Advertisement

Data Management in “Scan to HBIM” Projects

  • Manuel Sánchez-FernándezEmail author
  • Francisco Javier Chorro
  • María-José Marín
  • José Juan de Sanjosé-Blasco
  • Luis Francisco Martínez
Conference paper
  • 122 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Heritage management and conservation is one of the challenges facing society today. The management and conservation model has evolved in recent years thanks to technological evolution. When carrying out a heritage conservation project, there are fundamental elements for a correct development, one is the geometry of the element and the other is the conceptualization of the project from the geometry. In the last decade, techniques have been developed that allow architectural surveys of buildings and infrastructures with a high level of detail. Among the techniques mentioned are terrestrial photogrammetry and terrestrial laser scanners, both with the ability to generate a high-precision, high-resolution 3D metric model. The 3D model obtained sows the geometric base for the development of a conservation or intervention project using the Building Information Modeling (BIM) methodology. By means of the execution of a project the management of the information of the data obtained with terrestrial laser scanner is studied for its later modeling in the software BIM Autodeskt Revit®, applied to the mode-side of two cloths of wall in the cities of Cáceres and Badajoz for the management and conservation of the patrimony.

Keywords

Laser scanning Architectural survey Conservation Heritage Heritage Building Information Modeling (HBIM) 

Notes

Acknowledgements

The presentation of this work has been possible thanks to the financing granted by the European Regional Development Fund of the European Union and the Regional Government of Extremadura to the NEXUS research group through the GR18053 aid and to the IB16115 research project in public R&D&I centres thanks to the European Regional Development Funds and the Regional Government of Extremadura.

References

  1. 1.
    Rebolj, D., Pučko, Z., Babič, N.Č., Bizjak, M., Mongus, D.: Point cloud quality requirements for Scan-vs-BIM based automated construction progress monitoring. Autom. Constr. 84, 323–334 (2017)CrossRefGoogle Scholar
  2. 2.
    Baik, A.: From point cloud to jeddah heritage BIM nasif historical house–case study. Dig. Appl. Archaeol. Cult. Heritage 4, 1–18 (2017)Google Scholar
  3. 3.
    Khodeir, L.M., Aly, D., Tarek, S.: Integrating HBIM (Heritage Building Information Modeling) tools in the application of sustainable retrofitting of heritage buildings in Egypt. Procedia Environ. Sci. 34, 258–270 (2016)CrossRefGoogle Scholar
  4. 4.
    Fernández, M.S., Blasco, J.J.S., Mogollón, F.-J.G., García, E.M.: Sistemas de información geográfica aplicados al inventario, catalogación y gestión de infraestructuras patrimoniales en Extremadura. In: IV Reunión del Grupo de Arte Contemporáneo del GEIIC: (Grupo Español del International Institute of Conservation), pp. 358–363 (2018)Google Scholar
  5. 5.
  6. 6.
    Berenguer Sempere, F.: Aplicación de técnicas geodésicas y técnicas avanzadas de captura, escáner láser y termografía, en el estudio patológico de la estructura y la cimentación en la restauración integral de la Catedral de Santa María de la Asunción de Coria. Doctoral Thesis, Expresión Gráfica, Extremadura (2014). http://hdl.handle.net/10662/1622
  7. 7.
    Borrazás, P.M., Blanco-Rotea, R., Rodríguez Paz, A.: La documentación geométrica de elementos patrimoniales con láser escáner terrestre. La experiencia del Lapa en Galicia. Cuadernos de Estudios Gallegos 56(122), 33–65 (2009)CrossRefGoogle Scholar
  8. 8.
    Serrano, F., Saumell, J., Berenguer, F.: XXX Análisis de resultados métricos de una nube de puntos y una medición directa en el patrimonio edificado. El Santuario de La Montaña en Cáceres. Informes de la Construcción 66 (2014)Google Scholar
  9. 9.
  10. 10.
    RealWorks, TRIMBLE, Ed., 10.4 ed. (2017). http://www.trimble.com/3d-laser-scanning/realworks.aspx
  11. 11.
    BIM Forum: Forum: LOD Specification Volume Part I (2019)Google Scholar
  12. 12.
    Chorro-Domínguez, F.J., Marín-Miranda, M.J., Cortés, J.P.: Revit family from point cloud in heritage elements. the almohade gate. In: Presented at the APEGA 2019, Sevilla (2019)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Manuel Sánchez-Fernández
    • 1
    Email author
  • Francisco Javier Chorro
    • 1
  • María-José Marín
    • 1
  • José Juan de Sanjosé-Blasco
    • 1
  • Luis Francisco Martínez
    • 1
  1. 1.INTERRA Research Institute, NEXUS Research Group, University of ExtremaduraCáceresSpain

Personalised recommendations