Advertisement

Calculating Effects of Dressing Parameters on Surface Roughness in Surface Grinding

  • Do Duc Trung
  • Nguyen Hong Son
  • Tran Thi Hong
  • Nguyen Van Cuong
  • Ngoc Pi VuEmail author
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 104)

Abstract

In this paper, the influences of the surface grinding parameters including the dressing parameters, the grinding wheel velocity, the workpiece velocity, the depth of cut on the surface roughness are investigated. In the study, the influence of dressing parameters on surface roughness was pointed out theoretically. Also, it was found from the study results that the dressing factors have significant effects on the surface roughness. In addition, to evaluate the impacts of the dressing parameters on the surface roughness, an experiment was designed and performed. The measurement surface roughness from the experiment are in accordance with the calculated values.

Keywords

Grinding Surface roughness Dressing parameters 

Notes

Acknowledgements

The work described in this paper was supported by Ha Noi university of Industry and Thai Nguyen University of Technology.

References

  1. 1.
    Marinescu, L.D., Uhlmann, E., Brian Rowe, W.: Handbook of Machining with Grinding Wheels. CRC Press Taylor & Francis Group (2006)Google Scholar
  2. 2.
    Trung, D.D.: Study on identifying the machining parameters in centerless grinding of the 20X-carbon infiltrated steel to reduce its roundness error and surface roughness. The thesis completed at Thai Nguyen University of Technology (2016)Google Scholar
  3. 3.
    Marinescu, L.D., Hitchiner, M.: Handbook of Advances Ceramics Machining (2006). http://www.taylorandfrancis.com
  4. 4.
    Malkin, S.: Grinding Technology - Theory and Applications of Machining with Abrasives. Ellis Horwood – Chichester (1989)Google Scholar
  5. 5.
    Trung, D.D., Van Thien, N., Dung, H.T.: Predictive surface roughness of workpiece in surface grinding. Am. J. Mater. Res. 4, 37–41 (2017)Google Scholar
  6. 6.
    Trung, D.D., Son, P.X.: Predictive surface roughness of workpiece in cylindrical grinding. In: The First International Conference on Material, Machines and Methods for Sustainable Development, vol. 2, pp. 831–837 (2018)Google Scholar
  7. 7.
    Malkin, S., Guo, C.: Grinding Technology - Theory and Applications of Machining with Abrasives, 2nd edn. Industrial Press, New York (2008)Google Scholar
  8. 8.
    Saad, A., Bauer, R., Warkentin, A.: Investigation of single-point dressing overlap ration and diamond-roll dressing interference angle on surface roughness in grinding. Trans. Can. Soc. Mech. Eng. 34(2), 295–308 (2010)CrossRefGoogle Scholar
  9. 9.
    Gopal, A.V., Rao, P.V.: A new chip-thickness model for performance assessment of silicon carbide grinding. Int. J. Adv. Manuf. Technol. 24, 816–820 (2004)CrossRefGoogle Scholar
  10. 10.
    Mayer, J.E., Fang, G.P.: Effect of grit depth of cut on strength of ground ceramics. Ann. CIRP 43, 309–312 (1994)CrossRefGoogle Scholar
  11. 11.
    Somasundaram, S., Thiagarajan, C.: Experimental evaluation of a chip thickness model based on the fracture toughness of abrasive and work material in grinding of alumina ceramics. Int. J. Mod. Eng. Res. 3(6), 3825–3829 (2013)Google Scholar
  12. 12.
    Xu, H., Jahanmir, S., Ives, L.K.: Effect of grinding on strength of tetragonal zirconia and zirconia-toughned alumina. J. Mach. Sci. Technol. 1, 49–66 (1997)CrossRefGoogle Scholar
  13. 13.
    Zhang, P., Miller, M.H.: Grinding Wheel Condition Prediction and Improvement. Michigan Technological University, Houghton, MI (2002)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Do Duc Trung
    • 1
  • Nguyen Hong Son
    • 2
  • Tran Thi Hong
    • 3
  • Nguyen Van Cuong
    • 4
  • Ngoc Pi Vu
    • 5
    Email author
  1. 1.Faculty of Mechanical EngineeringHanoi University of IndustryHanoiVietnam
  2. 2.Center for Mechanical EngineeringHanoi University of IndustryHanoiVietnam
  3. 3.Center of Excellence for Automation and Precision Mechanical EngineeringNguyen Tat Thanh UniversityHo Chi Minh CityVietnam
  4. 4.Faculty of Mechanical EngineeringUniversity of Transport and CommunicationsHa Noi CityVietnam
  5. 5.Faculty of Mechanical EngineeringThai Nguyen University of TechnologyThai Nguyen CityVietnam

Personalised recommendations