Advertisement

The Analysis of Pathologies in the Church of San Ildefonso in Salorino (Cáceres) Using Geomatic Techniques

  • José Juan de Sanjosé BlascoEmail author
  • Manuel Sánchez-Fernández
  • Alan D. J. Atkinson
  • Angel M. Marra Recuero
Conference paper
  • 121 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Buildings and other infrastructures suffer degradation over time and rehabilitation work to make improvements or for a change in use poses different challenges than those that are built anew. Appropriate measures must be taken to ensure that surrounding buildings and infrastructures are not altered. This paper studies the pathologies found in the parish church of San Ildefonso in Salorino (Cáceres) during remodeling work carried out in 2005 on the square surrounding it. The study uses geometric auscultation of the building using the comparison of geomatic techniques (terrestrial laser scanner, short-range scanner, high precision levelling and fissurometer) to assess the dynamic of the pathology. Geomatic measurements were first taken (November 2016 and April 2017) and later applied to the restoration work (July 2018). No significant movements were detected.

Keywords

Pathologies Geomatic techniques 3D modeling 

Notes

Acknowledgements

This study was made possible thanks to financing granted by the European Fund for Regional Development of the European Union and the Junta de Extremadura to the NEXUS research group through the GR18053 support.

References

  1. 1.
    Salorino (2018). http://www.salorino.es/
  2. 2.
    Berenguer, F.: Aplicación de técnicas geodésicas y técnicas avanzadas de captura, escáner láser y termografía, en el estudio patológico de la estructura y la cimentación en la restauración integral de la Catedral de Santa María de la Asunción de Coria. In: Expresión Gráfica, Extremadura, p. 258 (2014). http://hdl.handle.net/10662/1622
  3. 3.
    Borrazás, P.M., Blancorotea, R., Rodríguez Paz, A.: La documentación geométrica de elementos patrimoniales con láser escáner terrestre. La experiencia del Lapa en Galicia. Cuadernos de Estudios Gallegos 56(122), 33–65 (2009)CrossRefGoogle Scholar
  4. 4.
    Serrano, F., Saumell, J., Berenguer, F.: Análisis de resultados métricos de una nube de puntos y una medición directa en el patrimonio edificado. El Santuario de La Montaña en Cáceres. Informes de la Construcción 66(534), 016 (2014)CrossRefGoogle Scholar
  5. 5.
    Acikgoz, S., Pelecanos, L., Giardina, G., Aitken, J., Soga, K.: Distributed sensing of a masonry vault during nearby piling. Struct. Control Health Monit. 24(3), e1872 (2017)CrossRefGoogle Scholar
  6. 6.
    Monserrat, O., Crosetto, M.: Deformation measurement using terrestrial laser scanning data and least squares 3D surface matching. ISPRS J. Photogramm. Remote Sens. 63(1), 142–154 (2008)CrossRefGoogle Scholar
  7. 7.
  8. 8.

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • José Juan de Sanjosé Blasco
    • 1
    Email author
  • Manuel Sánchez-Fernández
    • 1
  • Alan D. J. Atkinson
    • 1
  • Angel M. Marra Recuero
    • 1
  1. 1.INTERRA Research Institute, NEXUS Research Group, University of ExtremaduraCáceresSpain

Personalised recommendations