youth start-up fund project (CCKJ201704).

References

  1. 1.
    Lv, Q., Yang, L.: Modeling and design of a new type of self-balancing obstacle vehicle. In: International Conference on Chemical, Material and Food Engineering (CMFE 2015), August 2015Google Scholar
  2. 2.
    Zheng, H., Wang, M., Wang, X., Wang, C.: Design and kinematics analysis of wheel-leg hybrid quadruped robot. Mech. Transm. 01, 57–61 (2015)Google Scholar
  3. 3.
    Chen, D., Huang, Y., Wang, T.: Barrier-crossing analysis and Simulation of wheeled legged robots. J. Beijing Univ. Aeronaut. Astronaut. 03, 371–375 (2009)Google Scholar
  4. 4.
    Chen, C., Xiang, H., Yang, K., Ye, C.: Dynamic analysis of deformable crawler robot crossing steps. J. Shenyang Univ. Technol. 02, 165–170 (2015)Google Scholar
  5. 5.
    Chen, S., Chen, W.: Review of tracked mobile robots. Electromech. Eng. 12, 109–112 (2007)Google Scholar
  6. 6.
    Meihong, Li, Y., Li, W.: A mobile robot with the ability to climb and surmount obstacles. Mach. Tools Hydraul. Pressures 22, 14–16 (2013)Google Scholar
  7. 7.
    Gao, Y., Liu, X.: 50 cases of ANSYS mechanical application essence. Electronic Industry Publishing House (2010)Google Scholar
  8. 8.
    Yin, Z., Song and Tang Dynasties, Hu, Y., Zhou, H.: Design of self-balancing car experimental device. Neijiang Sci. Technol. 39(09), 38–39+96 (2018)Google Scholar
  9. 9.
    Dai, W., Chen, F., Zhang, Y.: Control simulation of self-balancing vehicle system based on ADAMS and MATLAB. Sci. Technol. Innov. (20), 54–57 (2018)Google Scholar
  10. 10.
    Qiu, G., Huang, L., Deng, M., Wang, X., Hu, S.: A self-balancing two-wheeled electric vehicle design. Comput. Knowl. Technol. 13(36), 170–173 (2017)Google Scholar
  11. 11.
    Guo, G., Yan, C., Tian, H.: Focusing mechanism design and finite element analysis of on-board optical remote sensor. J. Changchun Univ. Technol. (Nat. Sci. Ed.) 41(03), 30–33 (2018)Google Scholar
  12. 12.
    Gong, L., Yang, P., Shentao, Zheng, H., Zhang, S.: Research on the upright walking of two-wheeled self-balancing intelligent vehicle. Electron. Des. Eng. 25(22), 145–148 (2017)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.College of Intelligent Manufacturing, Changchun SCI-TECH UniversityChangchunChina

Personalised recommendations