Advertisement

A Galerkin Approach for Modelling the Pantograph-Catenary Interaction

  • John MartinEmail author
  • Stephen Duncan
Conference paper
  • 11 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The pantograph-catenary interaction was modelled for high-speed electric and hybrid trains. A lumped-mass pantograph model was used and the overhead wires were modelled as Euler-Bernoulli beams. Each vertical and horizontal wire deflection was decomposed into an infinite series of spatial basis functions, which were chosen to be the eigenmodes of the Euler-Bernoulli PDE, and corresponding time functions. The boundary conditions were used to evaluate the spatial basis functions and reduce the PDEs to ODEs in terms of the time functions. Elimination of variables was used to remove the algebraic contact constraints and reduce the overall index-three DAE to an ODE. This linear, time-varying ODE was solved by integration and the elimination process was reversed in order to recover the original states. The Simulink model was validated against the 2002 and 2018 European Standards, BS:EN 50318:2002 and BS:EN 50318:2018 respectively. In both cases, the model produced accurate results with exceptional simulation speeds.

References

  1. 1.
    Ambrósio, J., Pombo, J., Pereira, M., Antunes, P., Mósca, A.: A computational procedure for the dynamic analysis of the catenary-pantograph interaction in high-speed trains. J. Theor. Appl. Mech. 50(3), 681–699 (2012)Google Scholar
  2. 2.
    Benet, J., Alberto, A., Arias, E., Rojo, T.: A mathematical model of the pantograph-catenary dynamic interaction with several contact wires. Int. J. Appl. Math. 37(2) (2007) Google Scholar
  3. 3.
    Bruni, S., Ambrosio, J., Carnicero, A., Cho, Y.H., Finner, L., Ikeda, M., Kwon, S.Y., Massat, J.P., Stichel, S., Tur, M., et al.: The results of the pantograph-catenary interaction benchmark. Veh. Syst. Dyn. 53(3), 412–435 (2015)CrossRefGoogle Scholar
  4. 4.
    Dahlberg, T.: Moving force on an axially loaded beam—with applications to a railway overhead contact wire. Veh. Syst. Dyn. 44(8), 631–644 (2006)CrossRefGoogle Scholar
  5. 5.
    Gear, C.W., Leimkuhler, B., Gupta, G.K.: Automatic integration of Euler-Lagrange equations with constraints. J. Comput. Appl. Math. 12, 77–90 (1985)MathSciNetCrossRefGoogle Scholar
  6. 6.
    Mantegazza, P., Masarati, P.: Analysis of systems of differential-algebraic equations (DAE). Graduate Course on “Multibody System Dynamics” (2012)Google Scholar
  7. 7.
    Pombo, J., Ambrósio, J., Pereira, M., Rauter, F., Collina, A., Facchinetti, A.: Influence of the aerodynamic forces on the pantograph-catenary system for high-speed trains. Veh. Syst. Dyn. 47(11), 1327–1347 (2009)CrossRefGoogle Scholar
  8. 8.
    Seo, J.H., Sugiyama, H., Shabana, A.A.: Three-dimensional large deformation analysis of the multibody pantograph/catenary systems. Nonlinear Dyn. 42(2), 199–215 (2005)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Department of Engineering ScienceUniversity of OxfordOxfordUK

Personalised recommendations